Краткое содержание страницы № 1
OWNER’S
MANUAL
STARTING SERIAL #:
99-307001
MODEL NO.
T1260
T1360
T1460
60” UNIVERSAL
TRAILMOWER
IMPORTANT
Read and follow all
Safety Precautions and
Assembly
Instructions before
operating this
Operation
equipment.
Service and Adjustment
Rev.04-288
Repair Parts
Made In The
P.O. BOX 67, WARRENSBURG, MISSOURI 64093 PHONE 660-747-8183 FAX 660-747-8650
Manufacturing quality lawn care equipment since 1945 USA
ONT60
Краткое содержание страницы № 2
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warranty is subject to the following limitations and exclusions: 1) Engine Warranty All engines utilized on our products have a separate
Краткое содержание страницы № 3
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine can amputate hands, feet, and throw objects. Failure to observe the following safety instructions could result in serious injury or death. • Read the manual. Learn to operate this machine safely. • Always disc
Краткое содержание страницы № 4
• T u rn o ff th e b la d e s w h e n n o t m o w in g . B e fo re le a v in g th e m a c h in e , tu rn o ff th e b la d e s a n d s to p th e e n g in e . • W a tc h fo r tra ffic w h e n o p e ra tin g n e a r o r c ro s s in g ro a d w a y s . • D o n o t o p e ra te th e m o w e r if it h a s b e e n d ro p p e d o r d a m a g e d in a n y m a n n e r o r if th e m o w e r v ib ra te s e x c e s s iv e ly. E x c e s s iv e v ib ra tio n is a n in d ic a tio n o f d a m a g e . R
Краткое содержание страницы № 5
662 REQUIRED ASSEMBLY FRONT WHEEL CASTER ASSEMBLY 1. Remove single nut and washers from caster shaft. 2. Place one washer on the shaft of the caster/wheel sub-assembly. 3. Slide same shaft through the bearing/frame with wheel towards the ground. 4. Place the other washer on the shaft; it should be resting on the top bearing. 5. Thread nyloc jam nut onto shaft. 6. Tighten nut snuggly, making sure shaft threads enter the nyloc of the nut. Over- tightening of this nut will bind caster. 7
Краткое содержание страницы № 6
OPERATING YOUR TRAILMOWER The operation of any mower can produce foreign objects to be thrown into the eyes, resulting in severe eye damage. Always wear certified safety glasses or wide-vision safety goggles over spec tacles before staring any cutting machine and while operating such a machine. The operation of any cutter produces sound waves that are damaging to the human ear. Ear protection is recommended. CAUTION! Tragic accidents can occur if the operat
Краткое содержание страницы № 7
• Make sure the tow vehicle parking brake is set, mower is level, and blades are disengaged. • Check spark plug wire, oil, and fuel. • Check all electrical connections (See Schematics). • Make sure toggle switch is turned “ON” and the red tether is properly attached. • Set engine idle to “CHOKE” position. • With feet clear of mower deck, turn key switch to the “START” position; [ if unit is equipped with 12 volt system ] release when engine begins to run. • For units NOT equipped with el
Краткое содержание страницы № 8
ALTERNATIVE STOPPING METHOD • Bring vehicle to complete stop, shut off engine, and set parking brake. • Disengage blade engage lever (681N). • Manually shut toggle and key switches to their “OFF” positions. • Always remember to remove keys to avoid irresponsible usage. TRANSPORTING MOWER • Stop mower properly. • Place mower deck in its highest position. • If transporting unattached from tow vehicle, then remove spark plug wire and place where it cannot contact the spark plug. SUGGE
Краткое содержание страницы № 9
