Краткое содержание страницы № 1
®
Visioneer
®
OneTouch 7600 Series
for USB and Parallel
Installation Guide
Краткое содержание страницы № 2
COPYRIGHT INFORMATION PaperPort 5.3 Software for Windows. Copyright ©1998 Visioneer, Inc. All rights reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. ® AnyPort, AutoFix, AutoLaunch, Visioneer FormTyper, MicroChrome, PaperEnable, PaperLaunch, PaperPort, PaperPort Deluxe, PaperPort ix, PaperPort Links, PaperPort mx, PaperPort OneTouch, PaperPort OneTouch 7600 USB, PaperPort OneTouch 7600 Pa
Краткое содержание страницы № 3
ABLE OF ONTENTS iii T C TABLE OF CONTENTS Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Please Use the Proper Section of This Manual . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Part 1: Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installing the 7600 USB Scanner . . . . . . . . . . . .
Краткое содержание страницы № 4
iv ABLE OF ONTENTS T C Changing the Button Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Selecting Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Getting Help with the Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 23 Adjusting Scan Settings and Page Settings . . . . . . . . . . . . . . . . . 24 Scanning from the PaperPort Software . . . . . . . . . . . . . . . . . . . . . . 28 Scanning an Item with the Twain Butt
Краткое содержание страницы № 5
ELCOME W Congratulations on purchasing your Visioneer OneTouch 7600 flatbed scanner. With your scanner, you can quickly scan paper documents and color photos to place their electronic images on your computer. PLEASE USE THE PROPER SECTION OF THIS MANUAL This manual contains installation instructions for both models of the OneTouch 7600 scanner—the 7600 USB scanner and the 7600 Parallel scanner. Please make sure that you refer to the proper set of ins
Краткое содержание страницы № 6
2 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE Part 1: Installation INSTALLING THE 7600 USB SCANNER This section of the manual contains instructions for the OneTouch 7600 USB. Please see “Installing the 7600 Parallel Scanner” on page 8 if you’re using a OneTouch 7600 Parallel. WHAT YOU NEED To use the 7600 USB scanner and software, you need the following: • IBM PC (or 100-percent compatible) Pentium or equivalent • Microsof
Краткое содержание страницы № 7
THE ONETOUCH 7600 USB SCANNER 3 HE NE OUCH CANNER T O T 7600 USB S Document cover 1 2 Document pad Glass 3 Reference frame 4 Five-Button panel 5 USB port 6 Power jack 7 Document cover. Close the document cover after placing items on the scanner glass. 1 2 Document pad. Helps to secure the document in place on the scanner glass. Glass. Place items face down on top of the glass, in the upper left corner. 3 4 Reference frame. Place items face down within this frame. Both inches an
Краткое содержание страницы № 8
4 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE GETTING HELP The PaperPort software includes a complete set of help topics that answer questions about the scanner and its software. To get help while using the PaperPort software: • Press the F1 key, or from the Help menu, choose PaperPort Help Topics to display the Help Topics window. Tip: If you don’t find the answers in the help or User’s Guide, see the technical support card that you received with your scanner. STEP 1: INSTALLING THE
Краткое содержание страницы № 9
STEP 1: INSTALLING THE PAPERPORT SOFTWARE 5 Note: If the PaperPort CD does not automatically start, make sure the CD drive’s door is completely shut. If the CD still doesn’t start, the autorun option on your computer is turned off. Click the Windows 98 icon that shows the drives on your computer. (Usually, the icon is named My Computer.) The window shows the drives available on your computer. Double-click the icon for your CD-ROM drive to see the list of files on the CD. Double-click the
Краткое содержание страницы № 10
6 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE STEP 2: CONNECTING THE SCANNER TO THE COMPUTER The Visioneer OneTouch 7600 USB scanner connects to any available USB port. Check your computer’s manual for its USB port locations. Note: You do not have to shut off the power to your computer when connecting the Visioneer 7600 USB scanner. To connect the Visioneer 7600 USB scanner: 1. Plug one end of the USB cable into an available USB port. Some newer computers also have keyboards with USB
Краткое содержание страницы № 11
STEP 2: CONNECTING THE SCANNER TO THE COMPUTER 7 When you plug the scanner’s power adapter into a wall outlet an amber light on the front of the scanner comes on indicating that the scanner is receiving power. The light remains amber until the scanner and computer are communicating properly. Then the light turns green. That completes the steps to connect your scanner to the computer. 5. When the software installation is finished, remove the CD from the computer and store it in a safe place.
