Руководство по эксплуатации Newcon Optik SIB 16x40 GR

Краткое содержание страницы № 1

Operation Manual






























SIB 16x40 GR


BINOCULAR


WITH IMAGE STABILIZATION




NEWCON ™ 2005© Printed in Canada
In USA: 3310 Prospect Ave. Cleveland, OH 44115
In Canada: 105 Sparks Ave, Toronto, ON M2H 2S5 Canada

Краткое содержание страницы № 2

10. QUALITY CERTIFICATE IMPORTANT INFORMATION The SIB 16x40 GR is suited for usage. Read prior to activation You have just purchased a complicated electronic device. To Production date ____________________________ operate it properly, please read this manual carefully. Here are some common precautions that must be noted. Serial number ______________________________ • NEVER hit the unit while operating or being transported Quality Inspector signature ____________________

Краткое содержание страницы № 3

Features of the SIB 16x40 Gyro binoculars 9. CUSTOMER SUPPORT • Stabilized image • Rigid construction Should you experience any difficulties with your Newcon • Weather proof OPTIK product, consult the enclosed manual. If the problem • Surveillance under any motion condition remains unresolved, contact our customer support department at • Alternative external power supply (416) 663-6963 or Toll free at 1-877-368-6666. Our operating hours are 9am-5pm, Monday - Friday, Standard

Краткое содержание страницы № 4

BEFORE USE CAREFULLY READ ALL THE INSTRUCTIONS! 8. WARRANTY FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANTY! NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 1. BRIEF DESCRIPTION months from the date of manufacturing. Should your Newcon SIB 16x40GR Gyro Stabilizing Binoculars is an ultimate product prove defective during this period, please bring

Краткое содержание страницы № 5

7. TROUBLESHOOTING 2. APPEARANCE OF THE DEVICE The stabilizing mode does not work. Check that the batteries are installed properly. Check the charge of the batteries. Replace if they are weak. Do not use old batteries with new ones. The image does not appear in focus. Bring the inspected object to the center of the image. Turning the eyepieces (8), adjust to achieve the clearest image on the screen. If the view still does not seem in focus, clean the lenses. They could be fogg

Краткое содержание страницы № 6

6. STORAGE AND MAINTENANCE INSTRUCTIONS. Warning! After transportation or keeping the device at temperature lower than –25 °C (–13 °F), the device must be warmed up to ambient temperature for at least 6 hours before operating. Precautions: SIB 16x40 GR is a sophisticated precision optical instrument equipped with electronics. Therefore, it should be handled with due care. • Keep your device away from direct sunlight, impacts, dust, moisture, and sudden changes of temperatures.

Краткое содержание страницы № 7

3. TECHNICAL CHARACTERISTICS 7. In no less than a minute, press lever 5 (fig. 1) in the arrow indicated direction in order to engage the stabilizing mode Magnification 16x and hold it in this position while observing. Angular field of view 3.4° Exit pupil diameter, mm 2.5 ATTENTION! It is not allowed to engage the stabilizing mode Minimum focus, m 30 of the device when the power supply control Interpupillary adjustment, mm: 58 – 72 indicator is not glowing, or in less than a

Краткое содержание страницы № 8

4. SUPPLIED ACCESSORIES 5.2. Preparing the Device for Operation with Image Stabilization SIB 16x40 Gyro is supplied in the following assembly: 1. Put the lens caps on the objective lenses. Take the power - Device 1 pc. supply unit in your left hand. - Objective lens caps 2 pc. 2. Pull out pin (3) on the power supply unit (fig. 2) and - Carrying case 1 pc. disconnect the power supply unit from the device with an - Neck strap 1 pc. easy movement towards you. - Hand strap