Краткое содержание страницы № 1
12V Lithium Ion Impact Driver
68568 12V Impact Driver
Read this material before using this product.
Failure to do so can result in serious injury.
Save this manual.
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Visit our website at: http://www.harborfreight.com
© ®
Copyright 2011 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein ma
Краткое содержание страницы № 2
Specifications Charger Input 120 V~ / 60 Hz / 1.5 A DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. Motor Speed 0 - 2000 IPM (impact per minute) Chuck 1/4” Hex Settings Forward / Reverse WARNING indicates a hazardous situation which, if Max. Torque 384 in.-lbs. not avoided, could result in death or serious injury. Charging Time 1 Hour Battery Type 12V, Li-Ion; 1300 mAh CAUTION, used with the safety alert symbol, indicates a hazardous situa
Краткое содержание страницы № 3
3. Personal safety power tool’s operation. If damaged, have the power tool repaired before use. Many accidents a. Stay alert, watch what you are doing and use are caused by poorly maintained power tools. common sense when operating a power tool. Do not use a power tool while you are tired or under f. Use the power tool, accessories and tool bits the influence of drugs, alcohol or medication. etc. in accordance with these instructions, A moment of inattention while operating power takin
Краткое содержание страницы № 4
6. The battery charger gets hot during use. Lithium Battery Safety Warnings The charger’s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment. Do not place the charger on a flammable surface. Do not obstruct any vents on the charger. Especially avoid placing the charger on carpets and rugs; they are not only flammable, but they also obstruct vents under the charge
Краткое содержание страницы № 5
5. Include vibration-free periods each day of work. Extension Cords 6. Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work. Note: Extension cords must not be used with this item’s charger. 7. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. Symbology SAVE THESE Double Insulated INSTRUCTIONS. Canadian Standards Association Grounding Underwriters Laboratories, Inc.
Краткое содержание страницы № 6
Instructions for Putting into Use Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Unlock and release the Trigger and disconnect Battery Pack before assembling or making any adjustments to the tool. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and A
Краткое содержание страницы № 7
WARNING! Do NOT use a different Charger Operating Instructions or Battery to power this Impact Driver. General Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before TO PREVENT SERIOUS INJURY FROM set up or use of this product. ACCIDENTAL OPERATION: Unlock and release the Trigger and disconnect Battery Tool Set Up Pack prior to making any adjustments to the tool. 1. With a charged Ba
Краткое содержание страницы № 8
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Unlock and release the Trigger and disconnect Battery Pack before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Mainte
Краткое содержание страницы № 9
Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. 1. No power at outlet during 1. Check power at outlet. If outlet is unpowered, charging. turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads. 2. Internal damage or 2. Have technician service tool. wear. (Carbon brushes or switch, for example.) Performance 1. Accessory dull or damaged. 1. Keep accessories sharp. Replace as n
Краткое содержание страницы № 10
Parts List and Assembly Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THA
Краткое содержание страницы № 11
Parts List and Assembly Diagram Assembly Diagram SKU 68568 For technical questions, please call 1-800-444-3353. Page 11
Краткое содержание страницы № 12
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installatio
