Краткое содержание страницы № 1
English
H2-E.fm 1 ページ ２００７年７月１１日 水曜日 午後３時１９分
Operation Manual
© ZOOM Corporation
Reproduction of this manual, in whole or in part,
by any means, is prohibited.
Краткое содержание страницы № 2
H2-E.fm 2 ページ ２００７年７月１１日 水曜日 午後３時１９分 SAFETY PRECAUTIONS / Usage Precautions • High humidity or moisture • Excessive dust or sand SAFETY PRECAUTIONS • Excessive vibration or shock Handling In this manual, symbols are used to highlight warnings and •Never place objects filled with liquids, such as vases, on cautions for you to read so that accidents can be prevented. The Warning the H2 since this can cause electric shock. meanings of these symbols are as follo
Краткое содержание страницы № 3
H2-E.fm 3 ページ ２００７年７月１１日 水曜日 午後３時１９分 Contents SAFETY PRECAUTIONS / Convenient Recording Functions ........ 35 Usage Precautions ................................2 Selecting the recording mode ............ 35 Using the AGC/compressor/ What the H2 Can Do ................................5 limiter function .................................. 37 Attenuating the low frequencies ......... 38 Parts of the H2 .........................................8 Using the auto record function .......
Краткое содержание страницы № 4
H2-E.fm 4 ページ ２００７年７月１１日 水曜日 午後３時１９分 Contents Tuning an Instrument ............................ 63 Specifications......................................... 86 Using the chromatic tuner ...................63 Troubleshooting .....................................88 Using the dedicated guitar/ bass tuner ..........................................64 Error Messages ......................................89 Adjusting the reference pitch of the tuner .........................................
Краткое содержание страницы № 5
Краткое содержание страницы № 6
Краткое содержание страницы № 7
Краткое содержание страницы № 8
H2-E.fm 8 ページ ２００７年７月１１日 水曜日 午後３時１９分 Parts of the H2 Front panel [MIC ACTIVE] indicator * Flashes if the front-side mic signal is distorted. Display Mic pattern [PLAY/REC] indicator indicators (MIC PATTERN) (MIC PATTERN) key key (MENU) key (REW) key (FF) key (REC) key (PLAY/PAUSE) key Rear panel [MIC ACTIVE] indicator * Flashes if the rear-side mic signal is distorted. Battery compartment cover ZOOM H2 8
Краткое содержание страницы № 9
H2-E.fm 9 ページ ２００７年７月１１日 水曜日 午後３時１９分 Parts of the H2 Left side panel Right side panel [PHONES/LINE OUT] [EXT MIC IN] jack jack [MIC GAIN] VOLUME [+]/[-] keys switch [LINE IN] jack [POWER] switch [USB] port [DC 9V] jack Bottom panel [SD CARD] slot cover [SD CARD] slot Open Internal clock date/time setting The H2 has an internal clock that is used for time stamping of files created during recording. When you turn the H2 on for the first time, a message asking you to set the date/time appears.
Краткое содержание страницы № 10
H2-E.fm 10 ページ ２００７年７月１１日 水曜日 午後３時１９分 Getting Connected Make connections to other equipment such as microphones and audio components as shown below. To monitor the output of the H2 using a stereo To use an external microphone, system, connect a Y cable to the [PHONES/LINE connect the mic to the [EXT MIC IN] OUT] jack (stereo mini phone jack) and adjust the jack (stereo mini phone jack). Plug-in volume with the VOLUME [+]/[-] keys. power type microphones are also supported (p.80).
Краткое содержание страницы № 11
Краткое содержание страницы № 12
Краткое содержание страницы № 13
H2-E.fm 13 ページ ２００７年７月１１日 水曜日 午後３時１９分 Recording When the H2 starts up, the following screen is Power-on shown. Use the following procedure to turn the H2 on. 1. Insert a SD card into the H2. Verify that power to the H2 is off. Then insert the SD card into the [SD CARD] slot ( → p. 11). This is called the "top screen". From here, you can access the various functions of the H2. If Verify that a monitor system or headphones another screen is currently shown, press
Краткое содержание страницы № 14
Краткое содержание страницы № 15
H2-E.fm 15 ページ ２００７年７月１１日 水曜日 午後３時１９分 Recording degree angle), depending on the width of the Setting the input sensitivity sound source and the distance to it. For details and recording level on mic patterns, see page 21. When one of the above mic patterns is chosen, For best results, the input sensitivity and the the operation mode automatically becomes recording level must be set to appropriate values. stereo (2-channel). 1. Set the sensitivity of the built-in NOTE mics. When t
Краткое содержание страницы № 16
H2-E.fm 16 ページ ２００７年７月１１日 水曜日 午後３時１９分 Recording To adjust the recording level, use the 3 (REW)/2 (FF) keys. [MIC ACTIVE] indicator Flash H2 front panel 2. Set the H2 to the recording When you press either of these keys once, the standby condition and adjust the current recording level setting is shown on the recording level. display. Adjusting the recording level means adjusting Recording level setting the level of the signal as recorded on the SD card. To do this, verify that
Краткое содержание страницы № 17
H2-E.fm 17 ページ ２００７年７月１１日 水曜日 午後３時１９分 Recording Recording and playback Power-off The steps for recording and playback are as Use the following procedure to turn the H2 follows. off. 1. Set the H2 to the recording 1. Turn the volume of the monitor standby condition. system down. With the stereo mode top screen shown on the display, press the 5 (REC) key to set the H2 2. Turn power off in the order to recording standby. monitor system → H2. After verifying tha
Краткое содержание страницы № 18
H2-E.fm 18 ページ ２００７年７月１１日 水曜日 午後３時１９分 Stereo Mode Recording This section explains in detail how to record in stereo mode. About the stereo mode Indicator for selected mic pattern lights up In stereo mode, the signal from the built-in mics, an external mic, a CD player or other external component is recorded on two channels as a stereo signal. When the H2 is in (MIC PATTERN) keys stereo mode, the operation steps are as follows. ● Recording the signal from an external mic or an
Краткое содержание страницы № 19
Краткое содержание страницы № 20
