Краткое содержание страницы № 1
Internet Camera
ICA-100/ICA-100W
User’s Manual
Краткое содержание страницы № 2
Copyright Copyright (C) 2003 PLANET Technology Corp. All rights reserved. The products and programs described in this User ’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copy- righted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-reada
Краткое содержание страницы № 3
TABLE OF CONTENTS CHAPTER 1 INTRODUCTION ......................................................................................1 ICA-100/ICA-100W Features .................................................................................1 Package Contents .................................................................................................2 Physical Details .....................................................................................................2 CHAPTER 2 INSTALLAT
Краткое содержание страницы № 4
Chapter 1 Introduction 1 This Chapter provides an overview of Internet Camera 's features and capabilities. Internet Camera provides a low cost solution for enterprise and SOHO users to en- hance the ability of network environment. By connecting directly to an Ethernet or Fast Ethernet, the high quality video image can be monitored everywhere. The main differ- ence from the conventional PC Camera is that Internet Camera is a standalone system. There is no need to attach another computer
Краткое содержание страницы № 5
Broadband Router User Guide Motion Detection Monitor any suspicious movement in a specific area. Wired and Wireless Network Support.(ICA-100W only) ICA-100W provides both wired and wireless function. You can use ICA-100W in differ- ent LAN environment by simple mode switching. Package Contents The following items should be included: • Internet Camera unit • Camera Stand Accessory • Power Adapter • CD-ROM • Quick Installation Guide • Wireless Antenna*2 (ICA-100W only) If any of the a
Краткое содержание страницы № 6
Introduction There are three settings for the Power and LAN ( /WLAN ) LED to control the light illumination for monitoring purpose from Normal / Off / Dummy. Please refer to the Web Configuration section for detailed information and usage. Rear Panel Figure 1-2: Rear panel of ICA-100 Figure 1-3: Rear panel of ICA-100W Network Cable Connector Internet Camera provides an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should
Краткое содержание страницы № 7
Broadband Router User Guide begins to light up, then release the reset button and the Power LED will begin to flash indicating ICA-100 is changing to factory reset. When factory reset is completed the IP address will return to the default setting as 192.168.0.20. Factory Reset of ICA-100W: Press the reset button for three seconds or until Power LED begins to light up, then release the reset button and the Power LED will begin to flash indicating ICA-100W is changing to factory reset. When
Краткое содержание страницы № 8
Introduction Figure 1-5:Top Panel of ICA-100W Screw Hole Located on the top panel of ICA-100 series, the screw hole is used to connect the camera stand onto ICA-100 series by attaching the screw head on the camera stand into the screw hole of ICA-100 series. Bottom Panel Figure 1-6 Bottom Panel Screw Hole Located on the bottom panel of ICA-100 series the screw hole is used to connect the camera stand onto ICA-100 series by attaching the screw head on the camera stand into the
Краткое содержание страницы № 9
Chapter 2 Installation 2 This Chapter covers the physical installation of ICA-100 Series. Requirements ICA-100 ICA-100W Network Environment LAN 10/ 100M Ethernet 10/ 100M Ethernet IEEE 802.11b Wireless LAN Monitoring System Recommended to Access ICA-100 series • CPU: Pentium II, 266 MHz or above System Hardware • Memory Size: 32 MB (64 MB recommended) • VGA card resolution: 800x600 or above • Internet Explorer 5.0 or above (ActiveX & JAVA Mode – Web Browser Image View for Wind
Краткое содержание страницы № 10
Installation Figure 2-1: Camera Stand Hardware Install Procedure ICA-100 1.Connect an Ethernet cable Connect one end of an Ethernet cable to the LAN port located on the ICA-100 rear panel and attach the other end to the network device (hub or switch). 2.Attach the external power supply Connect the provided power adapter to the ICA-100’s connector labeled "5VDC" on rare panel. 3.Check the LEDs The PWR and ACT LEDs should be on. ICA-100W 1.Attach Wireless Antenna (LAN+WLAN
Краткое содержание страницы № 11
