Краткое содержание страницы № 1
SMART
BLUETOOTH
HEADSET
User Guide
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Contents Introduction 6 Charge Your Q2 7 Switching the Q2 On and Off 7 Pair the Q2 with your Phone 8 Transfer your Phonebook 8 Wearing Your Q2 10 Changing the Ear Bud 10 Stabilizing Ear Buds 10 Use Your Voice to Control the Q2 11 Use Your Voice to Make Phone Calls 12 Use Your Voice to Answer Calls 12 Use Your Voice to Access the World 13 List of Voice Commands 14 3 ENGLISH
Краткое содержание страницы № 4
Transferring your Phonebook Contacts to the Q2 16 Automatically Transferring your Phonebook Contacts to the Q2 16 Manually Transferring your Phonebook Contacts to the Q2 16 Updating your Phonebook Contacts on the Q2 17 Listening to Audio 18 Reconnecting to the Q2 18 Using 2 Phones with the Q2 (Multipoint) 19 Which Phone is Used for Calls? 19 Multiple Calls (Call Waiting)* 20 Firmware Upgrades 21 Function Reference 21 Phone Specifi c Tips and Tricks 24 Android 24 ® ® Apple iPhone 24
Краткое содержание страницы № 5
BlackBerry 25 Other Models 25 Troubleshooting 26 Resetting the Q2 31 Specifi cations 32 Help and Support 32 Terms and Conditions 33 5 ENGLISH
Краткое содержание страницы № 6
Multi-Function Introduction Button (MFB) Welcome to the BlueAnt Q2: the voice controlled smart Microphones Bluetooth headset for smartphone users. With the Q2 you can make outgoing calls and answer incoming calls using just your voice, and you will always know who is calling without looking at your phone because the Q2 will read out the caller’s name or number. Vol - Read on and learn how to use the Q2 to listen to Vol + Indicator Light turn-by-turn GPS directions, play music, and access
Краткое содержание страницы № 7
Charge Your Q2 Your Q2 has been given an initial partial charge to get you started, but for best results we recommend you fully charge it using the supplied USB cable and adaptor. > You should charge the Q2 whenever it announces that the battery is Very Low. > A full charge takes about 3-4 hours. > During charging, the indicator light fl ashes red. > When the light goes white, the charge is complete. Charging port Switching the Q2 On and Off There is a hardware power switch next to the charging
Краткое содержание страницы № 8
Pair the Q2 with your Phone To use the Q2 you need to pair it with your phone. 1. Slide the hardware power switch across to turn the Q2 on and then put the Q2 in your ear. 2. If this is the fi rst time you have used the Q2 it will go straight to pairing mode. The voice prompts will start to talk you through the pairing process. For subsequent pairings, click the MFB and wait for the Q2 to ask you to Say A Command. Then say Pair Me. 3. Follow the voice prompts to pair the Q2 with your phone. The
Краткое содержание страницы № 9
® BlackBerry Accept connection request from BlueAnt Q2? If you are using a BlackBerry smartphone you may see a message YES like this one. NO Select “Don’t ask this again” so that a tick appears in the box, and then choose “YES”. Don’t ask this again ™ Android Phonebook Access Request On Android devices a message about the phonebook transfer may appear in the notifi cations area at the top of the screen. Notifi cation In order to transfer your contacts you must swipe your fi nger over this
Краткое содержание страницы № 10
Wearing Your Q2 You can wear your Q2 in either ear. For best results: > Rotate the ear gel as shown here. > Make sure that the headset is angled towards LEFT RIGHT your mouth. EAR EAR Changing the Ear Bud Your Q2 is supplied with a choice of ear buds in different sizes so that you can choose the one that fi ts best. If you want to change the ear bud, remove the attached one by gently lifting it away from the Q2. Gently press the replacement ear bud onto the Q2 and push it fi rmly to secure i
Краткое содержание страницы № 11
Use Your Voice to Control the Q2 The Q2 is voice controlled. Simply click the MFB and wait for the Q2 to ask you to Say A Command. Then immediately say one of the voice commands loudly and clearly. 1 2 3 Phone Commands Say A Command 11 ENGLISH
Краткое содержание страницы № 12
Use Your Voice to Make Phone Calls Click the MFB and wait for the Q2 to ask you to Say A Command, then: > Say Phone Commands to activate the voice dial feature on your phone (if your phone supports voice dialing). > Say Redial to redial the last number you called on your phone. > Say Call Back to call back the last call you received on the Q2. Use Your Voice to Answer Calls When the phone rings, wait for the prompt to ask you if you want to take the call, and then say Answer or Ignore. Or: > T
