Краткое содержание страницы № 1
FF520
INSTALLATION and OPERATION GUIDE
Краткое содержание страницы № 2
This guide relates to the following GPS CHART PLOTTERS: CP180, CP180i, CP300, CP300i, CPV350, CP500 and CPV550. For older GPS Chart Plotters, the manual is available for download at www.standardhorizon.com or by contacting Marine Product Support at 800-767-2450. FCC Compliance Statement This device complies with Part 15 of the FCC limits for Class A digital devices. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the in
Краткое содержание страницы № 3
TABLE OF CONTENTS 1. INTRODUCTION ........................................................................................................ 7 1.0 GENERAL INFORMATION ............................................................................... 7 1.1 PACKING LIST ................................................................................................. 8 1.1.0 Replacement Part ................................................................................ 8 2. MOUNTING THE FF520 ........
Краткое содержание страницы № 4
5.1.2 Zoom Full page .................................................................................. 28 5.1.3 Chart/Fish ........................................................................................... 29 5.2 GAIN MODE .................................................................................................... 29 5.2.0 Auto Mode .......................................................................................... 29 5.2.1 Manual Mode ...................................
Краткое содержание страницы № 5
1. INTRODUCTION This chapter provides basic information in becoming familiar with the advanced functions of the FF520 before you start using it combined with the STANDARD HORIZON GPS Chart Plotters. 1.0 GENERAL INFORMATION The STANDARD HORIZON GPS Chart Plotters combined with the sonar performance of the FF520 creates the most advanced marine navigation system available. This Owner's Manual covers the Fish Finder functions of the FF520 when used with the STANDARD HORIZON GPS Chart Plotters. The
Краткое содержание страницы № 6
Performance of the FF520 used in conjunction with optional transducers (sold separately) will vary based on water conditions, bottom composition, boat hull, vessel speed, installa- tion, and specific transducer model. This includes but is not limited to both minimum and maximum depth performance. 1.1 PACKING LIST When the package containing the FF520 is first opened, please check for the following contents. 1.1.0 Replacement Part Replacement part Item S8101640 Tee cable FF520 S8101641 Power cab
Краткое содержание страницы № 7
2. MOUNTING THE FF520 The FF520 must be properly installed according the following instructions to get the best possible performance. NOTE TRANSDUCER: refer to Chapter 3 and to the Installation Manual supplied with the Transducer. 2.0 INSTALLATION The FF520 is designed to be mounted horizontally or vertically to enable it to be installed in the most convenient position. Although the unit is water resistant, care must be taken to select a location where it will not be subjected to spray or rain.
Краткое содержание страницы № 8
2.2 POWER CONNECTIONS It is recommended the installation of a switch and a 5A fuse (not supplied) in the positive DC supply to the FF520. The installation of a switch is necessary to turn On or Off the FF520. Standard Horizon recommends connection the FF520 and GPS Chart Plotter to the same switch and fused source as shown in the following images below. 2.3 GPS CHART PLOTTER CONNECTIONS The FF520 is connected to Standard Horizon GPS Chart Plotters via the TEE Cable. Refer to the following images
Краткое содержание страницы № 9
1. Open the FF520 box by unscrewing the four screws. 2. Once the screws are removed, pull out the panel and the Printed Circuit Board (PCB). 3. Unscrew the cables from the PCB. 4. Wire the cables as needed. 5. Reconnect the cables to the PCB. Figure 2.4c - Internal connections 6. Push the panel towards the case (be sure to have well positioned the rubber gasket). 7. Close the FF520 box by screwing the four screws. IMPORTANT Refer to software setup section after connections have been made. FF520
Краткое содержание страницы № 10
FF520 Fish Finder FF520 Fish Finder 2.4.0 CP180 and CP180i Switch Fuse - + Red BATTERY Black Accessory cable Green NMEA Common Blue Port1 Input Brown Port1 Output Gray Port2 Input White Port2 Output Note: Gray and White wires should not be connected Yellow Port3 Output to other devices when the FF520 is connected. 2.4.1 CP300 and CP300i Switch Fuse - + BATTERY Accessory cable Red Black Green NMEA Common Blue Port1 Input Brown Port1 Output Gray Port2 Input Note: White Port2 Output Gray and White
