Руководство по эксплуатации M-Systems Flash Disk Pioneers DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter

Краткое содержание страницы № 1

User Manual
DiskOnChip 9x12 BGA-to-32-Pin
DIP Adapter
SEPTEMBER 2002
93-SR-002-26-6L

Краткое содержание страницы № 2

DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter Table of Contents 1 General........................................................................................................................................ 3 1.1 Supported DiskOnChip Devices........................................................................................... 3 1.2 Supported DiskOnChip Accessories .................................................................................... 3 2 Using the DiskOnChip 9x12 BGA-to-3

Краткое содержание страницы № 3

DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter 1 General The DiskOnChip 9x12 BGA-to-32-pin DIP adapter enables developers to evaluate M-Systems’ DiskOnChip BGA 9x12 devices with any M-Systems evaluation board that contains a 32-pin or 40-pin DIP socket. 1.1 Supported DiskOnChip Devices The DiskOnChip 9x12 BGA-to-32-pin DIP adapter supports DiskOnChip Millennium Plus 9x12 mm BGA in 16MB, 32MB and 64MB capacities, and Mobile DiskOnChip Plus in 16MB, 32MB and 64MB capacities. See Section 3.1 fo

Краткое содержание страницы № 4

DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter 2 Using the DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter 2.1 Jumper Settings The adapter contains the following four jumpers: • J1: Not used, and should be left open. • J2: Used for the device LOCK# pin. The default setting is open and leaves the LOCK# pin negated. • JP1 and JP2: Used for matching the host voltage supplied by the EVB or the GANG Programmer, either 3.3V or 5V. Also used for setting the VCCQ for DiskOnChip. See Table 1 for the corr

Краткое содержание страницы № 5

DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter 2.3 Inserting DiskOnChip into the Adapter To insert a DiskOnChip 9x12 BGA device into the adapter: 1. Identify the alignment ball (A) of DiskOnChip, at location C1 in the ball diagram. Refer to the relevant data sheet for more information on the ball diagram. 2. Place DiskOnChip in the socket so that the alignment ball faces the white line on the PCB. See Figure 1 for the location of the white alignment line. 3 Ordering Information 3.1 DiskOnCh

Краткое содержание страницы № 6

DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter How to Contact Us Website: http://www.m-sys.com General Information: info@m-sys.com Technical Information: techsupport@m-sys.com USA China M-Systems China Ltd. M-Systems Inc. 8371 Central Ave, Suite A 25A International Business Commercial Bldg. Nanhu Rd., Lou Hu District Newark CA 94560 Shenzhen, China 518001 Phone: +1-510-494-2090 Phone: +86-755-2519-4732 Fax: +1-510-494-5545 Fax: +86-755-2519-4729 Taiwan Europe and Israel M-Systems A