Краткое содержание страницы № 9
EN Contents 22 Important information 25 Assistance 22 Technical specifications 26 Warranty 22 Maintenance 23 Environmental information 23 Factory initialization mode 24 Compliance information 24 Radio Interference 25 FCC RF Radiation Exposure Statement Preparing your baby monitor Baby unit The baby unit can be operated by power supply or batteries. When batteries are inserted, you will have an automatic back-up in case of power supply failure. Cord operated use 1 Connect the power adapter cord (
Краткое содержание страницы № 10
EN Preparing your baby monitor 3 Put the battery compartment cover (A-12) back in place. Close the compartment by turning the cover (A-12) to the right (CLOSE B), using the palm of your hand. Note:When the units are switched off, in case of battery operated use, the batteries will still discharge slowly. ➜The baby unit is now ready for battery operateduse! Parent unit 1 Open the battery compartment by sliding the cover (B-12) downwards. + ++ ++ + 2 Insert the two 1.2V AAA size NiMH rechargeable
Краткое содержание страницы № 11
EN Preparing your baby monitor Notes: – Operation time will be 8 hours based on the assumption that the baby unit will be transmitting 25% of the time and is in standby mode for the rest of the time (baby does not any make sound). –When the parent unit batteries are charged for the first time, operating time will be less than 8 hours.The batteries will use their maximum capacity after at least four times charging and discharging. – Charging will take longer than 16 hours when the parent unit is
Краткое содержание страницы № 12
EN Using your baby monitor 4 Position the baby unit at least 1 meter / 3 feet away from your baby. > 1m / 3 ft 5 Position the parent unit at the desired place within the operating range of the baby unit but at least 1 meter / 3 feet away from the baby unit. For more information on the operating range see ‘Technical specifications’. ➜You can now monitor your baby! Other features Adjusting loudspeaker volume • Briefly press the volume + and – buttons (A-4) on the baby unit repeatedly until the des
Краткое содержание страницы № 13
EN Other features Talking to your baby (Talk function) While using the TALK button (B-1) on the parent unit you can talk to your baby (e.g to comfort your baby). • Press and hold the TALK button (B-1) and talk clearly into the microphone (B-5). • Release the TALK button (B-1) when finished talking. Note:When the TALK button (B-1) is pressed, you can no longer hear your baby. Monitoring baby silently • Briefly press the Volume – button (B-10) on the parent unit repeatedly until the volume is swit
Краткое содержание страницы № 14
EN Other features Paging the parent unit When the parent unit is misplaced and the volume is switched off, you can use the PAGE button (A-5) on the baby unit to locate the parent unit. 1 Briefly press the PAGE button (A-5) on the baby unit > H appears on both displays (A-11, B-8). > The parent unit will automatically reset to medium volume level and a paging alert will sound. 2 To stop the paging alert, press the PAGE button (A-5) again briefly or any button on the parent unit Note: If you press
Краткое содержание страницы № 15
EN Other features Connecting / disconnecting belt clip and neck strap If the parent unit is operated using batteries, you can carry it in and around your house, allowing you freedom of movement while still monitoring your baby. Connecting the belt clip • Insert the little spindle on the rear of the belt clip into the recess (B-11) on the rear of the parent unit. Twist the belt clip to the left until it clicks in position. Disconnecting the belt clip • Turn the belt clip to the right (TURN B) and
Краткое содержание страницы № 16
EN Menu options Most functions of your baby monitor can be operated using the local buttons on the units.The functions described below can only be operated remotely using the parent unit menu.The nightlight and lullaby functions can be operated using both menu and local keys. Note:All buttons mentioned are located on the parent unit. Menu operation - General explanation 1 Press the MENU button (B-2) to open the menu. > The first menu option appears on the display. 2 Use the – and + buttons (B-10
Краткое содержание страницы № 17
EN Menu options Playing lullabies To play or stop a lullaby: • Select | , using – and + (B-10). Confirm by pressing OK (B-7). • Select : to replay the last played lullaby or < | to stop playback. Confirm with OK (B-7). To select a different lullaby: • Select | , using – and + (B-10). Confirm by pressing OK (B-7). • Select ~, using – and + (B-10). Confirm by pressing OK (B-7). • Select the desired lullaby, using – and + (B-10). Confirm by pressing OK (B-7). Adjusting microphone sensitivity You ca
