Краткое содержание страницы № 1
model g 0562z /g 0562zp /
g 1030z 2/g 1030z 2p
dust collector
o Wner 's manual
(For models manufactured since 11/11)
g 1030z2
247570
g 0562z
Copyright © DECEMBE r , 2011 By g rizzly in Dustrial, in C.
Warning: no portion of this manual may be reproduced in any shape
o r form Without the Written approval of g rizzly industrial, inc.
#Bl 14619 print ED in tai Wan
Краткое содержание страницы № 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to
Краткое содержание страницы № 3
t able of c ontents introduction ............................................... 2 section 5: operations ........................... 28 Manual accuracy ........................................... 2 general ........................................................ 28 Contact info.................................................... 2 Machine storage .......................................... 28 Machine Description ...................................... 2 section 6: accessories .....................
Краткое содержание страницы № 4
introduction manual a ccuracy c ontact info We stand behind our machines. if you have any We are proud to offer this manual with your new service questions, parts requests or general ques- machine! We've made every effort to be exact tions about the machine, please call or write us at with the instructions, specifications, drawings, and the location listed below. photographs of the machine we used when writ- ing this manual. however, sometimes errors do grizzly industrial, inc. happen and
Краткое содержание страницы № 5
identification Filter Canister Filter Bag Filter Cleaning handle Collector outlet Connector Collection Bag inlet Connector 3-port Motor on/oFF Caster inlet paddle switch Connector t o reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations. figure 1. rear view identification. figure 2. Model g0562z/g1030z2 identification. -3- Model g 0562z /zp, g 1030z2/z2p (Mfg. 11/11+)
Краткое содержание страницы № 6
machine data sheet MODEL G0562Z/G0562ZP, G1030Z2/1030Z2P DUST COLLECTORS model number g0562z/g0562zp g1030z2/g1030z2p product dimensions Weight 187 lbs. 156 lbs. Width (side-to-side)/Depth (front- 57-7/8 x 32 x 71 in. 49-1/2 x 21-1/2 x 78 in. to-back)/height Foot print (Width/Depth) 49-1/2 x 21-1/2 in. shipping dimensions carton 1 type Cardboard Content Machine Weight 165 lbs. 170 lbs. Width (side-to-side)/Depth (front- 52 x 23 x 24 in. 51 x 22 x 23 in. to-back)/height carton 2 type Cardboad Co
Краткое содержание страницы № 7
model number g0562z/g0562zp g1030z2/g1030z2p operation information type Canister Bag air suction Capacity 2320 CFM 2300 CFM Maximum static pressure 16.9 in. 16.7 in. Main inlet size 7 in. Manifold included yes Manifold inlets 3 Manifold inlet size 4 in. Maximum Material Collection 11.4 cu. ft. Capacity Canister or upper Bag Filtration 1 Micron 2.5 Micron bag information number of upper Bags na 2 upper Bag Capacity na 5.7 cu. ft. upper Bags total area na 5.7 cu. ft. upper Bag Diameter na 19-1/2
Краткое содержание страницы № 8
section 1: safety For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indica
Краткое содержание страницы № 9
DISCONNECTING POWER SUPPLY. GUARDS & COVERS. NEVER STAND ON MACHINE. APPROVED OPERATION. STABLE MACHINE. DANGEROUS ENVIRONMENTS. AWKWARD POSITIONS. ONLY USE AS INTENDED. UNATTENDED OPERATION. OFF USE RECOMMENDED ACCESSORIES. MAINTAIN WITH
Краткое содержание страницы № 10
a dditional safety for dust c ollectors INTENDED USE. SUSPENDED DUST PARTICLES AND IGNITION SOURCES. FIRE SUPPRESSION. HAZARDOUS DUST. IMPELLER HAZARDS.
Краткое содержание страницы № 11
section 2: po Wer supply availability Serious injury could occur if you connect the machine to power before completing the setup process. DO NOT connect to power until instructed later in this manual. circuit information
Краткое содержание страницы № 12
grounding requirements
Краткое содержание страницы № 13
section 3: setup needed for setup t his machine presents serious injury hazards t he following are needed to complete the setup to untrained users. r ead process, but are not included with your machine: through this entire manu- al to become familiar with description Qty the controls and opera- • safety g lasses (for each person) ............... 1 tions before starting the • o pen End Wrench 12mm ........................... 1 machine! • phillips h ead s crewdriver..........................
Краткое содержание страницы № 14
c. Motor and impeller assembly ..................... 1 inventory d. 7" inlet w/three 4" Fittings ......................... 1 e. Base plate .................................................. 1 f. Metal “y” outlet .......................................... 1 g. Collector (left) ............................................ 1 h. Collector (right) .......................................... 1 i. hardware Bag ...........................
Краткое содержание страницы № 15
site c onsiderations Weight Load Physical Environment Machine Data Sheet
Краткое содержание страницы № 16
4. place a rubber gasket around the impeller assembly outlet rim, as shown in figure 11. t o assemble your dust collector: gasket 1. place the base upside down on a clean, flat surface (to avoid scratching the paint). 5 2. attach the casters to the base with (16) ⁄16"- 1 18 x ⁄2" flange bolts, as shown in figure 9. x 16 figure 11. positioning impeller outlet gasket. 5. secure the metal "y" outlet to the impeller 5 1 outlet with (8) ⁄16"-18 x ⁄2" flange bolts, as shown in figure 12. figure 9.
Краткое содержание страницы № 17
6. align each of the collector supports with the 8. attach the top of the canister support to the 5 1 mounting holes on the base, as shown in collector with (2) ⁄16"-18 x ⁄2" flange screws, figure 13, then secure them in place with (4) as shown in figure 14. 5 1 ⁄16"-18 x ⁄2" flange bolts. g1030z2/g1030z2p only: place the upper bag support over the canister support and 5 1 secure it with (2) ⁄16"-18 x ⁄2" flange bolts, as shown in figure 15. Collector support upper Bag support Canister x
Краткое содержание страницы № 18
10. affix the wide foam strip around the outside 13. g0562z/g0562zp only: top rim of the collector, as shown in figure 17. a. install the canister handle onto the top of the canister filter by tightening the bolt against the flat of the shaft (see figure 20). Flat figure 17. installing wide foam strip. 11. trim the excess foam strip so the ends come together evenly, as shown in figure 18. figure 20. installing canister handle. b. place the canister filter on top of the collectors. c. posit
Краткое содержание страницы № 19
g1030z2/g1030z2p only: 14. hook the clear collection bag on the hooks around the bottom of the collector to hold the a. h ook the top loop of the upper filter bag in place for the next step. bags (fabric) over the upper bag sup- ports, as shown in f igure 22. 15. tighten the belt clamp around the narrow foam strip to seal and secure the lower col- lection bag (figure 24). note: DO NOT force the clamp. If it will not close, choose the next notch over, then clamp in place. figure 22. attachi
Краткое содержание страницы № 20
connecting power power c onnection 1. turn the machine power switch off. 2. insert the power cord plug into a matching after you have completed all previous setup power supply receptacle. the machine is instructions and circuit requirements, the machine now connected to the power source. is ready to be connected to the power supply. t o prevent accidental damage to the power cord, make sure it is kept away from potential damage sources at all times —whether connected or not. potential d
