Краткое содержание страницы № 1
Краткое содержание страницы № 2
WARNING: Dis-assembly and repair of this electronic unit should only be performed by authorized service personel. Any modification of the serial number or attempt to repair the original equipment or accessories by unauthorized individuals will void the warranty. handling and/or opening this unit may result in exposure to lead, in the form of solder. Warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects and other reproductive harm.
Краткое содержание страницы № 3
TABLE OF CONTENTS INSTALLATION PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PARTS SUPPLIED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INSTALLATION OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 2 ALTERNATIVE TRANSDUCERS AND MOUNTING METHODS . 4 TRANSDUCER EXCHANGE . . . . . . . . . . . . . . . . . . . . . . . . 5 USING THE 350TX . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 4
INSTALLATION PREPARATION PARTS SUPPLIED PARTS SUPPLIED Before installing your 350TX, please ensure the following parts are included in the box: • 350TX fishfinder • Transducer with 6m (20') of cable and mounting hardware kit • Mounting system and mounting hardware kit • 2m (6') power cable • Publications kit If any of these items is missing, contact your local Humminbird dealer. ACCESSORIES Humminbird offers a wide assortment of accessories that complement and expand the capability of your new 3
Краткое содержание страницы № 5
INSTALLATION PREPARATION INSTALLATION OVERVIEW display on the control head. It should be installed in contact with the surface of the water in an area that has smooth water flow - usually on the transom of the boat. There are several mounting options for the transducer. Review the following section to determine the method that works for you and your boat. Determining How to Mount the Transducer The 350TX includes a model XT-6-TB-90 transducer. This transducer can be mounted on the transom of the
Краткое содержание страницы № 6
INSTALLATION PREPARATION ALTERNATE TRANSDUCERS AND MOUNTING METHODS Inside the hull installations require no holes be drilled into the boat and through experimentation, high-speed operation comparable to transom mounting can be achieved. Two part, slow cure epoxy is required to glue the transducer in place. ALTERNATE TRANSDUCERS AND MOUNTING METHODS The 350TX comes with everything necessary for installation and operation on most boats. However, there are several situations which may require a di
Краткое содержание страницы № 7
INSTALLATION PREPARATION TRANSDUCER EXCHANGE Thru-hull mounting may require the use of a fairing block to level the transducer with the waterline. Also, since special tools and knowledge may be required to perform this type of installation it is best to refer to a qualified marine technician. TRANSDUCER EXCHANGE Other transducers are available as replacements for the standard transducer. You may exchange your new and unassembled transducer for another type. Contact your local distributor for det
Краткое содержание страницы № 8
USING THE 350TX HOW SONAR WORKS HOW SONAR WORKS Your Humminbird unit uses sonar to locate and define underwater objects, define the bottom terrain, as well as determine distance. Sonar technology is based on sound waves. Your Humminbird unit sends out a sound wave signal. With this signal it determines distance by measuring the time between the transmission of the sound wave and when the sound wave is reflected off an object. Your Humminbird uses the reflected signal to interpret location, size
Краткое содержание страницы № 9
USING THE 350TX SIMULATOR OPERATION Actual depth capability depends on factors such as bottom hardness, water conditions, and transducer installation. Units will typically read to deeper depths in fresh water than in salt water. SIMULATOR OPERATION The 350TX contains a simulator that allows you to use the unit as if you are on the water. The simulator is invaluable for learning how to operate the 350TX. There are two ways to start the simulator. If the unit is powered off, press and hold the PO
Краткое содержание страницы № 10
USING THE 350TX WHAT YOU SEE ON-SCREEN If you are using the 350TX in Simulator when no transducer is connected, any selected options are lost when the unit is powered off. The 350TX will return to Factory Settings, or options selected when last used with a transducer, if no transducer is connected. IMPORTANT: A transducer must be connected to the 350TX in order to retain user settings selected when in simulator mode. If no transducer is detected, the unit defaults to pre-selected options when po
Краткое содержание страницы № 11
USING THE 350TX WHAT YOU SEE ON-SCREEN Bottom Depiction Zero Line When in Auto mode, the horizontal line at the top of the screen is the “zero line,” representing the surface of the water. Occasionally there is a gap in this line. This gap indicates the unit is updating the display even if the bottom is not visible on- screen, or if the bottom information is not changing. New sonar information appears on the right side of the graphic area of the display and moves to the left as new information i
