Краткое содержание страницы № 1
JE1908
19” HD FLAT PANEL LCD TV
OWNER'S MANUAL
Краткое содержание страницы № 2
SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER RISK OF ELECTRIC SHOCK DO NOT OPEN SERVICING TO QUALIFIED PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK RISQUE DE CHOC ÉLECTRIQUE NE AVIS PAS OUVRIR HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS * SEE REAR OF UNIT FOR GRAPHIC SYMBOLS * FILLED WITH LIQUIDS ON OR NEAR THIS UNIT. The lightning flash with an arrowhead within a t
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 13. Unplug this apparatus during lightning storms or when unused 2. Keep these instructions. for long periods of time. 3. Heed all warnings. 14. Refer all servicing to qualified 4. Follow all instructions. service personnel. Servicing is 5. Do not use this apparatus near water. required when the apparatus has 6. Clean only with a dry cloth. been damaged in any way, such 7. Do not block any ventilation as power-supply cord or plug is openi
Краткое содержание страницы № 4
TABLE OF CONTENTS SAFETY PRECAUTIONS ...................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ............................................................... 3 REMOTE CONTROL ........................................................................................... 5 ACCESSORIES ..................................................................................................... 5 REMOTE CONTROL REFERENCE GUIDE ......................
Краткое содержание страницы № 5
REMOTE CONTROL USING THE REMOTE CONTROL � Point the remote control at the REMOTE SENSOR located on the unit. � When using this unit in very bright light, the infrared REMOTE CONTROL SENSOR may not work properly. � The recommended effective distance for using the remote control is about 16 feet (5 meters). TO CHANGE THE REMOTE CONTROL BATTERY 1. Open the battery door. 2. Insert two “AAA” batteries. BATTERY REPLACEMENT When the batteries become weak, the operating dis
Краткое содержание страницы № 6
REMOTE CONTROL REFERENCE GUIDE 5) DISPLAY Button Press to show which input you are watching (TV channel / AV / YUV / PC). 6) CURSOR ( , , , ) Buttons Press to highlight selections on a menu screen and adjust certain settings. CH+/CH– Button Press CH+/CH– to change the TV channels. VOLUME (–/+) Buttons Press to adjust the volume level. 7) TV Button Press to select TV mode. 8) CC Button Press to activate the Closed Captioning feature. This function only works on programs broadcast with captions. 9
Краткое содержание страницы № 7
UNIT REFERENCE GUIDE 1) Color LCD Screen 2) STANDBY Indicator Indicates whether the unit is ON or in STANDBY (OFF) mode. Light On: The unit is in STANDBY. Light Off: The unit is turned ON. 1 REMOTE CONTROL SENSOR Do not block this sensor or remote 2 control will not work. 3) Removable Base Stand 4) STANDBY/ON Button 3 Turns the unit on and off. 5) MENU Button Enters and exits the TV menu. 6) FUNCTION Button Selects TV, AV IN, YUV IN or PC IN. 7) – VOL + Controls Adjusts the volume level and high
Краткое содержание страницы № 8
CONNECTIONS CONNECTING A TV ANTENNA/CABLE/SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Connecting a Digital Antenna The tuner in this TV receives ATSC TV signals from an antenna. This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts. Connecting an Analog Antenna or Device The tuner in this TV can receive NTSC TV sign
Краткое содержание страницы № 9
CONNECTIONS CONNECTING TO A/V DEVICES (VCR, PVR, Camcorder, Game System, etc.) Connecting to Devices with an S-Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit (Audio cable not included). Connect the S-VIDEO output from the VCR to the S-VIDEO input on this unit (S-VIDEO cable not included). Make sure you connect both audio and video from t
Краткое содержание страницы № 10
CONNECTIONS Connecting to Devices with a Composite (yellow RCA-type) Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit. Connect the video (yellow) output from the VCR to the video input on this unit. Make sure you connect both audio and video from the same VCR to the same input (AV IN). Note: Please refer to the user manual for the VCR for
Краткое содержание страницы № 11