Chapter 3 Configuration 3 This Chapter provides details of the software configuration process. Login ICA-100 series must be configured through its built-in Web-based Configuration. Extensive knowledge of LAN will be helpful in setting up. From the web browser, type http ://192.168.0.20 in the address box to access Home page of ICA-100 series. If you can't connect If ICA-100 series do not respond, check the following: • Machine is properly installed, LAN or WLAN connection is OK, an
Краткое содержание страницы № 12
PC Configuration Figure 3-1:Home Page System Administration Click on “System Administration” from the Home page to access the settings re- quired for ICA-100 series. There will be several options in the menu bar to choose from to set your Internet Camera and they are as follows: • System • Image • Users • DateTime • Trigger • Upload • Information • Tools System The System menu contains commands for settings that are required for inputting key details to set-up ICA-100 series for
Краткое содержание страницы № 13
Broadband Router User Guide 10
Краткое содержание страницы № 14
PC Configuration Figure 3-2: System Screen of ICA-100W Camera Name: This field is used for entering a descriptive name for the device. The default setting for the Camera Name is CS-xxxxxx, where xxxxxx is the last six digit of the MAC Address. The maximum length is 32 (Printable ASCII). Location: This field is used for entering a descriptive name for the location used by ICA-100 series. Admin: This field is used for entering the Administrator ID along with the password to access the S
Краткое содержание страницы № 15
Broadband Router User Guide Enter the URL of the DDNS service provider whom you registered to. Host Name Enter the hostname you registered. User Name Enter the user name that used to login the DDNS web site. Password Enter the password of your account. Wireless Interface: (ICA-100W only) Connection Mode: Use the Connection Mode to determine the type of wireless communication for ICA- 100W. There are three choices of Infrastructure mode, 802.11 Adhoc mode and Adhoc mode. The default se
Краткое содержание страницы № 16
PC Configuration Click on ASCII or HEX check box to select input format as ASCII format or HEX format, and then input WEP key. To Confirm the WEP key you must enter the data once again in the Confirm WEP Key field. ASCII input format: ASCII format causes each character to be interpreted as an eight-bit value. All unaccented upper- and lower-case Western European characters that can be input through your keyboard's typing zone are valid. To setup 64-bit WEP key, input 5 ASCII characters,
Краткое содержание страницы № 17
Broadband Router User Guide Note: This function is built-in to the LED indicators to add extra capabilities. The three options allow the Administrator to configure and camouflage the illumination for the LED indicator to falsify the monitoring status. In Normal Mode the LED indicator func- tions as normally. Under Off Mode the LED indicators are both off however, it is still monitoring the activity. In Dummy Mode the LED indicators operate in monitoring condition but monitoring activity is
Краткое содержание страницы № 18
PC Configuration Image Image menu in the system administration contains commands to provide the settings for the images captured by ICA-100 series. Click on “Image” in the system administra- tion menu bar and the Image screen will appear as illustrated below: Figure 3-3: Image Screen Video Resolution: Select the desired video resolution format ranging from 320x240 (default) or 640x480. Compression Rate: Select the desired compression rate with five levels from very low to very high. Hi
Краткое содержание страницы № 19
Broadband Router User Guide After making sure all settings in the Image are correct, click on the “Save” icon to store the settings for ICA-100 series. You can alternatively click on the “Cancel” icon to restore all settings to the values last saved to or retrieved from ICA-100 series. Users The User options menu contains commands to allow system administrator to assign legal users who are permitted to monitor ICA-100 series from the remote site. Click on “Users” in the system administrat
Краткое содержание страницы № 20
PC Configuration Figure 3-5: User Login Screen DateTime The DateTime menu contains commands for setting ICA-100 series' time and date requirements to provide correct information to users who might be thousands of miles away in the remote site. There are two options to select from the DateTime menu bar either Synchronized with Time Server or Set Manually. Click on “DateTime” in the system administration menu bar and the DateTime screen will appear as illustrated below: Figure 3-6: Da