Краткое содержание страницы № 12
USING THE 350TX WHAT YOU SEE ON SCREEN Structure. Structure is defined as any object physically attached to the bottom. The sonar configuration of the 350TX is optimized to give the most accurate depiction of bottom structure possible. Grass, trees, stumps, wrecks or other debris are accurately displayed, however the depiction of these objects varies with boat speed and direction. The best way to learn to interpret structure is to operate the 350TX over a variety of known conditions and experime
Краткое содержание страницы № 13
USING THE 350TX CONTROL FUNCTIONS Fish in Left Beam that a small fish close to the boat does Fish in Right Beam not appear as a large fish symbol. + ID adds an additional piece of information to help the user locate fish. On selected fish symbols, the digital depth of the designated fish is drawn to help locate the fish vertically. This is especially helpful in setting bait depths or for downrigger operation. The specific fish symbol indicates the type of sonar beam the fish is detected in. This
Краткое содержание страницы № 14
USING THE 350TX CONTROL FUNCTIONS Power. The Power button powers the 350TX up for normal operation. When the unit is on, POWER turns the unit off. POWER can also be used to go directly into Simulator mode. To enter simulator, with the unit powered off, press and hold POWER for several seconds until a continuous chirp is heard. Light. LIGHT controls the unit’s display backlight. With the unit powered on, press LIGHT once to turn the backlight on “high.” Press LIGHT a second time to turn the back
Краткое содержание страницы № 15
USING THE 350TX CONTROL FUNCTIONS corresponding ARROW button has no function. Pressing that button will result in no adjustment and the “error” audible will be heard. A solid ARROW symbol means the corresponding ARROW button can be used to affect the menu adjustment. The ARROW buttons often can be used when no menu is on-screen. In these situations, pressing the ARROW button affects the function of the active (last-used) menu. This is a short- cut to menu operation. The menu appears on-screen wh
Краткое содержание страницы № 16
USING THE 350TX MENU FUNCTIONS Menu Functions Sensitivity. The Sensitivity function controls the sensitivity of the sonar receiver. The 350TX automatically adjusts the level of receiver sensitivity based on a number of factors including the depth of the water and the level of noise present. Noise can be caused by other electronic devices, engines, trolling motors, propeller cavitation and hydrodynamic flow among others. The user has the option of adjusting the Sensitivity higher or lower based o
Краткое содержание страницы № 17
USING THE 350TX MENU FUNCTIONS After an adjustment is made, the menu disappears and the new sensitivity setting is in affect. If additional time is needed to study a menu, press and hold the MENU button and the menu will remain on-screen indefinitely. If you need to make an additional adjustment, press the UP ARROW or DOWN ARROW button. Depth Range. The Depth Range function controls the vertical distance displayed on the graphic area of the display. There are nine depth ranges available. The top
Краткое содержание страницы № 18
USING THE 350TX MENU FUNCTIONS Using manual Depth Range control, you can view sonar information from the area near the surface in great detail. To return to automatic Depth Range control, press the MENU button until the Depth Range menu appears on-screen and use the UP ARROW to select AUTO. Zoom. Zoom is similar to Depth Range because it controls the range of information displayed on screen. Zoom, however, allows selection of ranges beneath the surface so any area of water between the surface an
Краткое содержание страницы № 19
USING THE 350TX MENU FUNCTIONS which the Zoom range is constantly adjusted to show the bottom, or manually, in which the user controls the location of the Zoom range. Automatic Zoom is especially helpful when looking for structure or bottom detail. The Automatic Zoom keeps the bottom in view even in quickly changing terrain, but is most useful in flatter areas without considerable depth variation. Manual Zoom provides detailed information of any area from the surface to the bottom. In manual Zoo
Краткое содержание страницы № 20
USING THE 350TX MENU FUNCTIONS Fish Alarm. The Fish Alarm alerts you to the presence of fish, or other targets not connected to the bottom. The Fish Alarm has three different settings that correspond to the three different size fish symbols shown on-screen. The default setting is “OFF.” With the “Large fish only” setting, the 350TX alarms on only those targets that are represented by the large fish symbols. The 350TX can be set to alarm on only large and medium fish, or set to alarm on all fish
