Краткое содержание страницы № 1
Safety Instructions & Operator’s Manual for
SCRAMBLER
HYDRO DRIVE
SERIES 6
MODELS
YZ18426BVE
YZ20486BVE
MODEL NUMBER EXPLANATION
Y Z 18 42 6 B V E
MODEL DESIGNATION ENGINE OPTIONS
DRIVE SYSTEM TYPE ENGINE TYPE
ENGINE HORSE POWER * ENGINE MODEL
CUTTING WIDTH SERIES DESIGNATION
Y – SCRAMBLER 18 – 16 HP Engine 42 - 42” Cutting Deck 6 - Series Designation B - Briggs Engine V – Over Head Valve
Z – Zero Turning Radius 20 – 20 HP Engine 48 - 48” Cutt
Краткое содержание страницы № 2
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS PREPARATION OPERATION (Continued From Previous Page) 1. Mount and dismount machine from left side. 7. Keep people and pets out of mowing area. Keep clear of discharge opening at all times. Immediately STOP blades, STOP engine, and 2. Start engine from operator's seat, if possible. STOP machine if anyone enters the area. Make sure blades are OFF and parking brake is 8. Check shields, deflectors, switches, blade set. controls and other safety devices fr
Краткое содержание страницы № 4
IMPORTANT SAFETY INSTRUCTIONS TOWING MAINTENANCE 1. Tow only with a machine that has a hitch (Continued From Previous Column) 15. Maintain or replace safety and instruction labels designed for towing. DO NOT attach towed as necessary. equipment except at the hitch point. 16. Use only genuine SNAPPER replacement parts 2. Follow the manufacturer’s recommendation for to assure that original standards are weight limits for towed equipment and towing maintained. on slopes. 3. DO NOT
Краткое содержание страницы № 5
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS........................................................................ 2-4 TABLE OF CONTENTS......................................................................................................5 SECTION 1 - FAMILIARIZATION.......................................................................................6 SECTION 2 - OPERATING INSTRUCTIONS............................................................... 7-10 Pre-start Checklist ..........
Краткое содержание страницы № 6
Section 1 - FAMILIARIZATION PARKING BRAKE BRAKE RELEASE OPERATOR’S BUTTON SEAT CONTROL PANEL: ENGINE SPEED & CHOKE JOYSTICK BLADE SWITCH CONTROL HANDLE KEY SWITCH DECK LIFT HANDLE DISCHARGE IMPORTANT! The figures and illustrations in DEFLECTOR this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions. FIGURE 1.1 1.1 INTRODUCTION 1.2 NOMENCLATURE This manual has been prepared fo
Краткое содержание страницы № 7
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST 2.1.5. Clean exterior surfaces of cutting deck and Make the following checks and perform the service engine of any accumulation of dirt, grass, oil, etc. required before each start-up. Keep engine air intake screen and cooling fins clear 2.1.1. Check tires and add or release air as needed at all times. to bring pressure to 12 P.S.I. in front and 12 P.S.I. in 2.1.6. Add fuel to tank of the SCRAMBLER outside rear tires.
Краткое содержание страницы № 8
Section 2 - OPERATING INSTRUCTIONS IMPORTANT: This SCRAMBLER is equipped with 8. After engine starts, turn off choke. Move engine hydrostatic drive. The forward, rearward and speed control back to the desired speed position. steering movement of the machine is controlled by a Allow a brief warm-up until engine runs smooth. joystick lever. Joystick operations should be performed only from the operator’s position in the WARNING seat. A small movement of the joystick can cause the machi
Краткое содержание страницы № 9
Section 2 - OPERATING INSTRUCTIONS 2.2.2. MOWER BLADE 2.3 STOPPING 1. With engine running, move engine speed control 2.3.1. ENGINE to the Rabbit or “Fast” position. (IMPORTANT: On 1. Stop engine by turning key to the “STOP” 42” models, be careful not to move control past position. See Figure 2.8. “Fast” detent, or choke will engage and engine will stall.) 2. Pull the blade switch out into the “ON” position to engage the mower blades. See Figure 2.7. TU
Краткое содержание страницы № 10
Section 2 - OPERATING INSTRUCTIONS 2.3.5. CUTTING HEIGHT ADJUSTMENT 2.4 SAFETY INTERLOCK SYSTEM CHECKS This machine has seven different cutting height This machine is equipped with an electrical safety positions. IMPORTANT: When positioning the interlock system that is provided for the safety of the operator and others. All safety devices must be in place cutting deck into a higher cutting position, pull up on the deck lift handle only, it is not necessary to and functioning properly bef
Краткое содержание страницы № 11
