Руководство по эксплуатации Harbor Freight Tools 66187

Краткое содержание страницы № 1

unpackIng
When unpacking, make sure that the item is
intact and undamaged. If any parts are missing or
broken, please call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
250 lb. Truck
ImporT anT saFeTY
InForma TIon
ladder rack
Installation precautions
1. Follow DOT regulations regarding installation
66187
and use.
2. Verify that installation surface has no hidden
utility lines before drilling or driving screws.
InsTrucTIons and
3. Install only according to these instructio

Краткое содержание страницы № 2

(passenger side bedrail) Front rack Installation InsT alla TIon InsTrucTIons note: The Front Rack is near the truck cab. read the enTIre ImporT anT saFeTY InForma TIon section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Park truck in level, stable location well away from traffic. Place transmission in park/neu- tral and set parking brake. blind Fastener (H) Installation Blind Fasteners will need to be installed

Краткое содержание страницы № 3

(Tailgate) rear rack Installation 6. Insert Arm (6) into Frame (1) and secure with Jam Bolt (D), as shown above. 1. Slide Rear Mounting Bracket (3) over Rear 7. Attach Ladder Stop (7) to Frame (1) using Base (5) as shown above. Temporarily se- Carriage Bolt (M), Washer (N), and Nylon cure in place with Jam Bolt (D). Insert Nut (P). 2. Place the Base/Bracket assembly as shown 8. Install Strap (8) through the bracket on the below at the passenger side of the vehicle Frame (1). near the tai

Краткое содержание страницы № 4

opera TIon 1. Measure the width of the ladder to be mount- ed on top of the Ladder Rack and slide the Arms (6) to fit the ladder allowing no more than 2” of space between ladder and Ladder Rack. Tighten the Jam Bolts (4) securely. 2. Lay the ladder on top of the Frames (1) between the vertical arms and slide it forward until it contacts the Ladder Stop (7). 3. Use the Straps (8) to wrap around ladder rungs and securely hold the ladder in place using hook and loop system attached to 6. I

Краткое содержание страницы № 5

parTs lIsT and dIagram part description Qty. part description Qty. A Installation Bolt M8 x 55 (tool) 1 1 Frame 2 B Flat Washer Ø8 (tool) 1 2 Front Mounting Bracket 1 C Installation Nut (tool) 1 3 Rear Mounting Bracket 1 D Jam Bolt 4 4 Front Base 1 E Hex Bolt M8 x 30 9 5 Rear Base 1 F Flat Washer Ø8 9 6 Arm 2 G Spring Washer Ø8 9 7 Ladder Stop 1 H Blind Fastener 9 8 Strap 2 J Screw M5 x 70 4 9 Cleat 2 K Flat Washer Ø5 4 note: Some parts are listed and shown for illustra- L Nylon Insert Nut M5 4

Краткое содержание страницы № 6

please read THe FolloWIng lImITed 90 da Y WarranTY careFull Y Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and The mAnuFAcTurer AnD/or DIsTrIBuT or durability standards, and warrants to the original HAS PROVIDED THE PARTS LIST AND purchaser that this product is free from defects in ASSEMBLy DIAGRAM IN THIS DOCUMENT AS materials and workmanship for the period of 90 A REFERENCE TOOL ONLy. NEITHER THE days from the date of purchase. This warra