Краткое содержание страницы № 1
LevelOne
FCS-1000
IP Network Camera
WCS-2000
Wireless IP Network Camera
User’s Manual
VERSION 1.0
Краткое содержание страницы № 2
Table of Contents CHAPTER 1 INTRODUCTION.............................................................................................. 1 Overview ............................................................................................................................ 1 Physical Details.................................................................................................................. 3 Package Contents .......................................................................
Краткое содержание страницы № 3
P/N: 9560GF01A0 Copyright 2003. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. ii
Краткое содержание страницы № 4
Chapter 1 Introduction 1 This Chapter provides details of the LevelOne IP Network Camera's features, components and capabilities. Overview The LevelOne IP Network Camera has an Integrated Microcomputer and a high quality CMOS digital-Image-Sensor, enabling it to display high quality live streaming video over your wired LAN, the Internet, and for the WCS-2000, an 802.11b Wireless LAN. Using enhanced MPEG-4 technologies, the LevelOne IP Network Camera is able to stream high quality vid
Краткое содержание страницы № 5
• Suitable for Home, Business or Public Facilities. Whether for Home, Business or Public Facility surveillance, or just for entertainment and fun, the LevelOne IP Network Camera has the features you need. • Multi-Protocol Support. Supporting TCP/IP networking, SMTP (E-mail), HTTP and other Internet related protocols, the LevelOne IP Network Camera can be easily integrated into your existing network. • Easy Configuration. A Windows-based Wizard is provided for initial setup. Subseque
Краткое содержание страницы № 6
Physical Details Figure 2: LevelOne IP Network Camera Front-mounted LEDs On - Power on. Ready Off - No power. Blinking - The Ready LED will blink during start up. This will take 15 to 20 seconds. Off - Idle. Active Blinking - LevelOne IP Network Camera is providing a live video stream to at least one viewer. LAN On - LAN port is active. Off - LAN port is not available. Blinking - Data is being transmitted or received via the LAN port. Wireless On - Wireless interface is activ
Краткое содержание страницы № 7
Password settings will be set to their default values. • IP address: 192.168.0.99 • Administrator ID: administrator • Administrator Password: null (no password) Note: After this procedure is completed, all LEDs will blink three times to confirm that the reset was completed successfully. Package Contents The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately. 1. The LevelOne IP Network Camera 2. Installation CD-RO
Краткое содержание страницы № 8
Chapter 2 Basic Setup 2 This Chapter provides details of installing and configuring the LevelOne IP Network Camera. System Requirements • To use the LAN interface, a standard 10/100BaseT hub or switch and network cable is required. • To use the Wireless interface on the WCS-2000, other Wireless devices must be compliant with the IEEE802.11b specifications. All Wireless stations must use compatible settings. Installation Figure 3: LevelOne IP Network Camera Installation 1. Mount t
Краткое содержание страницы № 9
For the WCS-2000, this disables the Wireless Interface, because only one interface can be active. The LAN interface is recommended for initial configuration. The default Wireless settings for the WCS-2000 are: Mode: Infrastructure Channel: 11 ESSID: wireless WEP: Disabled 3. Adjust the Antenna On the WCS-2000, flip the top-mounted Antenna to the upright position to improve wireless reception. 4. Power Up Connect the supplied power adapter to the LevelOne IP Network Camera and
Краткое содержание страницы № 10
Setup Initial setup should be performed using the supplied Windows-based setup Wizard. This program can locate the LevelOne IP Network Camera even if its IP address is invalid for your network. You can then configure the LevelOne IP Network Camera with appropriate TCP/IP settings for your LAN. Subsequent administration can be performed with your Web browser, as explained in Chapter 3 - Web-based Administration. Setup Procedure 1. Insert the supplied CD-ROM into your drive. If the setu
Краткое содержание страницы № 11
