Краткое содержание страницы № 1
Remote Vehicle Control System
SRT 1600
Owner's Manual
Deluxe Vehicle Security and Keyless
Entry System with 900Mhz Two Way
Confirming LCD Remote Control
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this
manual is applicable to most vehicles. However, due to the configuration of some vehicles, some
functions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more
information.
1
Краткое содержание страницы № 2
Table of Contents Using Your Remote Control ................................................................................................................ 3 Arming the security system Pre-arm mode Disarming the security system Disabling/Enabling confirmation chirps Attempted intrusion identification Two stage door unlock* Activating the trunk release feature* Using Your Remote Control, continued ....................................................................................... 4 Turning o
Краткое содержание страницы № 3
Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the LOCK button on the remote control. The system will sound 2 times and the parking lights will flash 2 times, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature. The status indicator (blue warning light on the dash) will blink steadily, once per second. To arm the system silently, press and hold the LOC
Краткое содержание страницы № 4
Using Your Remote Control, continued Turning on the Vehicle’s Headlights (Optional) If this feature is enabled on your system, pressing and holding the LOCK button on the remote control for 3 seconds will turn on the vehicle’s headlights for 30 seconds. Activating Optional AUX 1 (Optional) If this feature is enabled on your system, press and release the OPT button on the remote control to activate an optional feature. This feature can be programmed for a wide range of functions like power wi
Краткое содержание страницы № 5
Additional LCD Remote Control Functions LCD Remote Control Display Illumination Press and release the “F” button on the LCD remote control one time. The display will illuminate for 10 seconds. LCD Remote Control Vibrate or Tones Press and release the “F” button and the UNLOCK button on the LCD remote control simultaneously one time to toggle between beep tones and vibrate mode. The LCD remote control will either beep or vibrate to indicate which mode is selected. Page Call Out From with
Краткое содержание страницы № 6
Additional LCD Remote Control Functions, cont. Check Vehicle Status Press the LOCK, TRUNK and KEY buttons simultaneously for 1 second. The LCD remote control will display the system’s current status. Check Temperature Press the TRUNK and KEY buttons simultaneously for 1 second. The LCD remote control will display the vehicle’s interior temperature. Battery Save Mode Press the LOCK and “F” buttons simultaneously when the system is disarmed. Note that in this mode the remote will not send
Краткое содержание страницы № 7
Quick Reference Button Operation Guide. Operation Function Lock Unlock Trunk KEY OPT F Operation Method Lock X Press and Release Unlock X Press and Release Headlight X Press and Hold for 3 seconds Trunk X Press and Hold for 2 seconds Car Finder X X Press and Release Panic X X Press and Hold for 2 seconds Remote Start X Press two times in 2 seconds Temp Start X X Press and Release Daily Start X X Press and Release AUX1 X Press and Release AUX2 X Press and Hold for 2 seconds AUX3 X X Press and Hol
Краткое содержание страницы № 8
LCD Screen Icons and their Indications TRANSMITTING BATTERY INDICATOR VALET MODE IN-RANGE INDICATOR P. LIGHT FLASH SHOCK TRIGGER HOOD LOCKED/ARMED UNLOCKED/DISARMED SILENT ARM/DISARM DAILY START DOOR TRIGGER TIMER MODE TEMPERATURE START MODE ALARM CLOCK MODE IGNITION TRIGGER TRUNK COUNT DOWN TIMER MODE ENGINE RUNNING CALL PAGE FROM VEHICLE VIBRATE/SILENT MODE NO START BATTERY SAVE MODE REMOTE START INHIBIT CLOCK / TIMER / TEMP. DISPLAY 8
Краткое содержание страницы № 9
Emergency Override Procedure If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the security system off. There are two types of emergency override procedures. Check with your installing dealer to find out what has been activated on your system. Standard Emergency Override Procedure 1. Enter the vehicle (the security system will trigger). 2. Turn the ignition key to the ON position. 3. Press and release the emergency override button (The
Краткое содержание страницы № 10
10
Краткое содержание страницы № 11
Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts dir
Краткое содержание страницы № 12
Code Systems, Inc. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation. Warning! Changes or modifications not expressly approved by the party responsible for compliance coul
