Краткое содержание страницы № 1
OPERATION MANUAL
Day and Night / WDR
OSD COLOR CAMERA
HCC-745NTW/PTW
READ AND KEEP THIS OPERATION MANUAL
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance(servicing) instructions in the literature
-1 -
accompanying the appliance.
Краткое содержание страницы № 2
CAUTION: TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE RISK OF ELECTRIC SHOCK PARTS INSIDE. PREFER SERVICING TO QUALIFIED DO NOT OPEN SERVICE PERSONNEL. Indicate a potentially hazardous situation which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. Warning: This equipment generates and uses radio frequency energy and if not installed and used properly, I.e., in strict accordance
Краткое содержание страницы № 3
CAUTION FOR SAFE OPERATION 1. Water and Moisture 8. When operation is incorrect or a malfunction is observed To prevent fire or shock hazard, do not expose this camera While operating, if any abnormal condition (strange sound, to rain or moisture. smell or smoke) or a malfunction (no pictures, etc.) is observed, stop using the camera immediately, turn the power off, then contact your supplier. 2. Servicing Do not attempt to disassemble or repair by yourself. 9. Cleaning You may be e
Краткое содержание страницы № 4
CONTENTS 1. Features ----------------------- 5 2. Names & Functions ----------------------- 6 3. Installation ----------------------- 8 4. Remote Control Connections ----------------------- 10 5. On Screen Display ----------------------- 11 6. Specifications ----------------------- 19 7. Dimensions ----------------------- 20 Thank you for using this OSD Color Camera with Day and Night, WDR. To get the best efficiency, read carefully all instructions in this manual before use, and keep this m
Краткое содержание страницы № 5
1. Features Honeywell’s HCC-745NTW/PTW Series is a high sensitivity CCD color camera with high sensitivity function of Day & Night function and field integration technique. ▣ 1/3” Double Scan Color CCD ( NTSC: 410,000 / PAL: 470,000 ) ▣ Outstanding BLC implementation with WDR(Wide Dynamic Range) function. ( 3 steps available : OFF / BLC / WDR ) ▣ Adapted CS/C mount lens adjustable. ▣ Excellent signal-to-noise ratio of more than 50dB. ▣ High Sensitivity : Minimum illumination of 0.001lx @ F1.
Краткое содержание страницы № 6
2. Names & Functions LENS CONNECTOR Connect Auto Iris Lens plug C/CS Mount Adaptor • C-Mount lens : Turn Counterclockwise • CS-Mount lens : Turn Clockwise Set Screw Loosen Locking Ring to adjust mounting ring -6 -
Краткое содержание страницы № 7
(+) BUTTON VIDEO OUTPUT This is the output terminal for composite video signal (UP) BUTTON (-) BUTTON POWER ON LAMP In power ON state, this LED is ON . MENU BUTTON (DOWN) BUTTON POWER INPUT TERMINAL Lens Type Select Switch DC Lens : with no iris amp. VSD Lens : with iris amp. CAMERA CONTROL CONNECTOR ( Refer to 4. Camera Control Methods ) -7 -
Краткое содержание страницы № 8
3. Installation 3.1 The packing box should include, in addition to this User Guide: -. One HCC-745NTW or HCC-745PTW camera -. One 6-pin connection cable ( G-113510-200 ) -. One Auto Iris lens plug 3.2 Mounting a Lens 3.2.1 C/CS Mount Lens ① Remove the protective cap in front of the camera. ② Adjust the mount ring whether it is for C or CS. ③ Loosen Set Screw. ④ Turn the mount ring counterclockwise in case of C-Mount Lens. Turn the mount ring clockwise in case of CS-Mount Lens 3.2.2 Auto Iris
Краткое содержание страницы № 9
④ Set the switch on the rear of the camera to DC or VSD. ☞ Use the connection recommended by the manufacturer. (E4-191, Chuo Musen, Japan) For best practices, read the lens manual carefully. You may need to set the flange back focus. 3.3 Flange back focus adjustment 3.3.1 Fixed Lens a. Loosen the setscrew and set the lens focus ring to infinity ( ∞). b. Turn the back focus adjustment ring until you see a clear image (the distance from the camera to the object is more than 23m). c. Tighten th
Краткое содержание страницы № 10
1. Red : Not Use 4. Remote Control Connections 2. Blue : RD(TxD) 3. Yellow : TD(RxD) 4. Black : GND 5. Red : Not Use 4.1 RS-232C connection ( HCC-745NTW/PTW ) 6. Black : Not Use Connect to Serial PORT Serial Cable 6P Cable RS232C Serial Cable 6P Cable ( 9 Pin D-Sub ) RD ( TxD ) RD 2 2 3 TD 3 TD ( RxD ) 5 SG 4 GND 4 Connect internally 6 for communication 7 8 4.2 RS-485 connection ( HCC-745NTW/PTW-VR ) RS485 Converter Connect to Serial PORT 6P Cable Serial Cable RS485 RS485 Converter 6P Cable 1.
