Краткое содержание страницы № 1
7" Portable On-camera LCD Monitor
User Manual
Model: HDSDI&HDMI, Waveform, Audio meter, Focus assist
DT-X71F
HDSDI&HDMI
DT-X71H
HDMI
DT-X71C
Please read this User Manual
throughout before using.
Краткое содержание страницы № 2
Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 ． All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 ． All brands and trademarks are protected and other relative trademarks in this user manual are the properties of their respective owners. 3 ． Due to constant effort of product development, Swit Electronics reserve
Краткое содержание страницы № 3
Maintenance Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4. Please don't press the screen; the LCD is
Краткое содержание страницы № 4
1. Features DT-X71F ◆ New high resolution 7 ” LCD Panel ◆ Peaking focus assist (red/blue switch) 16:9, 1024×600, 16.77 million colors, 900:1 The Peaking focus assist function is to mark the contrast, and H160 °/ V160 °viewing angle. sharpest edges of the image with red or blue color, ◆ Multiple inputs for users to check if the subjects are focused. 2 HD/SD-SDI, 1 HDMI and 1 Composite input. ◆ Zebra stripes ◆ Loop through outputs Zebra Stripes are used to check if the image is Each of t
Краткое содержание страницы № 5
DT-X71H ◆ New high resolution 7 ” LCD Panel 16:9, 1024×600, 16.77 million colors, 900:1 ◆ User definable function keys contrast, and H160 °/ V160 °viewing angle. There are 2 function keys on the monitor front ◆ Multiple inputs panel, that permit users to define shortcuts for the 2 HD/SD-SDI, 1 HDMI, 1 Composite input various functions. and L/R stereo audio. ◆ User editable video title ◆ Loop through outputs User can edit a video title for the current camera, 1 HD/SD-SDI loop through o
Краткое содержание страницы № 6
DT-X71F Front view ⑴ PHONE: Earphone jack ⑵ POWER: Power on/off Connect with power cable or mount battery, press the “POWER” and the power indicator is turned on and after 10 seconds, the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off. Disconnect with power cable or take off the battery if the monitor will not be used for a period of time. ⑶ IN: Input signal selec
Краткое содержание страницы № 7
Rear view ⑴ DC 12V IN: Connect with DC12V 4-pin XLR power adapter. ⑵ TALLY Light: Red, Green and Yellow 3-color TALLY indicator ⑶ Battery mount: Connect with JVC battery BN-VF823 or SWIT battery BN-S8823 to power the monitor. ⑷ HDSDI IN1/2: HD/SD-SDI input (BNC connector) ⑸ HDSDI OUT: HD/SD-SDI loop through output (BNC connector) ⑹ HDSDI LOOP1/2: HD/SD-SDI loop through output (BNC connector) ⑺ VIDEO IN: Composite video input (BNC connector) ⑻ TALLY contro
Краткое содержание страницы № 8
DT-X71H Front view ⑴ PHONE: Earphone jack ⑵ POWER: Power on/off Connect with power cable or mount battery, press the “POWER” and the power indicator is turned on and after 10 seconds, the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off. Remark: Disconnect with power cable or take off the battery if the monitor will not be used for a period of time. ⑶ VIDEO:
Краткое содержание страницы № 9
Rear view ⑴ DC 12V IN: Connect with DC12V 4-pin XLR power adapter. ⑵ TALLY Light: Red, Green and Yellow 3-color TALLY indicator ⑶ Battery mount: Connect with JVC battery BN-VF823 or SWIT battery BN-S8823 to power the monitor. ⑷ HDSDI IN1/2: HD/SD-SDI input (BNC connector) ⑸ HDSDI OUT: HD/SD-SDI loop through output (BNC connector) ⑹ VIDEO IN: Composite video input (BNC connector) ⑺ AUDIO L/R: Stereo audio L/R input (RCA connector) ⑻ TALLY controlling po
