Руководство по эксплуатации Flymo Turbo Lite 350/400

Краткое содержание страницы № 1

For all customer enquiries or for replacement parts, contact:-
☎ ☎ 01325 300303
www.flymo.com
eop.customer.services@electrolux.co.uk
IMPORTANT INFORMATION
Read before use
& retain for future reference

Краткое содержание страницы № 2

Carton Contents IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. cable clip x 2 upper handle IF ANY PARTS ARE MISSING CONTACT:- Electrolux Outdoor Products bolt x 2 Customer Service Department direct nut x 2 Telephone : 01325 300303, Fax : 01325 318193 washer x 2 plastic handle knob x 2 electric cable with moulded on plug lower handle fixing pin x 2 instruction manual spanner/scraper tool cutting height spacers (Turbo Lite 330 - 1 fitte

Краткое содержание страницы № 3

7. Always switch off at the mains before disconnecting 8. Do not walk backwards when mowing, you could trip. any plug, cable connector or extension cable. 9. Never cut grass by pulling the mower towards you. 8. Switch off, remove plug from mains and examine 10. Switch off before pushing the mower over sur- electric supply cable for damage or ageing before faces other than grass. winding cable for storage. Do not repair a dam- 11. Never operate the lawnmower with damaged aged cable, replace it

Краткое содержание страницы № 4

Assembly A lower handle Fitting the Lower Handles to Your Lawnmower (A) slots 1. Place the end of the lower handle into the slots. 2. Secure lower handles to hood by firmly pushing fix- ing pin through holes in hood and handle. 3. Repeat on the other side. • NOTE fixing pin Should a problem occur when securing handle to hood with the fixing pin, carefully lever fixing pin out of location and repeat steps 1 to 3 above. B Fitting Upper Handles to Lower Handles (B) 1. Ensure the upper handle is lo

Краткое содержание страницы № 5

Starting and Stopping D To Start your Lawnmower 1. Connect female extension cable connector to the back of the switchbox. (Turbo Lite 350/400 only) (D) 2. Form loop in mains cable and push the loop through the slot as illustrated in picture (E) 3. To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture E F (F). 4. Connect plug to mains and switch on. 5. Move handle to the mowing position. 6. To prevent a ring being cut in your lawn, tilt your law

Краткое содержание страницы № 6

Removing the Blade and Fan M 1. To remove the blade bolt, hold the fan firmly and with the spanner provided loosen the blade bolt by turning it anti-clockwise (M). 2. Remove the blade bolt, blade, spacers and fan. 3. Inspect for damage and clean as necessary. • Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition. Fitting the Blade and Fan • If the blade is cracked or damaged replace it N with a new one. • Never use a blade bolt if the insulat

Краткое содержание страницы № 7

Service Recommendations 1. We strongly recommend that your product is serv- A network of specialist dealers can be found in your iced at least every twelve months, more often in a local Yellow Pages. professional application. To obtain service on your Flymo product simply tele- 2. Always use genuine Flymo Spare Parts. phone or visit your local Service Centre. 3. Prepacked spares are available from most Should you require service under the terms of our Electrolux Outdoor Products stockists. gua

Краткое содержание страницы № 8

EC Declaration of Conformity I, the undersigned M. Bowden of Electrolux I, the undersigned M. Bowden of Electrolux I, the undersigned M. Bowden of Electrolux Outdoor Products, Aycliffe Industrial Park, Outdoor Products, Aycliffe Industrial Park, Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Durham. DL5 NEWTON AYCLIFFE, Co. Durham. DL5 NEWTON AYCLIFFE, Co. Durham. DL5 6UP. Certify that the product:- 6UP Certify that a sample of the above 6UP Certify that a sample of the ab