Руководство по эксплуатации Knoll Systems MR64

Краткое содержание страницы № 1

MR64 keypad installation
MR64 Keypad
Individual rooms can be controlled by a MR64,
Installation
MR60 and/or an RB8 remote control or a
Instructions
universal remote control with the RB8

commands installed. MR60 and MR64 keypads
Congratulations and thank you for choosing this
control the speakers for the room it is located
Knoll product. The MR64 keypads are the power
in or the whole house (all rooms). The RB8
behind an advanced music control system that
remote can turn off the wh

Краткое содержание страницы № 2

The dipswitch 1 is set to ON (dipswitch 2 and 3 connections, wiring layout and even try are set to OFF) if this keypad is to control amp recrimping the connectors or replacing the RJ45 A1 or B1 and the speakers in this room are connectors with new ones. Verify that the wires connected to A1 or B1. are connected to the correct bank on the rear of the controller (A or B). If this keypad is to control amplifier B1 then the cat 5 wire from this keypad can be connected to slot B1, B2 or B3

Краткое содержание страницы № 3

necessary to have the source wires connected SET C to program the MR64 labels. Source C Using the back of this manual, please write down the source name connected to source A, As above press the UP or DOWN buttons next source B, source C and source D. to the INPUT buttons to scroll through the label selections for source C on the bottom row Turn the MVP44a, MVP64a on using the power of the LCD display. When the correct selection button on the front panel or the MR640 by is display

Краткое содержание страницы № 4

Source Labels As of version 3.3 the source labels are: CD, CD2, FM, AM, SAT, SAT2, AUX, AUX2, MP3, TV, DVD, DVD2, PC, DEC, MC-PC, MCEx, JAZZ, POP, COUNTRY, NEWS, CLASSIC, HIPHOP, ROCK, CONTEMP, RAP, SPORTS, TALK, IPOD Source A ______________________________ Source B_______________________________ Source C ______________________________ Source D_______________________________ Date of Install