Руководство по эксплуатации Philips MCD709/12

Краткое содержание страницы № 1

2
User Manual
1
Quick Start Guide
MCD 709
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote control with two
Composite Video Cable
Control Cable
AAA batteries
Quick start guide
User manual
FM and MW antennas
MCD709 QUG_Eng-12 1 2006.6.8, 15:55

Краткое содержание страницы № 2

1 Connect the speaker and subwoofer cables. 2 Connect the MW and FM antennas. Tips – See the User Manual for other TV 3 connection options. Connect the control cable. –For connecting to a Progressive Scan TV, refer to the user manual for proper 4 connections and detailed setup. Connect the composite video to a TV. 5 Connect the power cords of the system and TV. AC power FM antenna MW antenna 5 4 Speaker Speaker (right) (left) Subwoofer 2 3 5 1 Setting up the TV 1 Press SOURCE (DISC on the remote

Краткое содержание страницы № 3

Setting the clock IMPORTANT! – To set clock in the Eco Power mode, press and hold ECO POWER/ STANDBY-ON 2 on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below. 1 In standby mode, press and hold CLOCK/RDS on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the hours. 3 Press CLOCK/RDS again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOLUME+/- o

Краткое содержание страницы № 4

Playing a disc 1 Press OPEN •CLOSEç (ç on the remote) to open the disc tray and load in a disc, then press the same button again to close the disc tray. 2 Load in a disc with the label side facing up. 3 Playback will start automatically. If not pressÉÅ. 4 To stop playback, press PRESET-/9 (9 on the remote). Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROG on the remote for more than two seconds to program all available stations in