Руководство по эксплуатации Maytag 130116

Краткое содержание страницы № 1

CHARGE-IT-ALL SPORT
AC/DC LiPO/NiMH/NiCD CHARGER with Peak-Detection
Circuitry and Auto Voltage Sensor
Product Part # 130116
Charge-It-All Sport Features:
l
AC/DC Input Voltage (110V or 12V)
l
Peak-Detection Circuitry with Timed Safety Auto-Cutoff
l
1A, 2A, 3A, 4A or 6A Selectable Charge Rates in NiCD/NiMH Mode
l
100mAH, 300mAH, 700mAH, 1.3A or 2A Selectable Charge Rates in Lithium Mode
l
Charges 1 - 8 NiCD or NiMH Cells and 1-3 LiPO Cells
l
Included with Your Charger:
Automatic Voltage Detectio

Краткое содержание страницы № 2

l Choose the charge type (either NiMH, NiCD or Lithium) by pressing Charge-It-All Sport Safety Features: and holding the MODE button for l If the battery pack polarity is reversed or if the battery pack has a short circuit, 1.5 seconds. The charge mode the charger will shut off and the charge rate LEDs will blink together. If this will change as indicated by the happens, unplug the battery pack from the charger and double-check all wires green LED. If your battery has for polarity and short c

Краткое содержание страницы № 3

l After selecting the proper charge rate and double-checking that the proper charge mode is selected, press the START/STOP button to begin the charge process. During the charge process the red LED will be steady. If you need to stop the charge process before charging is complete, press the START/STOP button again or disconnect your battery from the charger. IMPORTANT If there is a battery error (i.e., reversed polarity or internal short), the charge rate LEDs will blink together shortly after

Краткое содержание страницы № 4

4