Руководство по эксплуатации Altinex Wall Mount Interface with Twisted Pair (TP) Output DS801-201

Краткое содержание страницы № 1

SPECIAL APPLICATION
The DS801-202 is shown above.
MANUAL PART NUMBER: 400-0447-003
DS801-201/202
WALL-MOUNT INTERFACE
WITH TWISTED PAIR (TP) OUTPUT
USER’S GUIDE

Краткое содержание страницы № 2

SPECIAL APPLICATION TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL..........................................................2 INSTALLATION .................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR DS801-201/202............................... 3 TECHNICAL SPECIFICATIONS ............................ 3 DESCRIPTION OF DS801-201/202 ..

Краткое содержание страницы № 3

SPECIAL APPLICATION PRECAUTIONS / SAFETY WARNINGS 1 • This equipment has been tested and found to comply with the limits for a Class A digital device Please read this manual carefully before using your pursuant to Part 15 of the FCC Rules. These DS801-201/202. Keep this manual handy for future limits are designed to provide reasonable reference. These safety instructions are to ensure protection against harmful interference when the the long life of your DS801-201/202 and to prevent equ

Краткое содержание страницы № 4

SPECIAL APPLICATION ABOUT YOUR DS801-201/202 2 TECHNICAL SPECIFICATIONS 3 DS801-201/202 FEATURES/ WALL MOUNT VIDEO + AUDIO TO DS801-201/202 DESCRIPTION TWISTED PAIR (UTP) TRANSMITTER GENERAL The DS801-201/202 provides a means of Inputs transmitting computer video and audio signals over Twisted Pair-type (CAT-5/6) cable when used RGBHV/YPbPr 15-pin HD female together with an ALTINEX UTP receiver, such as Stereo Audio 3.5mm female the DS801-111. Video equalization allows for Power 2-pin termi

Краткое содержание страницы № 5

SPECIAL APPLICATION MECHANICAL DS801-201/202 ELECTRICAL DS801-201/202 DS801-201 Inside Wall Dimensions Input Height 2.60 in (66 mm) Video Analog Signal 1.0 Vp-p max. Width 3.52 in (90 mm) Video Sync Level TTL Depth 1.28 in (33 mm) Audio Signal Level 1.0 Vp-p max. DS801-202 Inside Wall Dimensions Output ALTINEX – UTP Standard Height 2.60 in (66 mm) Video+ Stereo Audio for Width 5.40 in (137 mm) TP Series Depth** 1.28 in (33 mm) Power Front Panel (wall surface)* 9 VDC 3.6 Watts Width - DS801-2

Краткое содержание страницы № 6

SPECIAL APPLICATION DESCRIPTION OF DS801-201/202 4 DS801-201 DESCRIPTION POWER SIGNAL FRONT VIEW AUDIO INPUT VIDEO INPUT EQUALIZATION LOCAL VIDEO OUTPUT LOCAL AUDIO OUTPUT BACK VIEW 4 TP OUTPUT OUTPUT POWER 400-0447-003 5

Краткое содержание страницы № 7

SPECIAL APPLICATION DS801-202 DESCRIPTION POWER SIGNAL FRONT VIEW AUDIO INPUT VIDEO INPUT EQUALIZATION LOCAL VIDEO OUTPUT LOCAL AUDIO OUTPUT BACK VIEW 4 TP OUTPUT OUTPUT POWER 400-0447-003 6

Краткое содержание страницы № 8

SPECIAL APPLICATION APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP DS801-201 or DS801-202 INSIDE WALL PORTION FITS STANDARD OUTLET BOX OPENINGS DS801-201 = 2-GANG and DS801-202 = 3-GANG CAT5 OUTPUT COMPUTER/COMPONENT VIDEO AND AUDIO INPUT LOCAL COMPUTER/COMPONENT VIDEO AND AUDIO OUTPUT LOCAL COMPUTER LOCAL MONITOR AND SPEAKERS 400-0447-003 7

Краткое содержание страницы № 9

SPECIAL APPLICATION DIAGRAM 2: INTERNAL VIEW INPUT OUTPUT R LOCAL G MONITOR B OUTPUT 15-PIN HD H V R PAIR3 G PAIR2 4 - TP OUT COMPUTER/ RJ-45 COMPONENT PAIR1 B VIDEO PLUG AND PLAY 15-PIN HD PAIR4 H/W V SYNC EQ PROCESSING H SIGNAL DETECT MONO L LOCAL AUDIO STEREO STEREO OSC MODULATION AUDIO 3.5mm R LOCAL L STEREO AUDIO R 3.5mm POWER + POWER 9VDC, 0.5A SUPPLY GND 2-PIN TB 400-0447-003 8

Краткое содержание страницы № 10

SPECIAL APPLICATION INSTALLING YOUR DS801-201/202 6 OPERATION 7 Step 1. Determine the best location for the The DS801-201/202 requires no adjustments for normal operation. Once connected and the DS801-201/202 and TP Receiver. Where equalization set, the DS801-201/202 will work possible, locate the DS801-201/202 as trouble-free with no user intervention. Depending close to the video source as possible and the receiver as close to the receiving on the TP receiver, cable lengths between unit

Краткое содержание страницы № 11

SPECIAL APPLICATION Cause 5: The display has a problem. ALTINEX POLICIES 9 Solution: Make sure the display has power 9.1 LIMITED WARRANTY/RETURN POLICIES and is turned on. If there is still no Please see the ALTINEX website at display, please call ALTINEX at www.altinex.com for details on warranty and (714) 990-2300. return policies. 8.2 NO SOUND 9.2 CONTACT INFORMATION Cause 1: The source has a problem. ALTINEX, Inc. Solution: Check the source and make sure 592 Apollo Street that ther