Краткое содержание страницы № 18
EN Menu options Setting room temperature range You can set the temperature range (minimum and maximum temperature) for your baby’s room. • Select B – – °, using – and + (B-10). Confirm with OK (B-7). > N appears on the display. Confirm with OK (B-7). • Set the desired minimum temperature, using – and + (B-10). Confirm with OK (B-7). • Set the desired maximum temperature, using – and + (B-10). Confirm with OK (B-7). Note:When the set maximum temperature is lower than the room temperature, the uni
Краткое содержание страницы № 19
EN Troubleshooting Problem Possible cause Solution LINK light (A-3, B-3) Parent unit: does not light at all. Power adapter (B-14) not Connect power adapter (B-14) to plugged in. wall outlet. Unit not turned on. Press and hold On/Off button (y) (B-6) for two seconds. Batteries are low. Recharge batteries (B-12). Batteries are empty. Replace batteries (B-12). Baby unit: Power adapter (A-14) not Connect power adapter (A-14) to plugged in. baby unit. Connect power adapter (A-14) to wall outlet. Unit
Краткое содержание страницы № 20
EN Troubleshooting Problem Possible cause Solution High pitched noise. Units are too close to each Move parent unit away from baby other. unit (at least 1 meter / 3 feet). Volume on parent unit Decrease volume (B-10) on set too high. parent unit. No sound/ Volume on parent unit is Increase volume on parent unit baby’s crying cannot set too low or switched off. (B-10). be heard. Microphone sensitivity level Increase microphone sensitivity set too low on parent unit. level in parent unit menu. Uni
Краткое содержание страницы № 1
SCD589
EN
User manual 4
FR
Mode d’emploi 28
ES
Instrucciones de manejo 52
Краткое содержание страницы № 2
Краткое содержание страницы № 3
A. Baby unit 1 11 10 2 9 3 8 13 7 4 5 6 12 14 B. Parent unit 9 9 11 8 8 10 13 1 7 6 2 5 3 4 + ++ + + + 12 14 15 17 16 3 + ++ + + + + ++ + + +
Краткое содержание страницы № 4
EN Welcome Philips is dedicated to producing caring,reliable products to give parents the reassurance they need. You can trust this Philips baby monitor to provide round-the-clock support by ensuring you can always hear your baby clearly without any disturbing noise.Your SCD589 uses DECT technology which guarantees zero interference from other wireless appliances and a clear signal between the parent unit and baby unit. Philips Baby Care, taking care together IMPORTANT SAFETY S INSTRUCTIONS This
Краткое содержание страницы № 5
EN Welcome 14 Unplug this product from the wall outlet, discontinue use and return the product to the Philips Service Location for examination and repair under the following conditions: A.When the power supply cord or plug is damaged or frayed. B. If the product has been exposed to rain or water. C. If the product does not operate normally by following the operating instructions. D. If the product’s cabinet has been damaged. E. If the product exhibits a distinct change in performance. 15 Do not
Краткое содержание страницы № 6
EN Welcome 11 If your product use rechargeable battery(ies), charge the battery(ies) only in accordance with the instructions and limitation specified in the user manual. 12 Risk of explosion if batteries are replaced by an incorrect type. For the parent unit, always use rechargeable batteries. SAVE THESE INSTRUCTIONS S CAUTION: Unplug power cord before replacing batteries. S Use only the adapter supplied with this baby monitor. Incorrect adapter polarity or voltage can seriously damage the baby
Краткое содержание страницы № 7
EN Legend of functions B. Parent unit B-1 TALK button B-2 MENU button B-3 LINK light B-4 Loudspeaker B-5 Microphone B-6 On/Off button (y) B-7 OK button B-8 Display B-9 Sound level lights B-10 Volume – / + buttons B-11 Recess for the belt clip or neck strap B-12 Battery compartment cover B-13 Belt clip B-14 AC power adapter B-15 Charging base B-16 POWER light B-17 Neck strap B-18 Travel bag C.What else you need Both units can be battery operated. For battery-operated use you’ll need: – 4 x 1.5V
Краткое содержание страницы № 8
EN Legend of functions D. Display Room temperature indicator Battery indicator Volume indicators Night light indicator Lullaby indicator Microphone sensitivity indicator U - Room temperature above temperature set in menu I - Room temperature below temperature set in menu O - No connection between units { - Volume indication S - Playback of lullaby interrupted Contents 13 Switching night light on / off 3 Illustrations 14 Paging the parent unit 4 Welcome 14 Playing lullabies 4 Important safety ins