Краткое содержание страницы № 10
DT-X71C Front view ⑴ PHONE: Earphone jack ⑵ POWER: Power on/off Connect with power cable or mount battery, press the “POWER” and the power indicator is turned on and after 10 seconds, the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off. Remark: Disconnect with power cable or take off the battery if the monitor will not be used for a period of time. ⑶ VIDE
Краткое содержание страницы № 11
Rear view ⑴ DC 12V IN: Connect with DC12V 4-pin XLR power adapter. ⑵ Battery mount: Connect with JVC battery BN-VF823 or SWIT battery BN-S8823 to power the monitor. ⑶ VIDEO OUT: Composite video loop through output (BNC connector) ⑷ AUDIO L/R: Stereo audio L/R input (RCA connector) ⑸ VIDEO IN: Composite video input (BNC connector) ⑹ HDMI: HDMI input ⑺ TALLY controlling port ⑻ TALLY Light: Red, Green and Yellow 3-color TALLY indicator Input form
Краткое содержание страницы № 12
3. Menu Operation Press “MENU” and it will display menu system Revolve “OK” to select an item. The selected item will be highlighted display. Press “OK” to enter the selected item. Under menu system, press “MENU” to back to previous menu. The menu will automatically save and quit if it remains idle. 4. Picture Settings Submenu The Picture Settings Submenu includes: ⑴ CONTRAST: 0-100 value adjustment ⑵ BRIGHTNESS: 0-100 value adjustment ⑶ HUE: 0-100 value adjustment (
Краткое содержание страницы № 13
6. OSD Settings Submenu The OSD Settings Submenu includes: ⑴ LANGUAGE: Menu language English / Chinese selection ⑵ H-POSITION: Menu horizontal position (0-100) adjustment, real-time preview, default value: 50, center. ⑶ V-POSITION: Menu vertical position (0-100) adjustment, real-time preview, default value: 50, center. ⑷ DURATION: Menu timeout setting Set a time (in seconds) in which the menu will automatically quit if remains idle. Default: 10 seconds; Range: 5 seconds to 60 seconds.
Краткое содержание страницы № 14
9. FUNCTION KEY Settings Submenu The F KEY Settings Submenu is to define Function Keys on the front keyboard. The DT-X71F has 3 function keys: F1, F2 and F3; The DT-X71H and DT-X71C has 2 function keys: F1 and F2. The available function items of each model are: -------------------DT-X71F------------------- -------------------DT-X71H------------------- 01-RATIO: Aspect ratio switch 01-RATIO: Aspect ratio switch 02-SCAN: Underscan / Overscan switch 02-SCAN: Underscan / Overscan
Краткое содержание страницы № 15
11. Specifications LCD Performance Size 7.0 inches Resolution 1024 ×RGB ×600 Aspect ratio 16:9/4:3 Color system NTSC/PAL 2 Brightness 400cd/m Contrast 900:1 Color 16.77 million colors Viewing angle H/V:160/160 Video Format 1080i (60 / 59.94 / 50) SMPTE-274M 1080p (30 / 29.97 / 25 / 24 / 23.98) SDI * SMPTE-296M 720p (60 / 59.94 / 50) SMPTE-125M 480i (59.94) ITU-R BT.656 576i (50) 480I / 576I / 480P / 576P 1080i (60 / 59.94 / 50) HDMI 720p (60 / 59.94 / 50) 1080p (60 / 59.94
Краткое содержание страницы № 16
This model is manufactured, warranted and supported by SWIT Electronics Co., Ltd. / SWIT Electronics USA, LLC, and distributed in North America by JVC Professional Video Products. To obtain service or for further information, please contact: SWIT Electronics USA, LLC. Address: 4300 Stevens Creek Blvd., Suite 230, San Jose, CA 95129 Toll free: 1 866 986-SWIT (7948) • Tel: 408 260-8258 ·Fax: 408 228-8438 Ema