CONNECTIONS Connecting to Devices with a Composite (yellow RCA-type) Video Input To connect to A/V devices such as a VCR, PVR or camcorder: - Connect to a VCR/PVR Connect the right (red) and left (white) audio input from the VCR/PVR to the right (red) and left (white) output on this unit. Connect the video (yellow) input from the VCR/PVR to the video output on this unit. Make sure you connect both audio and video from the same VCR/PVR to the same output (AV OUT). Note: Please refer to the user m
Краткое содержание страницы № 12
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on this unit (Component video cable not included). Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input on this unit (Audio cable not included). Make sure you connect both audio and video from the same
Краткое содержание страницы № 13
POWER SUPPLY USING THE CAR POWER ADAPTER The car power adapter allows the unit to be used with vehicles that have a 12V, negative ground electrical system. Cautions: � Use the provided car power adapter only. Use with other car power adapters could damage the unit. � The car power adapter included with this unit is for its use only. Do not use it with other equipment. � In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle. � Make sure the unit is sec
Краткое содержание страницы № 14
INSTALLATION REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. 1. Disconnect any cables or cords connected to the unit. 2. Lay the unit down on a flat surface, so the back side is facing up, making sure to place a
Краткое содержание страницы № 15
USING HEADPHONES • Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. � When headphones are connected, no sound will come from the front speakers. Note: � Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss. UNIT OPERATION TURNING THE UNIT ON FOR THE FIRST TIME The first time for you turning on the unit, the unit will enter Virgin mode. You can easily follow up promp
Краткое содержание страницы № 16
TV SETUP VIDEO MENU 1. Press the MENU button. 2. Press the ENTER or button to select Video. 3. Use the or button to select the options (Picture Mode, Brightness, Contrast, Saturation, or button (The screen Tint, Sharpness or Color Temperature). Adjust them using the will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN
Краткое содержание страницы № 17
TV SETUP VGA Settings in PC Mode Use the or button to select the options Video Auto Adjust H. Position 50 (Auto Adjust, H. Position, V. Position, Phase or Audio V. Position 50 Clock). Adjust them using the or button. The Phase 3 Setup screen will change to your desired setting. (Press Clock 127 Parental the ENTER or button to confirm Auto Adjust.) Best definition 1440 x 900 - Resolution : 1,440 x 900 max - Refresh Frequency : 60Hz max VGA Enter ENTER Select EXIT Return � H. Position : Cente
Краткое содержание страницы № 18
TV SETUP TV MENU (For TV Mode Only) Video Tuner Mode Cable 1. Press the MENU button. Auto Scan 2. Use the or button to select TV. Press the Audio Auto Scan Add CH ENTER or button to go into the TV settings. Channel Skip TV MTS Stereo 3. Use the or button to select the options Setup Audio Language English (Tuner Mode, Auto Scan, Auto Scan Add CH, Parental Channel Skip, MTS or Audio Language). Adjust them using the or button (The screen will change to your desired setting); or press the Pare
Краткое содержание страницы № 19
TV SETUP TV MODE AV / YUV MODE Video OSD Language English Video OSD Language English Time Setup Time Setup Audio Audio Caption Caption Restore setting Restore setting Setup TV Setup Parental Parental Setup Select EXIT Exit Setup Select EXIT Exit PC MODE Video OSD Language English � OSD Language :Select from English / Time Setup Español / Français. Audio Restore setting Setup Parental Setup Select EXIT Exit Time Setup Setting Video Time Update Off Video Time Zone EasternTime Time Date 2000/01/01
Краткое содержание страницы № 20
TV SETUP Caption Setting Video Analog Closed Caption Video Caption Style As Broadcaster Off Digital Closed Caption Off Font Size Small Audio Audio Digital Caption Style Font Style Style 1 Font Color Green TV TV Font Opacity Solid Setup Setup Background Color Black Background Opacity Translucent Parental Parental Window Color White Window Opacity Transparent Caption Digital Caption Style Select EXIT Return Select EXIT Return � Analog Closed Caption : Select the analog closed caption or turn it of