MOWER MAINTENANCE GENERAL RECOMMENDATIONS The warranty on this Trailmower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain unit as instructed in this manual. Some adjustments will need to be made periodically to maintain your unit properly. All adjustments in this manual should be checked at least once each season. BEFORE EACH USE • Check engine oil level on a level surface. (Check twice to
Краткое содержание страницы № 10
NB122 NB126 NB195 664N NB149 F4157WF Figure 01 Figure 02 H11 H10TK H10TK 661 H11 Figure 03 H11 661A 661 662 NB136 CH5S NB181 6031TK steel chute replaces plastic chute shown Figure 04 10
Краткое содержание страницы № 11
08 03 05 06 07 02 04 SERIAL NUMBER 01 13 08 12 09 11 02 10 Figure 05 Item # Description Part # Item # Description Part # 1 Grass Chute 6031TK 8 Height Adjust Assembly H7N Bolt/Nut NB136/NB181 Eye Bolt 6599 Spring CH5S Stabilizer Arm 6696 2 Tire/Wheel/Bearing F4157W Plastic Bushing T2PB 3 Right Belt Guard 6155RN Ruler Decal OD41 Acorn Nut NB120 Knob H7K 4 No Step Decal OD11 5/16 Pal Nut NB276 5 Height Adjust Assembly H7N 9 Engine Plate 6155NFC Plastic Bushing T2PB 10 Front Caster Assembly 6774C
Краткое содержание страницы № 12
15 23 REAR 16 28 29 15 17 16 18 28 14 26 21 29 22 27 18 27 16 KEY 19 SWITCH 25 20 24 FRONT Figure 06 Item # Description Part # Item # Description Part # 14 Clutch Idler Rod/Spring 3123TK/682S 22 Blade Driver Left 9086 15 Idler Rod/Spring 6704TK/682S 23 Deck 6725C 16 Idler Pulley B527 24 Warning Serious Injury Decal OD45 17 Clutch Idler Arm 6709TK 25 5 MPH Decal OD33 18 Idler Bracket 6681TK 26 Caution - Deflector Decal OD43 19 Throttle Decal OD58 27 60" Decal OD99128 20 Blade Driver Center 9084
Краткое содержание страницы № 13
31 31 31 31 31 3 20 6 32 31 Figure 07 Item # Description Part # 30 Blade (3) 9004 31 Anti-Scalp Roller AS001 32 Rear Axle 664N MIDDLE CENTER BOTTOM CENTER BLADE DRIVER BLADE DRIVER PULLEY BELT 66LR2 PULLEY BELT 66LR2 TOP CENTER BLADE ENGINE PULLEY BELT 644 DRIVER PULLEY REAR ENGINE PULLEY BELT CONFIGURATION 13 LEFT RIGHT
Краткое содержание страницы № 14
ENGINE 689L 9031 688 689S 699 NB452N (Briggs & Honda) NB238N (Tecumseh) Not Shown OIL DRAIN VALVE + CAP AS122, AS123 ENGINE PULLEY ASSEMBLY 14
Краткое содержание страницы № 15
BLADE DRIVER ASSEMBLIES EFFECTIVE AFTER SERIAL# L199307001 NB175 6114 AS155 6114CS NB179 9091TK (re-enforcement will vary from what is shown) B98 9075 shaft replaces RIGHT both the 9002 shaft & 9010 spacer NB175 NB179 AS155 B98 9008 NB216 6114 9004 NB179 NB166 NB607 NB607 NB238N B98 9077 shaft replaces both the 9000 shaft and the 9010 CENTER B99TK spacer B98 9008 NB179 NB216 9004 NB607 NB238N NB166 15
Краткое содержание страницы № 16
LEFT NB175 AS155 6114 6104RS B98 9078 shaft replaces both the 9001 shaft and the 9010 spacer B99TK NB179 B98 NB216 9008 9004 NB607 NB238N NB166 16
Краткое содержание страницы № 17
ELECTRIC START WIRING SCHEMATIC ATTACH RED TETHER HERE HONDA WIRING SCHEMATIC ATTACH RED TETHER HERE 17
Краткое содержание страницы № 18
Items Not Shown Item Part # Wiring Harness (Briggs) WHN60B Wiring Harness (Tecumseh) WHN60T Wiring Harness (Honda) WHN60H Solenoid 9043 Frame Caster Bearings B98 Key Switch KS12 Battery Cable - Red BCSR Battery Cable - Black BCS Engine Belt 644 Blade Driver Belts 66LR2 18
Краткое содержание страницы № 19
NOTES 19
Краткое содержание страницы № 20
60” UNIVERSAL TRAILMOWER OWNER’S MANUAL HOW TO ORDER REPAIR PARTS: Each mower has its own model number. Each engine has its MODEL NO. own model number. The model number for the mower will be found on the right hand side of the frame above the right rear T1260 wheel. The model number for the engine will be found on the top of the blower fan housing. All mower parts listed herein may be ordered directly from T1360 Swisher Mower & Machine Co. Inc. or your nearest Swisher dealer. T1460 All
