Руководство по эксплуатации Bushnell ImageView 78 78-7348

Краткое содержание страницы № 1

15-45x50mm
Spotting Scope
with Digital Camera
Model: 78-7348
LIT. #: 98-0468/09-04

Краткое содержание страницы № 2

® Congratulations on your purchase of the Bushnell ImageView System Requirements: Pentium 166MMX minimum spotting scope! The Bushnell ImageView spotting scope takes (Recommended Pentium II 266) Windows 98 /ME / NT and Windows 2000/XP the technology of digital photography and combines it with a Minimum 32 MB of RAM USB port high-quality compact spotting scope. This allows you to observe Minimum 200 MB of Hard Drive space with additional 65 MB space for IE and DirectX sporting events, w

Краткое содержание страницы № 3

B. LCD Display CAMERA OPERATION INSTRUCTIONS 1. Timer: Select the timer to take a delayed picture. This gives you approximately a A. Button Descriptions 10 second delay. a. The MODE button has three functions: 2. Repeat Shot: Takes 3 continuous shots, 1. Power on: Press and hold button until camera turns on. When camera is with only one press of the SNAP button. connected to a PC via the USB cable provided, the camera will power Shots are approximately 1 second

Краткое содержание страницы № 4

OPERATION GUIDE 8. When in "Normal" mode, press SNAP to take a picture. The counter will advance 1. The camera is powered by two "AAA" batteries (not included) or USB power (via PC connection) by 1 2. Insert two AAA alkaline batteries into battery compartment 3. Press and hold MODE button until camera turns on. 4. Press SNAP to take a picture, or press MODE button quickly to change mode settings as described above. The camera is set at infinity and will not be focused on an

Краткое содержание страницы № 5

12. To enter "Low Resolution" mode, which will cause your 15. If "Delete Last" mode is selected, the display will show the following: pictures to be of a lower resolution, but will also allow you to store many more pictures in the camera’s memory, press the MODE button 3 times until you see the "LQ" icon blinking. Press the SNAP button to select this mode. The "Low" icon delete last picture then quit this mode will then stop blinking. Entering this mode later and pressing SNAP

Краткое содержание страницы № 6

18. If the camera is connected to your PC via USB cable, the display will show 8. Click the “Transfer Photos” button (#3). 9. After several seconds, the driver screen will appear. Click on the “Download photos” button (round red camera icon on bottom left) to start the download from the ImageView to your computer. 10. When the download is finished, you should see “thumbnail” preview frames showing DOWNLOADING THE PICTURES TO YOUR COMPUTER: your photos in the driver window. 1. Connect the US

Краткое содержание страницы № 7

USING THE TRIPOD SPOTTING SCOPE INSTRUCTIONS To pan side to side or up and down, unloosen the tripod control handle by rotating it MOUNTING counterclockwise. To lock into a desired position, rotate the tripod control handle clockwise. Remove the spotting scope from the packaging. Attach the tripod with the provided screw to the tripod mount hole located on the CAUTION: DO NOT LOOK AT THE SUN THROUGH THIS SPOTTING base of the spotting scope. Spread the tripod legs and set on a SCOPE AS

Краткое содержание страницы № 8

TWO-YEAR LIMITED WARRANTY W ARNING ® Your Bushnell product is warranted to be free of defects in materials and workmanship for Make sure you download any pictures from your camera two years after the date of purchase. In the event of a defect under this warranty, we will, at BEFORE you remove the batteries from the camera. our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling,

Краткое содержание страницы № 9

Addendum REMOTE SHUTTER CABLE Whenever possible, using the included remote shutter release cable is recommended to avoid accidentally jarring the camera when the SNAP button is pressed. Due to the high magnification of the camera, any motion when the shutter is open can result in photos with a blurred or shaky appearance. The remote cable is plugged into the jack on the bottom of the camera pod as shown below. Pressing the button on the remote will then take a photo, just as if SNAP was