Руководство по эксплуатации Garmin VIB10

Краткое содержание страницы № 1

Caution: The VIB speaker outputs are differential. Connect the VIB speaker
VIB 10/11 I tIallanston G Iu de
outputs directly to the vehicle’s speakers or to a high-level audio input on an
amplifier. Audible pops may be heard if the VIB is not installed correctly.
Warning
Failure to avoid the following potentially • You assume all responsibility and risk for any notE: The tan “Output Level” wire (pin 9) limits the volume of the navigation
hazardous situations could result in an accident

Краткое содержание страницы № 2

Warning Failure to avoid the following potentially hazardous situations could result in an accident • Make sure to ground the VIB to the chassis of the vehicle. or collision resulting in death or serious injury. • Secure all wiring with cable clamps or electrical tape. Insulate unconnected wires; do not allow any bare wiring to remain exposed. • Do not open the VIB or loosen the case screws. Doing so will void the warranty. • Do not let unconnected wires or terminals touch metal on the vehic