Краткое содержание страницы № 1
PUSH– PAUSE SET
SPOT
CAMERA SELECT HDD STOP PLAY REC REC STOP
ALARM TIMER DST
MULTI
SETUP
/ESC
REMOTE
SUSPEND
OPERATE FULL
MULTISCREEN ALARM TIME&DATE
SEARCH
OSD SERCH
RESET LOCK SEQUECE SELECT
ALARM
ERROR
RECALL
ZOOM PLAY MODE SELECT
Digital Disk Recorder WJ-HD220
1 2 3 4
5 6 7 8
Digital Disk Recorder
Operating Instructions
Model No. WJ-HD220
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
FRANÇAIS ENGLISH
Краткое содержание страницы № 2
ENGLISH VERSION Caution: Before attempting to connect or operate this product, please read the label on the bottom. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. For U.S.A NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to The lightning flash with arrowhead symbol, Part 15 of
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarize
Краткое содержание страницы № 4
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................ 3 Lock/Unlock Buttons ...................................................... 54 PREFACE .......................................................................... 5 Password Verification ................................................. 54 FEATURES ........................................................................ 5 Enabling Button Lock ................................................. 54 PRECAUTIONS ..................
Краткое содержание страницы № 5
PREFACE The Digital Disk Recorder WJ-HD220 is designed for use playback, the WJ-HD220 features versatile interfaces with within a surveillance system and is a combination of a hard the network and RS485 communications. Interactive menus disk recorder and an 8-input video multiplexer. It records are provided for recording setup, alarm setup, network nearly 8 600 hours of picture and audio data selectively on setup, and so forth. a field basis with fine quality (FQ). Besides recording and FEATURES
Краткое содержание страницы № 6
PRECAUTIONS • Refer all work related to the installation of this product • We recommend that you note down your settings and to qualified service personnel or system installers. retain them. Power or battery failure may erase settings you entered. • Prevent condensation from forming on the surface of the hard disk. Wait until the dew evaporates in any of • Do not expose the appliance to water or moisture, nor the following cases. try to operate it in wet areas. The recorder is moved to a place s
Краткое содержание страницы № 7
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front View !7 @0 q w e t y i !0 !2 !3 !4 !8 !9 PUSH— PAUSE SET SPOT CAMERA SELECT ALARM TIMER DST MULTI HDD STOP PLAY REC REC STOP SETUP SUSPEND REMOTE 1 2 3 4 /ESC OPERATE FULL MULTISCREEN ALARM TIME&DATE RESET LOCK OSD SEQUENCE SELECT SERCH SEARCH ALARM ERROR 5 6 7 8 RECALL ZOOM PLAY MODE SELECT Digital Disk Recorder WJ-HD220 r u o !1 !5 !6@1 @2 @3 @4 @5 @6 @7 q Operate Indicator (OPERATE) i Daylight Saving Time (DST) Lights up when the power o
Краткое содержание страницы № 8
Orange: The input is not displayed on the monitor, but @0 Recording Stop Button (REC STOP) is recorded on the hard disk. Pressing the button for two seconds stops recording. Blink Yellow: The input channel has an activated alarm Recording in any mode is stopped exclusively with this and is in alarm recording mode. button. Blink Green: The input channel has an activated alarm but it is not recorded. @1 to @4 are playback mode selection (PLAY MODE SELECT) buttons. These buttons are used for passwo
Краткое содержание страницы № 9
While opening the time and date search window (TIME&DATE SEARCH): Pressing the JogDial moves the cursor to the next position in the window. Rotating the JogDial increases or decreases the parameter. After specifying the date and time, press the [PLAY] button to start playback. When operating alarm recall (ALARM RECALL): Holding down the JogDial for two seconds will open or close the alarm event log on the monitor. Rotating the JogDial will scroll up or down the log page. After selecting an alarm
Краткое содержание страницы № 10
Rear View #0 #2 #4 #6 #9 $0 $1 $2 $3 IN 8 7 6 5 4 3 2 1 POWER IN SPOT ON SIGNAL GND OUT ALARM/REMOTE OUT OFF OUT 8 7 6 5 4 3 2 1 MULTI AUDIO VIDEO RS-232C MODE 10/100BASE-T DATA SCREEN OUT #1 #3 #5 #7 #8 $4 #0 Audio Input Connector (AUDIO IN) #6 Alarm/Remote Port (ALARM/REMOTE) An RCA standard jack that accepts an unbalanced This port accepts the alarm inputs 1 - 8, and remote –10 dBV, 10 kΩ line input audio signal supplied from an controls while supplying status outputs. See ALARM/ external d
Краткое содержание страницы № 11
INSTALLATION Warning This installation should be made by qualified service personnel or system installers. Notes Places to avoid • Direct exposure to sunlight or near a source of heat such as a radiator. • Very dirty and dusty places. Places subject to strong vibrations. • Near a transformer, dimmer, video player, radio or monitor. These may cause humming noise, etc. About mounting • Do not block the ventilation openings or slots in the cover to prevent the appliance from overheating. • Alw