4. Select the desired Camera from the list on the left. The current settings for the selected Camera will be displayed in the table on the right. 5. Click Next to continue. 6. If the Administrator ID and Password have been set, you will be prompted to enter them, as shown below. Enter the Administrator ID and Password set on the User screen. Figure 6: Password Dialog By default, the Administrator ID and password are blank. However, you should assign a name and password, on the "Us
Краткое содержание страницы № 12
Figure 8: TCP/IP Settings 9. Enter the desired IP address values: • Enter an unused IP Address from within the address range used on your LAN. • The Subnet Mask and Default Gateway fields must match the values used by PCs on your LAN. • Click Next to continue. Figure 9: Camera Settings 10. This screen allows you to enter a suitable Description, and set the correct Date, Time, and Time Zone. Make any desired changes, then click Next to continue. 9
Краткое содержание страницы № 13
Figure 10: Save Screen 11. This screen displays all details of the LevelOne IP Network Camera. Click Save if the settings are correct, or click Back to modify any incorrect values. 12. After clicking Save, you will see the screen below. You can click the Web UI button to connect to the camera using your Web Browser. Using the Web UI is required in order the change the Wireless settings for the WCS-2000, on the Network screen. The default Wireless settings for the WCS-2000 are:
Краткое содержание страницы № 14
Chapter 3 Setup for Viewing 3 This Chapter provides information about the optional settings and features for viewing video via the LevelOne IP Network Camera. This Chapter is for Administrators only. Introduction After finishing setup via the Windows-based Wizard, the LevelOne IP Network Camera can immediately be used by all users on your LAN. This chapter describes some additional settings and options for viewing live Video: • Adjusting the video image • Controlling user access to
Краткое содержание страницы № 15
Figure 12: Image Screen 3. Make the required adjustments, and save your changes. 12
Краткое содержание страницы № 16
Controlling User Access to the Video Stream By default, all users can connect to the LevelOne IP Network Camera and view live Video. If desired, you can limit access to known users, by requiring each user to login to the LevelOne IP Network Camera with their individual username and password. To Enable this feature: 1. Connect to the Web-based interface of the LevelOne IP Network Camera. (See Chapter 4 - Web-based Management for details.) 2. On the Administration menu, select User. 3. S
Краткое содержание страницы № 17
Making Video available from the Internet If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and Broadband modem, you can make the LevelOne IP Network Camera available via the Internet. LevelOne IP Network Camera Setup The LevelOne IP Network Camera configuration does NOT have be changed, unless: • You wish to change the port number from the default value (1024). • You wish to use the DDNS (Dynamic DNS) feature of the LevelOne IP Network Camera. Second Por
Краткое содержание страницы № 18
Figure 15: DDNS Settings - Network Screen 3. Operation is then automatic: • The LevelOne IP Network Camera will then automatically contact the DDNS server whenever it detects that the Internet IP address has changed, and inform the DDNS server of the new IP address. • Internet users can then connect to your LAN using the Domain Name allocated by the DDNS service provider. Router/Gateway Setup Your Router or Gateway must be configured to pass incoming TCP (HTTP) connections (from Vie
Краткое содержание страницы № 19
Viewing via the Internet Clients (viewers) will also need a broadband connection; dial-up connections are NOT recommended. Using the Windows Viewing/Recording Utility If using the Windows Viewing/Recording Utility, the details of the LevelOne IP Network Camera must be entered on the Internet tab of the Add Camera screen. Figure 17: Add Camera from Internet You can then select the camera in the Cameras list on the main screen, and click View to establish a connection and view live vid
Краткое содержание страницы № 20
Motion Detection/E-mail Alerts The Motion Detection feature will capture a short video and send it to your E-mail address when motion is detected. The LevelOne IP Network Camera will compare consecutive frames to detect changes caused by the movement of large objects. But the motion detector can also be triggered by: • Sudden changes in the level of available light • Movement of the camera itself. Try to avoid these situations. The motion detection feature works best in locations whe
