Краткое содержание страницы № 1
This product can be set up using
DFL-200
any current web browser, i.e.,
Network Security
Internet Explorer 6 or Netscape
Navigator 6.
Firewall
Before You Begin
If you purchased this Network Security Firewall to connect to your high-speed
Internet connection in a secure manner, you must have either an Ethernet-based
Cable or DSL modem with an established Internet account from an Internet
Service Provider (ISP).
Check Your Package Contents
DFL-200 Network Security Firewall
CD-ROM (containin
Краткое содержание страницы № 2
Connecting The DFL-200 Network Security Firewall To Your Network A. First, connect the power adapter to the receptor receptor receptor at the back panel of the DFL- at the back panel of the DFL- 200 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. 1. Power off your Cable or DSL modem; some devices may not have a on/off switch and will require you to unplug the power adapter. Now, the DFL-200 shoul
Краткое содержание страницы № 3
Restart your computer To obtain a new IP address from the DFL-200 you wll need to restart your computer. Make sure that the network adapter in your computer is confi gured properly fi rst. Instructions on how to confi gure the network adapter to obtain an IP address automatically from the DFL-200 can be found in the appendix. STATUS LED – will fl ash consistently to indicate that the DFL-200 is working properly. NETWORK LEDs – a solid light on POWER LED – a solid light the port indicates a
Краткое содержание страницы № 4
When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard The DFL-200 provides Web based confi guration. You can confi gure your DFL-200 through your Netscape Communicator or Internet Explorer browser in MS Windows, Macintosh or UNIX based platforms. Activate your browser. Then type the IP address of the DFL-200 into the Location (for Netscape) or Address (for IE) fi eld and press “Enter.” For example: http:
Краткое содержание страницы № 5
The Setup Wizard (continued) Welcome to the DFL-200 connection wizard! Here you can choose to either confi gure your fi rewall over HTTP or over Secure HTTP (HTTPS). Click on Connect to the unit via HTTPS instead to use Secure HTTP Click NEXT to keep using HTTP. Step 1 - Set admin password Enter Enter Enter the password the password that you want to use for the admin account. Click NEXT Step 2 - Set timezone Select the appropriate timezone Enter Enter Enter the appropriate the appropria
Краткое содержание страницы № 6
The Setup Wizard (continued) Step 3 - Confi gure WAN interface Select the appropriate confi guration for the WAN interface, if you are unsure of which setting to select, please contact your Internet Service Provider. Click Next and continue to step 4 further down. If you are unsure of which setting to select, please contact your Internet Service Provider Click Next 6
Краткое содержание страницы № 7
The Setup Wizard (continued) Step 3 - Static IP If you selected Static IP you have to fi ll out the IP address information provided to you by your ISP. You will need to complete all the required fi elds except for Secondary DNS Server. You should probably not use the numbers displayed in these fi elds, they are only used as an example. Click Next and continue to step 4 further down. Click Next Step 3 - PPPoE If you selected PPPoE (Point- to-Point Protocol over Ethernet) you will have to
Краткое содержание страницы № 8
The Setup Wizard (continued) Step 3 - PPTP If you selected PPTP you will need to specify both PPTP tunnel parameters and Physical interface parameters. PPTP tunnel parameters: Enter the Username, Password and the PPTP Server IP address provided by your ISP. Physical interface parameters: DHCP If your Internet Service Provider is using DHCP you should select the DHCP radio button. Static IP If your Internet Service Provider is using Static IP you should select the Static IP radio button
Краткое содержание страницы № 9
The Setup Wizard (continued) Step 3 - Big Pond If you selected Big Pond you will have to fi ll out the user name and password provided to you by your ISP. Click Next and continue to step 4 further down. Click Next 9
Краткое содержание страницы № 10
The Setup Wizard (continued) Step 4 - Set up built-in DHCP server If you want to use the built-in DHCP Server in the DFL-200, choose Enable DHCP Server in this screen. You then need to specify a range of IP addresses to hand out to the DHCP clients. 192.168.1.100-192.168.1.200 192.168.1.100-192.168.1.200 192.168.1.100-192.168.1.200 This range is entered in the format “Start IP – Stop IP” i.e. 192.168.1.100 – 192.168.1.200. If you don’t want to use the built- in DHCP Server or confi gure
Краткое содержание страницы № 11
The Setup Wizard (continued) Setup Wizard Complete Click Restart to complete your confi guration. Click Restart 11
Краткое содержание страницы № 12
APPENDIX To connect to the network, make sure the network adapter in your computer is confi gured properly. Here’s how to confi gure the network adapter to obtain an IP address automatically from the DFL-200 Network Security Firewall. For Microsoft Windows XP: right click on My Network Places icon on the desktop > select Properties > Double-click on the Network Connection associated with the Ethernet adapter (i.e., D-Link DFE-530TX+). Click Internet Protocol (TCP/IP) Click Properties Select
Краткое содержание страницы № 13
For Apple Macintosh OS X: Go to the Apple Menu Click on Network and Select System Preferences Click on Network Select Built-in Ethernet in the show pull down menu Select Using DHCP in the Confi gure pull down menu Click on Apply Now The IP address information, the Subnet Mask, the DFL-200 IP address and the Ethernet adapter address will appear 13
Краткое содержание страницы № 14
Technical Support You can fi nd software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone: (877) 453-5465 6am-6pm PST, Mon-Fri. D-Link Technic
