Руководство по эксплуатации Axor Citterio 39156XX1

Краткое содержание страницы № 1

Installation Instructions / Warranty
Citterio
39136XX1
39156XX1
Citterio
39236XX1

Краткое содержание страницы № 2

Axor Citterio Widespread Lav Mixer 39136XX1 Axor Citterio Bidet Mixer 39236XX1 39136XX1 39156XX1 39236XX1 User instructions Turn the right handle forward (clockwise) to turn the cold water on. Turn the handle back (counter-clockwise) to turn the cold water off. Turn the hot handle forward (counter-clockwise) to turn the hot water on. Turn the hot handle back (clockwise) to turn the hot water off. Technical Data Recommended hole size spout 1 3/8“ valves 1 1/4“ Maximum depth of mounting

Краткое содержание страницы № 3

Assembly • Install the valves to the lavatory. • Install the valve mounting screws, but do not tighten them. • Install the spout to the handle assembly. Use a 5 mm allen wrench to install and tighten the spout retaining screws. • Place the spout and handle assembly over the valve bodies. Tighten the valve mounting screws. • Install the drain pull rod. Place the spout mounting piece and the nut over the threaded shank on the bottom of the spout assembly. Tighten the nut. 3

Краткое содержание страницы № 4

• Place a compression nut and ferrule over the spout tube. • Install the mounting angle. Tighten the compression nut by hand, then finish tightening with a wrench. • Screw the hot and cold connection hoses to the mounting angle. • Place a compression nut and washer over the shank end of one of the connection hoses. • Attach the hose to the outlet port on the valve with the compression fitting. Tighten with a wrench. Repeat with the other connection hose. • Install the supply h

Краткое содержание страницы № 5

Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. plunger Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and replace. height adjuster Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. flange From under the sink, install the black mack gas- ket, white friction ring and retainer nut to the flange. Do not tighten the nut against the bottom of the sink at this time. seali

Краткое содержание страницы № 6

Replacement Parts 1 handle 39293XX0 2 cold escutcheon 96679XX0 3 hot escutcheon 96678XX0 4 escutcheon 96680XX0 5 cold cartridge 94008000 6 hot cartridge 94009000 7 aerator - lavatory 96673000 8 aerator - bidet 94005XX0 9 bidet swivel 96050XX0 10 spout - lavatory 5 1/2” 96674XX0 11 spout - bidet 96675XX0 12 pull rod 96676XX0 13 spout mounting kit 96016000 XX = Color code 00 chrome plated 82 brushed nickel Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products util

Краткое содержание страницы № 7

Important • Soap and shampoo residue can also cause damage to the product. Rinse well with clean water after use. • If the surface is already damaged, harsh cleaning materials will cause further damage. Limited Lifetime Consumer Warranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in eit

Краткое содержание страницы № 8

EXCLUSIONS AND LIMITATIONS REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE PRICE) AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. HANSGROHE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO CREATE FOR IT ANY OBLIGATION OR LIABILITY IN CONNECTION WITH THIS PRODUCT. HANSGROHE SHALL NOT BE LIABLE TO PURCHASER OR ANY PERSON FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, ARISING OUT OF BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY (INCL