Краткое содержание страницы № 1
MINIDISC RECORDER
XM-G6
SAMPLING RATE CONVERTER
MINIDISC RECORDER XM-G6
REC PAUSE
REC
For Customer Use:
INSTRUCTIONS
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0378-002A
[B]
XM_cover[B] 1 99.11.22, 11:08
Краткое содержание страницы № 2
Warnings, Cautions and Others CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3 Bottom: Place on the level surface. Maintain
Краткое содержание страницы № 3
MPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1 CLASSIFICATION LABEL, PLACED ON REAR 2 WARNING LABEL, PLACED INSIDE THE UNIT ENCLOSURE DANGER: Invisible laser VARNING: Osynlig laser- radiation when open and strålning när denna del är interlock failed or defeated. öppnad och spärren är CLASS 1 AVOID DIRECT EXPOSURE urkopplad. Betrakta ej LASER PRODUCT TO BEAM. (e) strålen. (s) ADVARSEL: Usynlig laser- VARO: Avattaessa ja suo-
Краткое содержание страницы № 4
Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Welcome to XM-G6 Precautions XM-G6 is MiniDisc Recorder exclusively designed for UX- Installation G6R micro component system. Although you cannot operate • Install in a place which is level, dry and neither too hot this MD recorder without UX-G6R, t
Краткое содержание страницы № 5
Contents Introduction .......................................................... 1 Handling MDs ..................................................... 27 Welcome to XM-G6 ............................................................. 1 MD Handling Precautions .................................................. 27 Precautions ........................................................................... 1 Additional Information ...................................... 28 Contents ........................
Краткое содержание страницы № 6
Location of the Buttons and Controls Become familiar with the buttons and controls on the unit. XM-G6 MiniDisc Recorder 1 5 SAMPLING RATE CONVERTER 2 6 REC PAUSE 3 7 REC 4 AX-UXG6 Stereo Amplifier (belongs to UX-G6R) OPEN/CLOSE STANDBY/ON 1 MICRO COMPONENT SYSTEM UX-G6R 4 5 2 6 FM/AM AUX MULTI JOG VOLUME MOS - FET 3 7 ( ) Buttons behind the Sliding Panel When pressing OPEN/CLOSE button 4 DISPLAY PLAY REC TITLE CLOCK /CHARA. 4 ¢ SET CANCEL ENTER MODE MODE /EDIT /TIMER STANDBY/ON OPEN/CLOSE MICRO
Краткое содержание страницы № 7
Front Panels Remote Control (belongs to UX-G6R) MiniDisc Recorder XM-G6 1 MD IN lamp (7) * MD related operations are mainly assigned to 2 MD loading slot (7) the hollow buttons as illustrated bellow. 3 REC PAUSE button (12) 4 REC indicator (12) 50 (eject) button (8) REMOTE CONTROL RM-SUXG6R 66 (play/pause) button (8) PANEL OPEN/CLOSE DIMMER 77 (stop) button (8) ACTIVE CLOCK/TIMER SLEEP BASS EX. BASS TREBLE FM MODE PLAY MODE REPEAT AUTO PRESET PTY/EON TITTLE/EDIT ENTER DISPLAY /CHARA. CANCEL
Краткое содержание страницы № 8
Getting Started Unpacking When connecting the XM-G6 MD recorder Make sure to turn off UX-G6R and unplug the AC After unpacking, check to be sure that you have the power cord. Leave it until all the connections following items. complete. DO NOT place XM-G6 unit or any other • Optical digital cable (1) equipment onto AX-UXG6 stereo amplifier unit. • External wire (1) Damage or malfunction may result from heat generating portion of AX-UXG6. The number in the parentheses indicates the quantity of th
Краткое содержание страницы № 9
Connecting Another Digital Audio Equipment For digital audio recording onto an MD, XM-G6 unit connected to UX-G6R system has one more optical digital terminal (OPTICAL DIGITAL IN for AUX), prepared for an external digital audio output equipment. When connecting another digital equipment Make sure to turn off UX-G6R system with XM-G6 unit and unplug the AC power cord. Leave it until all the connection completes. XT-UXG6R DIGITAL OUT for XM-G6 DIGITAL IN for XT-UXG6R XM-G6 DIGITAL IN for AUX Prote
Краткое содержание страницы № 10
Playing Back an MD OPEN/CLOSE REMOTE CONTROL RM-SUXG6R PANEL OPEN/CLOSE STANDBY/ON OPEN/CLOSE DIMMER MICRO COMPONENT SYSTEM UX-G6R ACTIVE BASS EX. CLOCK/TIMER SLEEP MULTI JOG Play mode indicators BASS TREBLE FM MODE FM/AM AUX MULTI JOG VOLUME MOS - FET PLAY MODE PLAY MODE REPEAT AUTO PRESET PTY/EON TITTLE/EDIT ENTER REPEAT DISPLAY SET /CHARA. CANCEL DISPLAY PLAY REC TITLE CLOCK /CHARA. 4 ¢ SET CANCEL ENTER MODE MODE /EDIT /TIMER CANCEL UP UP/DOWN SET < > DOWN
< / > 4 ¢ CANCEL MD AUX
Краткое содержание страницы № 11
Continued Searching and Skipping Tracks If the MD or each track has a title The disc title and track titles will be shown at the lower portion of the display window (Title longer than While playing back an MD, you can do the following 11 characters scrolls to show the entire title). operations. To search and skip to a particular point in a track • DO NOT insert any foreign matters. During playback, press and hold 4 / ¢ button to meet the desired passages in a track: Press and hold ¢ button: 2 Pr