Краткое содержание страницы № 12
SER AVSD No. 6. Assemble the optional HDD unit onto the bracket using 7. Place the HDD unit on the chassis, and fix it with six the absorbers, sleeves, earth lug, and screws provided screws. with the recorder. 8. Reinstall the fan cord and connector. 9. Connect the power cable and flat cable on the rear of the HDD unit. 10. Fix the top cover to the recorder with nine screws. Mounting in the Rack 1. Remove the four rubber feet by removing the five 3. Install the unit with the rack mounting brac
Краткое содержание страницы № 13
CONNECTIONS & DIP SW SETTING System Composition & Connections Three system compositions are introduced depending on the camera type and other peripherals connected. Ordinary system-cameras are connected in combination with the multiscreen and spot monitors, microphone, and speakers. Microphone System Cameras System Cameras* Amplifier IN 8 7 6 5 4 3 2 1 POWER IN ON SPOT SIGNAL GND OUT ALARM/REMOTE OUT OFF OUT 8 7 6 5 4 3 2 1 MULTI AUDIO VIDEO RS-232C MODE 10/100BASE-T DATA SCREEN O
Краткое содержание страницы № 14
• Cameras equipped with data multiplex function are connected in combination with the system controllers and multiplex unit • compatible with PS Data. Note: Set DATA to ON in the CAMERA SYSTEM SETUP menu when connecting combination cameras to VIDEO IN 1-4. Combination Cameras Combination Cameras Pan/Tilt Table Receiver Microphone POWER ALARM ALARM SUSPEND ON OFF Amplifier Data Multiplex Unit WJ-MP204 Data Multiplex Unit RS485 Cable (WV-CA48) IN 8 7 6 5 4 3 2 1 POWER IN ON SPOT S
Краткое содержание страницы № 15
Personal computers can access the WJ-HD220 via the network. Combination Cameras Combination Cameras Pan/Tilt Table Receiver POWER ALARM SUSPEND ALARM ON OFF Data Multiplex Unit WJ-MP204 Data Multiplex Unit RS485 Cable (WV-CA48) IN 8 7 6 5 4 3 2 1 POWER IN SPOT ON SIGNAL GND OUT ALARM/REMOTE OUT OFF OUT 8 7 6 5 4 3 2 1 MULTI AUDIO VIDEO RS-232C MODE 10/100BASE-T DATA SCREEN OUT LAN Cable AC 120 V 60 Hz (10Base-T/100Base-TX Category 5) Hub/Router LAN/Internet PC (Internet Browse
Краткое содержание страницы № 16
Connection with the Camera Connection with the Monitors Site Connect the spot and multiscreen monitors. System Camera Connection Disk Recorder WJ-HD220 Connect system cameras to VIDEO IN 5-8. SPOT OUT MULTI SCREEN OUT IN 8 7 6 POWER POWER ON ON OFF OFF OUT 8 7 6 Spot Monitor Multiscreen Monitor Data-multiplex Camera Connection Connect combination cameras directly to VIDEO IN 1-4. ALARM/REMOTE Connection When connecting to VIDEO IN 5-8, use a Data Multiplex Unit as shown below. A 25-pin
Краткое содержание страницы № 17
Notes: • Input rating: Low-active, non-voltage normally open (N.O.) contact *1 • Output rating for pin #4 Alarm Recovery Out : High-active with a 200 Ω resistor pulled up to +5 V *2 • Output rating for pin #7 Alarm Out 2 : High-active with a 4.7 kΩ resistor pulled up to +12 V • Output rating for pin #6 Alarm Out 1: Low-active, maximum load capacity of +12 V 100 mA • Output rating for other pins: Low-active, maximum load capacity of 24 V 100 mA , open-collector with a 4.7 kΩ resistor pulled up to
Краткое содержание страницы № 18
4 3 2 1 Serial Port Connections RS-232C Connection A 9-pin connector is provided with the recorder to communicate with the PC via the RS-232C interface. WJ-HD200 PC DB9 DB9 1 1 2 2 3 3 4 4 5 Personal Computer 5 D-sub9 6 6 or 7 7 D-sub25 8 8 Frame Frame D-sub9 Shield IN 8 7 6 5 4 3 2 1 POWER WJ-HD200 PC IN SPOT ON SIGNAL GND OUT ALARM/REMOTE DB9 DB25 OUT OFF OUT 8 7 6 5 4 3 2 1 MULTI AUDIO VIDEO RS-232C MODE 10/100BASE-T DATA SCREEN OUT 2 (RXD) 2 (TXD) 3 (TXD) 3 (RXD) Digital Disk Recorder 4
Краткое содержание страницы № 19
4 4 3 3 2 2 1 1 Exclusively with System Controller RS-485 Cable System Controller IN 8 7 6 5 4 3 2 1 POWER IN SPOT ON SIGNAL GND OUT ALARM/REMOTE OUT OFF OUT 8 7 6 5 4 3 2 1 MULTI AUDIO VIDEO RS-232C MODE 10/100BASE-T DATA SCREEN OUT Disk Recorder DIP Switch System Controller Termination : ON (#5 : OFF, #6 : ON) ON 1 2 3 4 5 6 MODE With other system devices except System Controller RS-485 Cable RS-485 Cable Disk Recorder IN 8 7 6 5 4 3 2 1 POWER IN SPOT ON SIGNAL GND OUT ALARM/
Краткое содержание страницы № 20
Note: Use only the switch combinations shown in the table DIP Switch Setting above. The 6-bit DIP switch is used as follows. System Mode Setup Termination 1 Termination 2 ON 1 2 3 4 5 6 MODE #1 through #4: System mode setup #5 and #6: DATA port termination System Mode Switch Position Mode ON Normal operation mode 1 2 3 4 5 6 MODE ON Initializing HTML contents 1 2 3 4 5 6 MODE DATA Port Termination Termination switch positions depend on the system compo- sition. System Composition with: Switc