Краткое содержание страницы № 13
Use Your Voice to Access the World Your Q2 provides you with voice access to the world by giving you stock quotes, news, sports updates, traffi c information, weather, and more. To access this function: 1. Click the MFB and wait for the Q2 to ask you to Say A Command. 2. Say Favorites and wait for the Q2 to ask you Which Favorite? 3. Say one of the following commands: Information Movies Navigate News Sports Stock Quotes Traffi c Weather Note: The availability o
Краткое содержание страницы № 14
List of Voice Commands When you want to do something, just click the MFB, wait for the Q2 to ask you to Say A Command, and then say one of the following commands: > Am I Connected? — The Q2 will check if your phone is connected, and attempt to connect if it is not. > Call Back — Calls back the last incoming call received on the Q2. > Check Battery — Tells you the battery level on the Q2. > Favorites — Wait for the Q2 to ask you Which Favorite? then say one of the following: Information
Краткое содержание страницы № 15
> Redial — Redials the last outgoing call made on the connected phone. > Sensitivity Level — Confi gures the sensitivity of the Q2’s voice recognition. > LED Light — Turns the LEDs on or off. When the LEDs are set to off, they still light up when you turn the Q2 on or off, but will not fl ash at other times. > Update Phonebook — Updates your phonebook contacts on the Q2. If you add contacts to your phone, or change the numbers associated with existing contacts, then you will need to use this co
Краткое содержание страницы № 16
Transferring your Phonebook Contacts to the Q2 Your Q2 uses Text to Speech technology (TTS) to read out the name of the person who is calling you. To do this, the Q2 needs to store a copy of your phonebook contacts. Automatically Transferring your Phonebook Contacts to the Q2 When you pair your phone with the Q2 it will attempt to transfer the phonebook contacts automatically. The Q2 stores up to 2,000 contacts per phone. Tip: If you want to cancel the phonebook transfer, click the MFB. Manu
Краткое содержание страницы № 17
3. Select the option on your phone to “send” or “beam” contacts, business cards, or v-cards via Bluetooth, and select the Q2 from the list of Bluetooth devices. See your phone’s manual for help with this step. Note: some phones do not support phonebook transfers at all. If this is the case, the Q2 will read out the caller’s number instead (providing your phone and carrier support caller ID). Updating your Phonebook Contacts on the Q2 If you add or change entries in your phonebook then you nee
Краткое содержание страницы № 18
Listening to Audio The Q2 supports A2DP audio streaming. If your phone supports the A2DP profi le then simply start playing music or any other audio (including turn-by-turn directions from a GPS application on your phone) and it will automatically transfer to the Q2. If the phone rings the audio will mute. You can use your voice to answer or ignore the call. Or: > Click the MFB to accept the call. > Double click the MFB to ignore the call. The audio will resume when the call ends. If you want
Краткое содержание страницы № 19
Alternatively, use the hardware switch to turn the Q2 off whenever you are not using it. The Q2 will automatically reconnect to your phone if the phone is in range when you switch the Q2 on. Depending on your phone, this may take a few seconds. Please ensure that Bluetooth is enabled on your phone. Using 2 Phones with the Q2 (Multipoint) Up to 2 devices can connect to the Q2 at the same time. If either phone rings, you can answer it with the Q2. Use the Pair Me command to put your Q2 back in
Краткое содержание страницы № 20
Note: Only the primary phone can play music through the Q2 via A2DP. Multiple Calls (Call Waiting)* If you receive an incoming call while you are already on a call the Q2 will play a tone to alert you. > Hold Vol + for about 1 second to put your current call on hold and answer the incoming call. > Hold Vol - for about 1 second to end the current call and answer the incoming call. > Once you have a call on hold, you can switch between calls by holding Vol + for about 1 second. Note: If one of t
