Краткое содержание страницы № 1
SSA-S1000
Standalone RFID
Access Controller
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please visit our website.
www.samsungsecurity.com
Краткое содержание страницы № 2
safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accom
Краткое содержание страницы № 3
SAFETY INFORMATION PRODUCT INTRODUCTION 5. Keep out of direct sunlight and heat radiation sources. It may cause fi re. 6. Install it in a place with good ventilation. 7. Avoid aiming the controller directly towards extremely bright objects such as sun. 8. Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus. 9. The Mains plug is used as a disconnect device and shall stay readily operable at any time. FCC State
Краткое содержание страницы № 4
contents 5 Feature PRODUCT INTRODUCTION 6 What’s included 7 At a Glance 8 Cable Color Scheme 5 8 Cable Selection 9 Installation INSTALLATION AND EXTERNAL 9 Bypass Diode Connection CONNECTION 10 I/O Connection 9 12 Initializing the system by short-circuiting SYSTEM INITIALIZATION & BASIC 12 Basic Operations OPERATIONS 13 To register /delete Master ID 13 To register/delete ID card 12 15 Product Specifi cations PRODUCT SPECIFICATIONS 15
Краткое содержание страницы № 5
PRODUCT INTRODUCTION product introduction FEATURE This product is designed for use with one-door access control for security applications. With its compact design, you can install this product on the wall or a doorframe; Its epoxy molding guarantees stable operation in a challenging environment. This product enables you to control the door using the user card and provides a simple method to register or delete cards, and initialize the system, which is, one of the most convenient and safest do
Краткое содержание страницы № 6
product introduction WHAT’S INCLUDED Check if the following items are included in the product package. Master Card (x1) Main Module Bezel Keytag (x5) 3.5 x 40mm Screws (x2) Diode (X 2) 3.5 x 25mm Screws (x2) (UF4004, 1N4001~4007) 6 x 30mm Plastic Anchors (x2) CD Manual 6_ Product Introduction
Краткое содержание страницы № 7
PRODUCT INTRODUCTION AT A GLANCE Front/Rear 3 4 5 1 LED Displays the system operation status using red and green indicators. 2 Fixing Hole Fixing hole for wall-mounting. 3 Connection Cable Used to connect to the power or I/O cable. Program Port Port used to upgrade the fi rmware. 4 Buzzer Piezo buzzer. 5 English7
Краткое содержание страницы № 8
product introduction CABLE COLOR SCHEME Item Cable Color Signal Line Description Red DC+12V +12V supplied Power Black GND Earth-Grounding for Power Yellow AUX INPUT#1 Select a Lock Type Input Blue Door Contact Sensor Door Sensor Connection Port Green Exit Button Exit Button Connection Port Alarm Device Connection Purple Alarm Out Port Output Door Lock device connection White Door Lock Out port Gray Orange Not used Brown CABLE SELECTION Item Cable Type Power (DC +12V) Belden #9409, 18 AWG 2
Краткое содержание страницы № 9
INSTALLATION AND EXTERNAL CONNECTION installation and external connection INSTALLATION 6-32 hole 6-32 or M3 Screws 1/2” hole 6-32 hole Reader Module - On a doorframe or the wall 1. Drill a 1/2-inch (12.7 mm) hole onto the center of the doorframe or the wall where SSA-S1000 is installed, which makes room for the cable of the reader module. 2. Drill two 0.3-inch (7.62 mm) holes: one on the point of 0.39 inch (10 mm) horizontally to the right, 1.74 inch (44.4 mm) vertically up from the center
Краткое содержание страницы № 10
PUSH installation and external connection I/O CONNECTION Input Connection DOOR CONTACT (blue) Door Contact Sensor EXIT BUTTON Exit Button (green) DC +12V GND GND (black) DC +12V (red) DC 12V(+) POWER - To connect the power supply unit 1. Connect the DC+12V to the red line. 2. Connect GND to the black line. - To connect the Door Contact Sensor 1. Connect the COM port of the sensor to the blue line. 2. Connect the NO port of the sensor with the GND line. - To connect the Exit Button 1. Connect o
Краткое содержание страницы № 11
INSTALLATION AND EXTERNAL CONNECTION Output Connection DOOR LOCK OUT (white) Door Lock ALARM OUT (purple) Alarm Device Lock Type Select (yellow) Cathode Anode 1N4004 ~ 1N4007 or equiv. DC +12V GND DC 12V(+) POWER - To connect the power supply unit 1. Connect the DC+12V to the red line. 2. Connect GND to the black line. - To connect the door lock device 1. Connect the plus(+) line of the lock device to DC+12V. 2. Connect the minus(-) line of the lock device to the white line. - To connect the a
Краткое содержание страницы № 12
system initialization & basic operations INITIALIZING THE SYSTEM BY SHORT-CIRCUITING Short-Circuit 1. Turn off the product and short-circuit three lines: white line of the door lock device, green line of the Exit button, and yellow line of the lock type. White Door Lock 2. When you turn the product back on, all of the LED indicators Green turn red or green, repeat turning on/off twice before being Exit Button completely turned off. Yellow Lock Type 3. In the power-off condition, all LED ind
Краткое содержание страницы № 13
SYSTEM INITIALIZATION & BASIC OPERATIONS TO REGISTER /DELETE MASTER ID SSA-S1000 1. First turn off the product, and short-circuit two lines: purple line of Cable Alarm Out and blue line of the Door Contact Sensor. Blue 2. When you turn the product back on, you will hear the beep twice while Yellow all of the LED indicators turn red, and repeat turning on/off twice before Green being completely ON; then the Master card will be deleted. Purple Short-Circuit White 3. Upon deletion of the Master
Краткое содержание страницы № 14
troubleshooting TROUBLESHOOTING If the product does not function properly, please see the below for trouble shooting. If the trouble persists, please contact the SAMSUNG Customer Service near you. PROBLEM SOLUTION The user card is not deleted. 1) Check if the product works properly. - If the product works properly and you have the Master Card Read the Master Card. Read the card to delete. Read the Master Card again to switch to normal mode. For more inf
Краткое содержание страницы № 15
PRODUCT SPECIFICATION product specifi cations PRODUCT SPECIFICATIONS Item SSA-S1000 Users 512 Users Power / Current DC 12V / Max.110mA Reading Time (Card) 30ms Door Open Time 5sec. (Fixed) Input Port 3ea: Exit Button, Door Sensor, Lock Type Select [Power fail Safe / Power Fail Secure] 2ea : TR Output / DC 12V. Rating Max. 300mA Alarm Output, DC 12V. Rating Max. Output Port 1A Lock Output LED Indicator 9 LED Indicators (Red and Green) Beeper Piezo Buzzer Operating Temperature -20°C to +50°C
Краткое содержание страницы № 16
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste dispos
