Руководство по эксплуатации Delta 4540 Series

Краткое содержание страницы № 1

53907 53907 53907 53907 53907 53907
N
N
O
O
SILICONE
TWO HANDLE MINI-WIDESPREAD
LAVATORY FAUCETS
LLAVES DE LAVAMANOS DE DOS MANIJAS
DE MINI-EXTENSIÓN
U
P
C
®
®
ROBINETS DE STYLE “À ENTRAXE LONG” À
ASME A112.18.1 / CSA B125.1
NSF-61 DEUX POIGNÉES POUR LAVABO STANDARD
ICC/ANSI A117.1
Models/Modelos/Modèles
4540 & 4578 Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted pu

Краткое содержание страницы № 2

CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. LIFETIME FAUCET AND FINISH LIMITED WARRANTY ® All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to purchaser must be made available to Delta for all warranty claims. THIS be free from defects in material & workmanshi

Краткое содержание страницы № 3

H240 (Available After May 1, 2006) Model / Modelo / Modèle 4540 RP42581 Lift Rod Finial Pomo de la barra de alzar Grain de la Tirette RP47948 Set Screw Tornillo de Ajuste RP41588 Vis de Calage Lift Rod Barra de Alzar Tige de Manoeuvre RP41896 Glide Ring Aro para Deslizar L’anneau de Glissement RP53344 RP47188 Aerator Stem Extender RP26148 Aireador Extensión para la espiga Bonnet Nuts Aérateur Rallonge de tige Bonetes/Capuchones Chapeaux filetés RP24097 1/4 Turn Stop H240 (Available Un

Краткое содержание страницы № 4

Model / Modelo / Modèle 4578 RP47227 RP41574 Spout Assembly Lift Rod Finial Ensamble del Tubo de Salida Pomo de la barra de alzar Bec Grain de la Tirette RP41588 Lift Rod Barra de Alzar Tige de Manoeuvre RP53347 RP26148 Aerator Bonnet Nuts Aireador Bonetes/Capuchones Aérateur Chapeaux filetés RP24097 1/4 Turn Stop Parada (Tope) a un 1/4 de Rotación Butée 1/4 de tour RP25513 Stem Unit Assembly RP42589 Ensamble de la Unidad del Vástago Base w/Gasket Obturateurs Base con Empaque Embase avec jo

Краткое содержание страницы № 5

T FRONT A. B. 1 3 FRONT 2 5 1 2 1 4 3 2 D. C. FRONT 5 4 1 3 1 2 1 Insert body (1) through sink and snap into place using plastic Remove "umbrella" (1) and be sure snap rings seat in bases (2). A. C. "umbrella" (2). NOTE: The front of the valve is labeled (3). Install gasket (3), base (4), and spout (5). Install gasket (1), base (2), and snap ring (3) over each end Hand tighten two outside nuts (1) and tighten spout nut (2) with basin B. D. valve (4). Be sure snap ring is fully seated in groove (

Краткое содержание страницы № 6

E. 2 1 2 5 6 1/2" (12.7mm) IPS 1 3/32" (2.38mm) 3 3 4 1 2 Choose hook-ups for 1/2" I.P.S. connections: To install the handles (1): be sure glide ring (2) is properly E. seated in bottom of handle before installing. Thread stem (1) Ball nose riser (3/8" O.D. copper tubing), or extender (3) into valve stem (4). Place handle base (1) over (2) 1/2" I.P.S. faucet connector stem extender and secure with set screw (5). Thread handle Use the enclosed coupling nuts (3) with the ball nose risers (1). blad

Краткое содержание страницы № 7

D. A. B. C. E. 3 1 1 2 3 2 3 1 2 1 1 2 2 F. G. 4 5 H. 3 2 4 1 5 1 2 3 2 1 6 Apply silicone to underside of flange (1). Insert Remove pivot nut (1). Install horizontal rod Remove stopper (1) and flange (2). D. G. A. body (2) into sink. Screw flange (1) into body (2). (2) and stopper (3) as removable (4) or non-removable (5). Hand tighten pivot nut (1). Screw nut (1) all the way down. B. Pivot (1) must face faucet. Pull assembly (2) Push washer (2) and gasket (3) down. E. down firmly and hold in

Краткое содержание страницы № 8

1 2 2 4 4 4 3 2 3 1 2 3 1 Remove aerator (1) and turn faucet handles (2) all the way on. Maintenance Turn on hot and cold water supplies (3) and flush water lines If faucet leaks from spout outlet–Shut off water supplies– for one minute. Replace Seats and Springs (1).* Important: This flushes away any debris that could cause damage to internal parts. If leak persists–Shut off water supplies–Replace Stem Unit Assembly (2).* Check all connections at arrows for leaks. Re-tighten if necessary, but