Руководство по эксплуатации Turbosound QIUCKSTAR AND RIGGING TCS-1061

Краткое содержание страницы № 1

TCS-1061

Quickstart and Rigging User Guide


















(Please refer to www.turbosound.com for the latest updates)
Version 1.0

Краткое содержание страницы № 2

Quick Start Guide TCS series The Flying Systems TCS series Quickstart Guide v1.0 - Page - 2

Краткое содержание страницы № 3

Quick Start Guide TCS series Safety Information Safety Notes on Rigging The Turbosound rigging system has been designed and constructed to a high standard of safety, and tested to the most demanding of specifications. In order to ensure the highest safety standards, this information on the assembly and safe use of rigging accessories must be understood and followed. Only use Turbosound recommended rigging accessories, which are specifically designed for their intended purpose. Do not

Краткое содержание страницы № 4

Quick Start Guide TCS series Flying system components have been individually tested in accordance with the following regulations: • The Health and Safety at Work Act 1974 • The Supply of Machinery (Safety) Regulations 1992 • The Lifting Operations and Lifting Equipment Regulations 1998 General Description To take full advantage of the extremely flexible properties of the TCS series loudspeaker, the rigging system is designed to be intuitive, inherently safe, flexible, and simple to use

Краткое содержание страницы № 5

Quick Start Guide TCS series FK-1061 FLYING SYSTEM WILL SUPPORT A COLUMN OF UP TO 5 CABINETS DEEP FK-1061 Flying Kit Enables suspension of a column of TCS-1061 cabinets up to 5 deep from a single flybar, and utilising an identical flybar fitted with pull-back links to provide a pull-back for the whole cluster. The kit consists of: 2 x flybars 2 x pull-back links 2 x blanking plates 2 x M6 x 20mm socket head screws 2 x M6 split washer The single flybar provides three pick up points

Краткое содержание страницы № 6

Quick Start Guide TCS series Setting the angle between cabinets Precise adjustment of inter-cabinet angle is achieved by selecting one of nine possible engagement positions of the rear flyplates, giving a range of angles between 0° and 16° in 2° increments. Rigging an Array of up to 16 cabinets with the FB-1061 flybar 1. Select a suitable pick up point on the flying grid, and choose the inter-cabinet angles to achieve the desired array angle. 2. Attach the external riggi