Краткое содержание страницы № 11
FUNCTION OSD Format DESCRIPTION ① ZOOM Dx2.5 >>TELE Zoom TELE DISPLAY Dx1.0 << WIDE Zoom WIDE 5. On Screen Display ② CAMERA ID None display ID : 0 ID : 002 ID : 1 ~ 255 ②, ③ ②, ③ TITLE ■■… ■■ See 5.11 ③ ⑤ ④ ⑥ ④ Back Light Non display Back Light OFF BL Back Light ON Shutter 1/60 (1/50) NTSC:1/60, PAL :1/50 ⑤ Speed FL NTSC:1/120, PAL:1/100 1/250 1/250 ②, ③ ① 1/500 1/500 1/1000 1/1000 1/2000 1/2000 5.1 Understanding the On-Screen Display 1/4000 1/4000 a. Press
Краткое содержание страницы № 12
5.2 Display SETUPMENU a. Press and hold the MENU (center) button for 2 seconds to display the Setup << SETUP MENU >> GENERAL SETTING menu. AE MODE b. Press the UP or DOWN buttons to select a menu item. WB MODE NIGHTSHOT MODE 5.3 Move from SETUPMENU to submenu BLC/WDR MODE a. Press the MENU button to enter the selected submenu. PZM SETTING b. Press the + or – buttons to increase/decrease the value of the selected item. CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT 5.4 Saving your Setting
Краткое содержание страницы № 13
⑤ LENS ADJUSTMENT << AE MODE >> : Adjust level for DC / VSD lens. While it is adjusting, it displays “Adj-ing”, after it is completed, it displays “Done”. ELC ① MODE LENS ADJ. Adj-ing → Done ② CONTROL AUTO ③ MAN. SHUTTER 1/60 ☞ Notice For the better adjustment, set LEVEL on VSD lens to middle value. ④ MAN. AGC OFF Done ⑤ LENS ADJ. ⑥ BRIGHTNESS ⑥ BRIGHTNESS 60 : Adjust level of Auto Iris. The smaller brightness value is, the darker it is, ⑦ MAX GAIN 34dB becaus
Краткое содержание страницы № 14
② CONTROL ATW AUTO << WB MODE >> IN 3200 °K USER ① MODE OUT 5400 °K ② CONTROL R/B CONT MANUAL R<-->B AWC LOCK → PUSH ③ RED GAIN 1 AWC AUTO ④ BLUE GAIN 2 FLUORES. 4200 °K RETURN USER R/B CONT 1. MANUAL : Press + or – button to adjust RED GAIN, BLUE GAIN automatically to fit Black Body. 2. PUSH : Press + or – button to start the AWC operation. LoCK : Release the key to fit the present shooting scene’s white balance ③ RED GAIN (USER mode) RED GAIN 0 → 1 → …. → 254 → 2
Краткое содержание страницы № 15
⑤ NIGHT COLOR << NIGHTSHOT MODE >> : Set the color mode as B/W (monochrome) or COLOR in Night mode. AUTO ① MODE NIGHT COLOR B/W → COLOR → …. 3sec. ② DETECT TIME 3 ☞ Notice ③ D →N LEVEL MODE must be set to AUTO or ON. 7 ④ N →D LEVEL B/W ⑤ NIGHT COLOR RETURN << BLC/WDR MODE >> ① MODE WDR ② LEVEL 8 RETURN 5.8 NIGHTSHOT MODE ① MODE : The Nightshot menu allows you to set how the camera reacts to changes in low light illumination and to set when
Краткое содержание страницы № 16
③ Horizontal Start position << PRIVACY ZONE >> H START 200 ZONE 1 ① ZONE NUM. ④ Horizontal End position ② CONTROL ON H END 300 ③ H START 200 ④ H END 300 ⑤ Vertical Start position 50 V START 50 ⑤ V START ⑥ V END 100 ⑥ Vertical End position ⑦ PZM MASKING BLACK V END 100 RETURN ⑦ MASKING COLOR : Choose the color to mask the PZM zone. 10 color (Black,Gray, PRESS MENU TO MOVE Light Gray,White,Red,Blue,Green,
Краткое содержание страницы № 17
④ Title << CAMERA ID SETTING >> : It is the name of Camera. It enters 10 characters including blank.. TITLE: ■ ■■ ■■■ ■■ ■■ ① CAMERA ID 000 ② DISPLAY TITLE ▣ How to Enter the Title ▣ ③ POSITION R.BOT Let’s enter the Title as “R1” , example -. Select the position of title character by using (+) or (-) key. ⓐ ABCDEFGHIJKLMNOPQRST The chosen position is blinking. ⓑ UVWXYZabcdefghijklmn ⓒ opqrstuvwxyz12345678 TITLE: □ ■■ ■■ ■■ ■ ■■ ⓓ 9!?#$%&<>*,.:;/+-=~ ■ -. Select the character “R” among ⓑ ~ ⓕ
Краткое содержание страницы № 18
<< SPECIAL FUNCTION >> ⑥ PROTOCOL : Use to communicate through RS232C, RS485. ① MIRROR OFF PROTOCOL DEFAULT → VCL → KD6 → P/D → .... ② SHARPNESS 10 ③ NEGATIVE OFF ⑦ Function OSD Display OSD DISP ALL → NONE → TOP → BOTTOM → .... ④ FREEZE OFF ALL : Whole Function OSD display ⑤ BAUDRATE 9600bps ( Focus Mode, Key state, Zoom Ratio, ID ) ⑥ PROTOCOL DEFAULT TOP : Only Upper OSD display ( Focus Mode, key state ) ⑦ F.OSD DISP ALL BOTTOM : Only Lower OSD disp
Краткое содержание страницы № 19
6. Specifications Model Name HCC-745NTW HCC-745PTW Pick-up Device 1/3” Sony Double Scan Color CCD Total/Effective Pixels 410,000 / 380,000 470,000/440,000 Scanning System 525 lines, 2:1 Interlace Digital Zoom Ratio X1.0 ~ x2.5 can be adjustable Sync System Internal / External (L/L ), Auto detecting selectable H.Resolution 480 TV lines 470 TV lines S/N Ratio more than 50 dB ( AGC OFF ) Min. illuminance 0.2lx @50IRE, AGC 38dB, Night OFF; 0.01lx @50IRE, AGC 38dB, Night OFF, DSS 510fields; 0.01lx
Краткое содержание страницы № 20
7. Dimension -20 -
