Краткое содержание страницы № 1
Thank You for Selecting Thank You for Selecting Thank You for Selecting
Thank You for Selecting Thank You for Selecting
The Powerful QL Series Truck Loader Vacuum
Operator Owner's Manual
QL2000VE
Specifications
Optional Accessories
QL2000VE
INTAKE
ENGINE: H.P. 20 H.P. TWIN OHV VANGUARD
HOSE REPLACEMENT KIT P/N 790211
ENGINE: WEIGHT 79 lbs. (35.83 kg)
Standard on QL units. [12"(305mm) x 10' (3.0m)]
ENGINE: TYPE Briggs & Stratton 4 Cycle IC Twin W/electric start
ENGINE: FUEL CAPACITY 8 qt.(7.5
Краткое содержание страницы № 2
IN THE INTEREST OF SAFETY BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & ENGINE MANUAL.” THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. The engine exhaust from this product contains chemicals known to the State of WARNING! California to cause cancer, birth defects or other reproductive harm. Other states may have similar laws. 13. DO NOT tamper with governor Federal laws apply
Краткое содержание страницы № 3
GENERAL SAFETY For your safety and the safety of others, these directions should be followed: Do not operate this machine without first reading ·DO NOT operate without discharging exhaust into enclosed owner's manual and engine manufacturer's manual. container. Use of Ear Protection is recommended while ·DO NOT operate during excessive vibration. operating this machine. ·DO NOT remove hose until engine has been turned off and has Use of Eye and Breathing protection is recom- come to a co
Краткое содержание страницы № 4
START STOP OFF ON PARTS BAG & LITERATURE ASSY P/N 790111 PARTS BAG ASSEMBLY CHECKLIST P/N 790229 Washer 5/16 Screw Cap 5/16-18 x 1 1/ Literature Checklist Nut Lock 1/4-20 68 52 Fender 59 2 8041030 Qty. 4 8160001 Qty. 3 8172020 Qty. 4 Check Owner's Owner's Manual Manual 790161 Nut Lock 5/16-18 60 8160002 Qty. 4 Screw Cap 1/4-20 x 1 1/2 85 8041008 Qty. 1 Check Literature Literature Parts Bag Parts Bag 790111 Washer 1/4 SAE 65 8181008 Qty. 2 Handle Adj. W/ Grip 811019 Qty. 1 45 Check Warr
Краткое содержание страницы № 5
OPERATION INTENDED USE: This machine is designed for vacuuming MOUNTING exhaust elbow leaves, grass clippings and other types of organic litter. Debris mixed with cans, bottles and small amounts of sand can INSTRUCTIONS: be vacuumed; however, it is not this machine's primary purpose. Vacuuming cans, bottles and sand will affect the 1) Remove the loose hardware from the clamp assembly so longevity of your machine. that there are 4 seperate pieces (remaining clamp assembly, Do not operate if exc
Краткое содержание страницы № 6
OPERATION continued STARTING INTAKE OPERATION: With machine running and fully assembled, move the nozzle in sweeping motions over debris. Always allow air to flow into the nozzle along with PUT OIL IN ENGINE BEFORE STARTING. the debris. Do not completely block the nozzle when vacuuming, it will reduce performance, and increase clog- ging (See figure 3). Inspect machine work area and machine before operat- ing. Make sure that all operators of this equipment are For removal of heavier debris,
Краткое содержание страницы № 7
OPERATION continued ADJUSTING HOSE BOOM: HANDLING & TRANSPORTING Properly adjusting the boom will prevent most hose clogs from The unit is equipped with small front wheels to allow for occurring and will maximize vacuum performance by keeping easier transportation to storage. With unit removed from its the hose straight and perpendicular to the housing (see fig. 5). mounting, tilt unit forward toward the ground and use wheels to manuever it into storage area. STORAGE Drain all fuel prior to sto
Краткое содержание страницы № 8
MAINTENANCE IMPELLER REMOVAL USE ONLY A QUALIFIED MECHANIC FOR ANY ADJUSTMENTS, DISASSEMBLY OR ANY KIND OF REPAIR. 1. Wait for engine to cool and disconnect spark plugs from the both sides of the engine. 2. Disconnect the negtive battery cable (black) (item 12) from the WARNING: TO AVOID PERSONAL INJURY, battery. ALWAYS TURN MACHINE OFF, MAKE SURE 3. Remove the hose coupler assy from the unit (item 36). ALL MOVING PARTS COME TO A COMPLETE 4. Remove the hose boom assembly. STOP. 5. Remove
Краткое содержание страницы № 9
MAINTENANCE continued Follow these hourly Maintenance Schedule INTERLOCK SYSTEM maintenance intervals. Every Every 5 Every Every Maintenance Operation Use hrs or 10 hrs 25 hrs Hose coupler assy (item no.36) must be installed, as shown in Fig. 8, to (Daily) operate the unit. When the switch is depressed one circuit is opened so Engine (See Engine Manual) engine is not grounded out and other circuit is closed to enable starter and fuel pump. Inspect battery for damage or leak Check battery term
Краткое содержание страницы № 10
PARTS DRAWING QL2000VE Part No. 790161 Page 10 of 12 Form No. F032399A
Краткое содержание страницы № 11
ITEM PART Parts List DESCRIPTION QTY NO. NO. 1 400268 LABEL HOT ENGINE 1 2 400339 KNOB 3 3 400424 LABEL OPEI WARNING 3 4 400502 WASHER LOCK 3/8 TWIST 5 5 400570 GRIP HANDLE 1" x 13" 1 6 500282 STRAIN RELIEF HEYCO 1244 1 * Denotes 7 790100 ENGINE 20 HP HORIZ. VANGUARD 1 standard 8 790129 LINE FUEL QL 1 hardware item 9 790130 CONTROL THROTTLE QL 1 that may be purchased 10 790131 CONTROL CABLE CHOKE 1 locally. 11 790132 CABLE BATTERY RED 26" 1 12 790133 CABLE BATTERY BLACK 10" 1 13 790134 CL
Краткое содержание страницы № 12
63 *8171003 WA SHER 5/16 FLA T CUT 22 64 *8171004 WA SHER FLA T 3/8 2 Parts List 65 *8172007 WA SHER 1/4 SA E 2 continued from 66 *8172008 WA SHER 5/16 SA E 2 page 11. 67 *9201125 KEY 1/4 x 2 3/4 1 * Denotes standard 68 *8172020 WA SHER 5/16 FENDER 4 hardware item that may 69 790163 DOOR FLA PPER INTA KE QL WA 1 be purchased locally. 70 790230 BRA CKET BA TTERY QL 1 71 790231 ROD BA TTERY HOLD DOWN 2 72 790232 LA BEL WA RNING SECURE 3 73 790125-S HOUSING A SSY QL (INCLUDES 18,49,50,72) 1 74 4302
