Краткое содержание страницы № 13
Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuration. 13
Краткое содержание страницы № 14
3. Web Configuration Management Determine your connection settings Before you configure the router, you need to know the connection information supplied by your ADSL service provider. Connecting the ADSL Router to your network Unlike a simple hub or switch, the setup of the ADSL Router consists of more than simply plugging everything together. Because the Router acts as a DHCP server, you will have to set some values within the Router, and also configure your networked PCs to accept the I
Краткое содержание страницы № 15
Once you have powered on ADE-3410, system will boot up and connect to DSLAM automatically. In login dialog, enter “admin” as user name and “admin” as default password. After log in, you will see the following page. The default screen is Wizard setting screen. You can configure the device step by step. 3.1 ADSL Router Status The Status screen display system information of your Router. It includes the System, LAN, WAN, Port Mapping, Statistic and ARP Table. You can see the information of
Краткое содержание страницы № 16
3.1.2 LAN Status You can see the LAN IP address, Mask, DHCP status, MAC and DHCP Client Table in this screen. 3.1.3 WAN Status You can see the VPI/VCI, Encapsulation type, Protocol, WAN IP address, Gateway and DNS information in this screen. 16
Краткое содержание страницы № 17
3.1.4 Port Mapping You can see the Port Mapping information in this screen. It includes the status and Mapping Relation. 3.1.5 Statistic You can see the Statistic information in this screen. It includes the Traffic and DSL statistic. Traffic Statistic Screen The screen shows the statistic of LAN, WLAN and WAN Port. Click the Refresh button to refresh the information. 17
Краткое содержание страницы № 18
DSL Statistic The screen shows the ADSL line statistic. 3.1.6 ARP Table You can see the ARP information in this screen. Click the Refresh button to refresh the information. 18
Краткое содержание страницы № 19
3.2 Wizard You can use "Wizard" to setup the router as follows, and the router will connect to the Internet via ADSL line. Step 1. Click "Wizard" to get into the quick setup procedures. It will show the below screen. Enter the VPI / VCI value that provided by your ISP. Step 2. Click "Next" to select your WAN Connection Type. You can have this information from your Internet Service Provider. 19
Краткое содержание страницы № 20
Step 3. Click "Next" to setup to select the WAN IP type, and the WAN IP setting is provided by your ISP. Step 4. Enter the user name and password that your ISP has provided to you. Select the connection type that you want to use. There are three types for your selection – Continuous, Connect on Demand and Manual. 20
Краткое содержание страницы № 1
ADSL 2/2+ Router with USB
Port
ADE-3410
User's Manual
1
Краткое содержание страницы № 2
Copyright Copyright © 2008 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET. PLANET makes no representations or warranties, either expressed or implied, with respect to the contents her
Краткое содержание страницы № 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two conditions: (1) This device may not cause harmful interference, and (2) this Device must accept any interference received, including interference that may cause undesired operation. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FC
Краткое содержание страницы № 4
Table of Contents 1. Introduction......................................................................................................................6 1.1 Feature ....................................................................................................................6 1.2 Package Contents....................................................................................................7 1.3 Physical Details.......................................................................
Краткое содержание страницы № 5
3.5.3.2 DMZ .....................................................................................................38 3.5.4 Routing .........................................................................................................38 3.5.4.1 RIP.......................................................................................................38 3.5.4.2 Static Route .........................................................................................39 3.5.5 IP QoS ...............
Краткое содержание страницы № 6
1. Introduction The PLANET ADSL 2/2+ Router, ADE-3410, provides office and residential users the ideal solution for sharing a high-speed ADSL 2/2+ broadband Internet connection on one Ethernet port and one USB port. It can support downstream transmission rates of up to 24Mbps and upstream transmission rates of up to 3.5Mbps. The product supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), PPP over Ethernet (RFC 2516), and RFC 1483 encapsulation over ATM (MER, bridged or routed) to
Краткое содержание страницы № 7
Dynamic DNS Support DDNS, when used with the Virtual Servers feature, allows users to connect to Servers on your LAN using a Domain Name, even if you have a dynamic IP address which changes every time you connect. VPN Pass through Support PCs with VPN (Virtual Private Networking) software using PPTP, L2TP, and IPSec are transparently supported - no configuration is required. RIP Routing It supports RIPv1/2 routing protocol for routing capability. Simple Network Management Protocol (SN
Краткое содержание страницы № 8
Front Panel LED definition LED Meaning Lit when power is ON. 1 PWR Lit when DSL line is connected. Blink when DSL line is 2 Link training. 3 Data Blink when DSL data is transferring. Lit when connected to an Ethernet device. Blink when data is 4 LAN Transmitted / Received. Lit when the USB port is connected to the PC and working 5 USB properly. Rear Panel Rear Panel Port and Button Definition Port Meaning Connect the supplied RJ-11 (“telephone”) cable to this port
Краткое содержание страницы № 9
2. Installation This chapter offers information about installing your router. If you are not familiar with the hardware or software parameters presented here, please consult your service provider for the values needed. 2.1 System Requirement 1. Personal computer (PC) 2. Pentium III 266 MHz processor or higher 3. 128 MB RAM minimum 4. 20 MB of free disk space minimum 5. RJ45 Ethernet Port 2.2 Hardware Installation Please connect the device to you computer as follow: If connecting
Краткое содержание страницы № 10
If do not need to connect to the splitter, Connect the modem to wall jack with a RJ-11 cable. Use Ethernet cable to connect “LAN” port of the modem and network adaptor of your computer. 2.3 Configuring the Network Properties Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Interne
Краткое содержание страницы № 11
5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 11
Краткое содержание страницы № 12
3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 12