Краткое содержание страницы № 12
Continued Programing the Playing Order of the Tracks • If you try to program a 33rd step “MEMORY FULL” will appear in the display — Program Play window, and your entry is ignored. • The total playback time of programed tracks You can arrange the order in which the tracks play before exceeds 99’59” you start playing. You can program up to 32 tracks. “– – : – –” will appear in the display window. 1 Insert an MD. • If the current playing source is not the MD, press 6 Press 6 (play/pause) button on
Краткое содержание страницы № 13
Playing at Random — Random Play Repeating Tracks — Repeat Play The tracks of the loaded MD will play in no special order You can have the entire disc, the programed tracks, or the (at random) when you select this mode. individual track repeat as many times as you like. 1 Insert an MD. 1 Insert an MD. If the current playing source is not the MD, press 6 If the current playing source is not the MD, press 6 (play/pause) button on the MD recorder, then 7 (stop) (play/pause) button on the MD recorder
Краткое содержание страницы № 14
Recording onto an MD Things to Know Before You Start Recording • It should be noted that it may be unlawful to pre-recorded tapes, records, or discs without the consent of the owner of copy right in the sound or video recording, broadcast or cable program and in any literary, dramatic, or artistic embodied therein. • The sampling frequency rate converter built in the MD recorder allows you to record a digital source if its sampling frequency is 32 kHz, 44.1 kHz, or 48 kHz. If no source equipment
Краткое содержание страницы № 15
Continued OPEN/CLOSE REMOTE CONTROL RM-SUXG6R PANEL OPEN/CLOSE STANDBY/ON OPEN/CLOSE DIMMER MICRO COMPONENT SYSTEM UX-G6R ACTIVE CLOCK/TIMER SLEEP BASS EX. BASS TREBLE FM MODE FM/AM AUX MULTI JOG VOLUME MOS - FET FM/AM PLAY MODE REPEAT AUTO PRESET AUX PTY/EON TITTLE/EDIT ENTER DISPLAY/CHARA. DISPLAY SET /CHARA. CANCEL DISPLAY PLAY REC TITLE CLOCK 4 ¢ SET /CHARA. CANCEL ENTER MODE MODE /EDIT /TIMER CANCEL UP SET < > AUX DOWN
MD 6 MD AUX SET REC MODE (play/pause) TAPE CD FM/AM CD 6
Краткое содержание страницы № 16
Continued 5 Press 6 (play/pause) button on the MD recorder Track marking in Long Recording to start recording. Putting track marks manually while recording, you The REC indicator remains lit, and recording starts. can easily identify and edit desired portions of the broadcast program. • To stop recording temporarily, press REC PAUSE To put a track mark, press SET button as required button or 6 (play/pause) button on the MD recorder while recording and you can find out the current track or MD 6 (
Краткое содержание страницы № 17
Continued Recording a CD — Synchronized Recording Recording a CD This is the easiest way of CD recording. Setting the recording When recording a CD onto an MD, you can record the entire mode, you can start playing back an entire CD and recording CD or the particular tracks manually and using the it onto an MD simultaneously. synchronized recording. 1 Repeat the steps 1 and 2 in previous section. Recording a CD Manually 2 Press REC MODE button behind the sliding panel You can start recording an e
Краткое содержание страницы № 18
Continued • To stop recording temporarily, press REC PAUSE Recording a Tape button or 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control. When recording from TD-UXG6 cassette deck, you can • To resume recording, press 6 (play/pause) button select one of the two recording methods — Manual on the MD recorder or MD 6 (play/pause) button Recording (stereo) and Sound Synchronized Recording. on the remote control again. • Manual Recording — Sound is recorded in
Краткое содержание страницы № 19
Continued 4 Press ` (playback) button on the cassette deck or Synchronized recording an MD onto a tape TAPE ` (playback) button on the remote control. Once the cassette deck starts playback, the MD recorder 1 Insert an MD to be played-back into the loading slot, detects the audio signals and starts recording. and load a recordable tape. The MD IN lamp lights orange. Each time you press DISPLAY/CHARA. button, information switches between the remaining time for 2 Press 6 (play/pause) button on the
Краткое содержание страницы № 20
Continued Recording the External Equipment When recording from the external equipment, you can select one of the two recording methods — Manual Recording or and Sound Synchronized Recording. • Manual Recording — Sound is recorded in stereo (both on the left and right audio channels). You have to operate the MD recorder and the external equipment respectively. 5 Make the external equipment start playback in • Sound Synchronized Recording — With this method, you succession. can start recording whe