Section 3 - MAINTENANCE 3.2.2. SERVICE ENGINE AIR CLEANER 3.1 INTRODUCTION The engine is equipped with a dual element air To retain the quality of the SCRAMBLER, use genuine cleaner. Both the foam pre-cleaner and cartridge SNAPPER replacement parts only. Contact a local require service. Refer to Engine Owner's Manual SNAPPER dealer for parts and service assistance. For for recommended service procedures. the correct part or information for a particular mower, always mention the m
Краткое содержание страницы № 12
Section 3 - MAINTENANCE 3.2.4. CHECK MOWER DRIVE BELT a. 20 Hp Engines: Change air filter. Remove 1. Footrest/Floor pan Removal bolts that secure air cleaner cover. See Figure 3.4. a. Pull deck lift handle to highest cutting position. IMPORTANT: When cover is removed, you are See Figure 3.3. viewing the carburetor side of the air filter, which will b. Remove the two knobs that secure the rear of the appear clean. Remove filter and pre-cleaner for floor pan. inspection. c. Remove t
Краткое содержание страницы № 13
Section 3 - MAINTENANCE 3.3 SERVICE EVERY 25 OPERATING HOURS c. Reinstall air cleaner cover. Insert tabs located at 3.3.1. ENGINE the bottom of the cover into corresponding slots in 5. Air Filter engine cover. Position cover and engage latch over c. Reinstall air cleaner cover. Insert tabs located cover and rotate and push down to lock. on the engine cover into corresponding slots in air 3.3.2. MOWER COMPONENTS cleaner cover. IMPORTANT: The yellow tabs must 1. Mower Drive Belt be
Краткое содержание страницы № 14
Section 3 - MAINTENANCE WARNING ACCESS HOLE FRONT STRUCTURE DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. LUBRICATE PIVOT Remove spark plug wire from spark plug and secure SHAFTS wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool. 5. Mower Blade Spindle - Lubrication b. 42” Deck spindle assemblies
Краткое содержание страницы № 15
Section 3 – MAINTENANCE 3.4 SERVICE - ANNUALLY 3.5 STORAGE (OUT OF SEASON) Perform all maintenance as described in the maintenance Perform the following procedures to insure the schedule. SCRAMBLER will operate properly when taken out of 3.4.1. Engine storage. Service engine according to engine owner’s manual. 3.5.1. Thoroughly clean the SCRAMBLER by removing all grass clippings and debris. 3.4.2. Air Filter 3.5.2. Perform maintenance and lubrication as Refer to engine owner’s
Краткое содержание страницы № 16
Section 4 - ADJUSTMENTS & REPAIR SPINDLE PULLEY SPINDLE PULLEY WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components IDLER PULLEY can be extremely hot. Avoid burns by allowing STATIONARY PULLEY engine and components sufficient time to cool. 4.1 ENGINE ADJUSTMENTS & REPAIR 42” DECKS ELECT
Краткое содержание страницы № 17
Section 4 - ADJUSTMENTS & REPAIR 4.2.5. BLADE BRAKE WARNING The blade switch engages the electric clutch when pulled out to the “ON” position. When the blade DO NOT attempt any adjustments, maintenance or switch is in the “ON” position the cutting blade(s) service with the engine or blade running. STOP are engaged. The blade switch disengages the blade. STOP engine. Set brake. Remove key. electric clutch when the blade switch is pushed in to Remove spark plug wire from spark plug an
Краткое содержание страницы № 18
Section 4 - ADJUSTMENTS & REPAIR 1. Place SCRAMBLER on a smooth level WARNING surface. 2. Remove footrest/floor pan assembly. DO NOT attempt any adjustments, maintenance or 3. Rotate outside blades so tips are pointed to the service with the engine or blade running. STOP front and rear of deck. Measure the distance from blade. STOP engine. Set brake. Remove key. blade tips to floor. The distance should be the Remove spark plug wire from spark plug and secure same, or the rear 1/4”
Краткое содержание страницы № 19
Section 4 - ADJUSTMENTS & REPAIR f. Loosen the shoulder bolt that retains the WARNING eccentric. DO NOT attempt any adjustments, maintenance or g. Turn eccentric “UP” or “DOWN” as required service with the engine or blade running. STOP until blade tips are within 1/8” of the same blade. STOP engine. Set brake. Remove key. distance from the floor. See Figure 4.7. Remove spark plug wire from spark plug and secure h. Tighten shoulder bolt loosened in Step “f”. wire away from spark pl
Краткое содержание страницы № 20
Section 4 - ADJUSTMENTS & REPAIR ADJUSTING WARNING NUT DO NOT ADJUST DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing TIMING engine and components sufficient time to cool. ROD 4.2.9. MOWER DECK ADJUSTMENT (LEVELNESS) (Continued From Previous Page)
