Краткое содержание страницы № 1
System User’s Manual
BHS-4000A
Краткое содержание страницы № 2
Consumer Information FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, the
Краткое содержание страницы № 3
Industry Canada NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements documents. The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the f
Краткое содержание страницы № 4
Table of Contents Consumer Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii . FCC Notice .................................................................................................. ii Industry Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Welcome . . . . . . . . . . . . .
Краткое содержание страницы № 5
System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 . Bypass a Zone ..................................................................................... 21 Turn the Door Chime On or Off ..................................................................... 22 View Alarm Memory ............................................................................... 22 Create an Additional Keypad Code ....................................
Краткое содержание страницы № 6
Questions and Answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 . General Use of the System ......................................................................... 41 Security Passwords and Keypad Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Alarms and Emergencies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 7
Welcome Thank you for choosing an ADT security system. We appreciate your business. To get the most from the easy-to-use ADT security system, please take the time to read this manual. It describes the components of the system and tells you how to use the keypad. It also tells you what to do in the event of an alarm. Please also be sure to read your Customer Emergency Information Schedule so that you will have a clear understanding of ADT procedures should you experience an alarm event. Imp
Краткое содержание страницы № 8
How to Avoid False Alarms Numerous false alarms can affect the quality of your monitoring service. They can also result in fines from your local municipality. To avoid false alarms, follow these simple tips: 1. Be sure that everyone in your protected location knows how to use the alarm system. Everyone should know a Security Password (formerly known as a Master Code Word or Personal Identification Code [PIC]), as well as a keypad code. 2. If you cause an alarm accidentally, cancel i
Краткое содержание страницы № 9
The ADT Home Security System Standard Equipment The master control panel is housed in a metal box. It is typically mounted in an out-of-the-way location, such as a closet. The master control panel processes the information sent to it by the system’s sensors and keypad. It also contains a battery that allows the system to operate during a power failure. When an alarm occurs, the master control panel sends a message over the telephone line to an ADT Customer Monitoring Center. Do not open th
Краткое содержание страницы № 10
Standard Equipment, cont’d. A motion detector is mounted on the wall inside your home. This sensor can detect when there is movement within its field of view. If the system is on when this happens, an alarm signal goes to an ADT Customer Monitoring Center. Motion Detector The siren is a small plastic box mounted inside your home. When an alarm occurs, the siren sounds a warning designed to frighten off intruders. The siren may also sound when you use some of the system’s special features
Краткое содержание страницы № 11
Optional Equipment This device detects both smoke and dangerously high temperatures. It is mounted in a central location of the house on the ceiling. Smoke/heat detectors are not available for commercial installations. Smoke/Heat Detector The heat sensor detects when the temperature nearby is dangerously high. It is mounted in a central location of the house on the ceiling. Heat sensors are not available for commercial installations. Heat Sensor This small detector is mounted near any l
Краткое содержание страницы № 12
Optional Equipment, cont’d. This device detects carbon monoxide, an odorless, poisonous gas. Improperly maintained appliances such as hot water heaters can produce carbon monoxide. Carbon Monoxide Detector Optional Features The optional Pager/Latchkey feature notifies you that your children have arrived home safely when you are away. When your child turns the system on or off, you receive a page on your pager. You can also receive pages for other system events, like alarms or pager/latchkey
Краткое содержание страницы № 13
The Parts of the Keypad 7 Standard Keypad POP-UP ZONE CARD READY light Lights when the system STATUS DISPLAY is ready to turn on ON light Lights when the system is on ON key Turns the system on EMERGENCY FIRE key Press in case of fire Call 911 first, if possible MOTION OFF key Turns off motion detectors EMERGENCY MEDICAL key so you can remain at home Press in case of a medical emergency and keep the system armed Call 911 first, if possible INSTANT key EMERGENCY POLICE key Instructs system t
Краткое содержание страницы № 14
The Parts of the Keypad, cont’d. 8 Premium Keypad POP-UP ZONE CARD MESSAGE WINDOW ON light Lights when the system is on ON key Turns the system on EMERGENCY FIRE key MOTION OFF key Press in case of fire Turns off motion detectors Call 911 first, if possible so you can remain at home and keep the system armed EMERGENCY MEDICAL key Press in case of a medical emergency Call 911 first, if possible INSTANT key Instructs system to sound an alarm when a EMERGENCY POLICE key protected door is open
Краткое содержание страницы № 15
The Parts of the Keypad, cont’d. Status Display (Standard Keypad) The following diagram illustrates the functions of each of the keypad’s lights: Indicates either Indicates either Indicates either Zone Zone 1 status or Zone 2 status or 3 status or one or the system is in the system is in more zones have Instant mode Motion Off mode been bypassed Indicates either Zone 4 status or it Lights when the is time to enter a system is on keypad code Indicates either Zone 8 status or it is time
Краткое содержание страницы № 16
Emergency Keys If you are home when a police, medical or fire emergency arises, you can alert an ADT Customer Monitoring Center of your situation with the single press of an emergency key. The system does not need to be on. (Not all emergency buttons are available to all commercial customers.) Call 911 First If your community provides 911 emergency service and you are able to reach a telephone during the emergency, ADT recommends that you call 911 before pressing the emergency key. This giv
Краткое содержание страницы № 17
Using the Keypad The ADT security system in your home may have a Standard keypad or a Premium keypad. Both types of keypads can be used to turn the system on or off, or to test or customize it. For some procedures, the keypads’ commands are slightly different. In those cases, this manual contains two sets of instructions, like those shown below. If you are using a Standard keypad, follow the instructions on the left. If you are using a Premium keypad, follow the instructions on the right. I
Краткое содержание страницы № 18
Keypad Codes When the system is installed, you select a three- or four-digit code number that you will use to arm and disarm the system. This is your keypad code. You can also create a separate keypad code for anyone who needs access to your home (see page 23 for more information). You can change your keypad code and add or delete additional codes whenever you like, using the keypad. If you have questions about programming, using or changing your keypad code, you can contact ADT’s Custome
Краткое содержание страницы № 19
Turning the System On The Four “On” Modes You can arm the ADT security system using four different modes: 1. Normal mode 2. Motion Off mode 3. Motion Off/Instant mode 4. Instant mode The illustration below helps you choose which mode to use. NORMAL MODE Everyone is leaving Press the the house ON key MOTION-OFF MODE If Someone might walk in front of the motion detector Press the ON and MOTION OFF And keys Someone might open a protected door MOTION-OFF/ INSTANT MODE If Someone mi
Краткое содержание страницы № 20
Turning the System On in Normal Mode 1. Close all of the doors and windows, and make sure that the message window reads READY or the READY light is lit (if not, see page 16). 2. Press the ON key. The ON light begins to blink, telling you that the system is on and that the exit delay has begun. The Premium keypad displays the number of seconds left in the exit delay. 3. Exit promptly. You must leave the building before the delay ends. See page 12 to reference the exit delay time