Краткое содержание страницы № 12
8 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE INSTALLING THE 7600 PARALLEL SCANNER This section of the manual contains instructions for the Visioneer OneTouch 7600 Parallel scanner. WHAT YOU NEED To use the 7600 Parallel scanner and software, you need the following: • IBM PC (or 100-percent compatible) Pentium or higher • Microsoft Windows 95, Windows 98, or Microsoft NT 4.0 • One available parallel (LPT) port on your computer • 16 megabytes (MB) or more of available internal memory
Краткое содержание страницы № 13
THE ONETOUCH 7600 PARALLEL SCANNER 9 THE ONETOUCH 7600 PARALLEL SCANNER 1 Document cover 2 Document pad 3 Glass 4 Reference frame 5 Five-Button panel 6 To Printer 7 To Host PC parallel Power jack 8 1 Document cover. Close the document cover after placing items on the scanner glass. Document pad. Helps to secure the document in place on the scanner glass. 2 3 Glass. Place items face down on top of the glass, in the upper corner next to the buttons. Reference frame. Place items face down within t
Краткое содержание страницы № 14
10 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE GETTING HELP The PaperPort software includes a complete set of help topics that answer questions about the scanner and its software. To get help while using the PaperPort software: • Press the F1 key, or from the Help menu, choose PaperPort Help Topics to display the Help Topics window. The help topics cover the PaperPort software and the scanner. Tip: If you don’t find the answers in the help or User’s Guide, see the technical support c
Краткое содержание страницы № 15
STEP 1: CONNECTING THE SCANNER TO THE COMPUTER 11 4. Plug one end of the scanner cable into the port on the back of the scanner marked “Host.” 5. Plug the other end of the scanner cable into the parallel port on the back of your computer. On some older computers the serial port and parallel port both have 25-pin connectors that fit the scanner cable. Please make sure you plug the scanner cable into a parallel port. 6. If you unplugged a printer from the parallel port earlier, plug it into th
Краткое содержание страницы № 16
12 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE 7. Plug the power adapter cable into the jack on the scanner. 8. Plug the power adapter into an AC (wall) outlet. The following diagram shows the completed cable connections. When you plug the scanner’s power adapter into a wall outlet an amber light on the front of the scanner comes on indicating that the scanner is receiving power. The light remains amber until the scanner and computer are communicating properly. Then the light turns g
Краткое содержание страницы № 17
STEP 2: INSTALLING THE PAPERPORT SOFTWARE 13 STEP 2: INSTALLING THE PAPERPORT SOFTWARE The PaperPort CD includes all the PaperPort software files. The CD also includes the PaperPort User’s Guide, the manual for your PaperPort software. You can read the guide while the CD is running, or print a copy directly from the CD. To install the PaperPort software: 1. Start Microsoft Windows and make sure that no other applications are running. 2. Insert the PaperPort CD into your computer’s CD-ROM drive
Краткое содержание страницы № 18
14 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE CHECKING IT OUT This section of the manual applies to both models of the Visioneer OneTouch scanner—the 7600 USB scanner and the 7600 Parallel scanner. The OneTouch scanner software adds the scanner icon to the Windows taskbar (at the bottom right corner of the computer screen). If the scanner icon looks like the one shown in the figure, the scanner is properly connected. Scanner Icon If the icon has a red X through it, the scanner is no
Краткое содержание страницы № 19
CHECKING IT OUT 15 3. Choose About from the shortcut menu. A dialog box confirms that the scanner is connected properly. The About dialog box shown below is for the 7600 USB scanner. The dialog box for the 7600 Parallel scanner is similar. 4. Click OK to close the dialog box. That’s it. Your scanner is ready to scan. See “Scanning By Pressing the OneTouch Buttons” on page 18. IF THE SCANNER IS NOT PROPERLY CONNECTED If the scanner icon on the Windows taskbar has a red “X” through it as shown i
Краткое содержание страницы № 20
16 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE drive or SyQuest drive which must be connected directly to the computer and the scanner then connected to the drive). Plug the scanner into the computer’s parallel port first, then plug the next device into the scanner. • Did you restart the computer after installing the software? If you didn’t restart the computer, it may not have loaded all of the software files. Try restarting your computer. Please see the Readme file in the PaperPort di