Краткое содержание страницы № 11
FF520 Fish Finder FF520 Fish Finder 2.4.2 CPV350 Switch Fuse Red - + BATTERY Black Accessory cable Red Black Green NMEA Common Blue Port1 Input Brown Port1 Output Gray Port2 Input White Port2 Output Note: Gray and White wires should not be connected Yellow Port3 Output to other devices when the FF520 is connected. 2.4.3 CP500 Switch Fuse - + BATTERY GPS ANT PWR & ACC 1 ACC 2 VIDEO OUT VIDEO IN 1 VIDEO IN 2 Note: The Tee cable is supplied with the FF520. If the FF520 is not connected, plug the Ac
Краткое содержание страницы № 12
FF520 Fish Finder 2.4.4 CPV550 Switch Fuse Red - + 1 RAM 2 BATTERY Black I/O AUX GPS VIDEO 1 VIDEO 2 Accessory cable Red (no connection) Black (no connection) Green NMEA Common Blue Port1 Input Brown Port1 Output Gray Port2 Input Note: White Port2 Output Gray and White wires should not be connected Yellow Port3 Output to other devices when the FF520 is connected. 2.5 SOFTWARE SETUP After connections have been made, the GPS Chart Plotter must be setup to communicate with the FF520. Port 2 of the
Краткое содержание страницы № 13
a. NMEA device capable of listening to DBT, DPT, VHW, VLW, MTW b. Temperature sensor (10K ohms at 77°F) c. 12VDC alarm buzzer (400mA max current draw) WIRE COLOR FUNCTION BLACK GND RED Not connected WHITE NMEA Output(+) GREEN NMEA GROUND GRAY Not connected YELLOW Temp 2 INPUT(+) Not connected BROWN BLUE Alarm OUTPUT(+) ORANGE Not connected PINK Not connected Figure 2.6 - The FF520 Optional Connections 2.6.0 NMEA Output The following sentences are output: DPT and DBT (Depth), VHW (Speed), VLW (Tr
Краткое содержание страницы № 14
Page 16 FF520
Краткое содержание страницы № 15
3. TRANSDUCER WARNING When plugging in or unplugging a transducer to the FF520 make sure power is turned Off. The transducer is a device that transmits and receives sound waves into the water. The active component inside the transducer is commonly referred to as an element but actually is a piezoelectric ceramic material. 3.0 TRANSDUCER MOUNTING 3.0.0 Power Boats Basically there are two hull types of powerboats: Planing and Displacement. In the following pictures the boxes with lines are where t
Краткое содержание страницы № 16
3.0.3 Low Profile Thru-Hull If the user is planning to mount a thru-hull transducer first he has to know the dead rise angle where the transducer will be located on the boat. The "Dead Rise" is a nautical term that refers to the angle of the hull where the transducer will be mounted (see picture below). Specific transducers are designed to be installed on boats with different dead rises. Figure 3.0.3 - Dead rise 3.0.4 Transom (POWER BOATS ONLY) The back of a boat is called the transom this is wh
Краткое содержание страницы № 17
3.0.8 3.0.8 3.0.8 3.0.8 3.0.8 Fish Finder Basics Fish Finder Basics Fish Finder Basics Fish Finder Basics Fish Finder Basics The FF520 consists of a high power transmitter, sensitive receiver and a transducer. The FF520 sends an electrical pulse to the transducer, which contains an element that converts the pulse into acoustic (sound) wave, which is sent through the water. As this wave travels from the transducer to the bottom, it may strike fish, structures, thermalclines (temperature changes i
Краткое содержание страницы № 18
Page 20 FF520
Краткое содержание страницы № 19
4. OPERATION 4.0 UNDERSTANDING THE FISH FINDER PAGE The display on STANDARD HORIZON GPS Chart Plotters shows a history of time of the echoes received by the transducer. The STANDARD HORIZON GPS Chart Plotters have a menu that allows adjustments to receiver sensitivity, depth range and scrolling speed of the Fish Finder display. Figure 4.0 - The Fish Finder page Following there is a brief description of terms listed in the previous Figure: Warning Message This is a flashing label that is turned O
Краткое содержание страницы № 20
Shallow Alarm Bar Located on the right side of the depth ruler showing the range outside of which the depth measurement will trigger a Shallow Alarm. Range Bar Vertical graduated bar that is located along the right side of the screen. It is a scale which reflects the depth of the area being displayed. Variable Depth Marker (VDM) Horizontal line on to the Fish Finder page window with a depth label. Move the ShuttlePoint knob Up or Down to change the position of the VDM. The label displays the de
