Руководство по эксплуатации Antec TRUEPOWER QUATTRO TPQ-1200

Краткое содержание страницы № 1

TRUEPOWER QUATTRO 1200-WATT
POWER SUPPLY








USER’S MANUAL

Краткое содержание страницы № 2

USER’S MANUAL TRUEPOWER QUATTRO SERIES TPQ-1200 POWER SUPPLY HIGH-PERFORMANCE POWER SUPPLY The TPQ-1200 goes beyond the kilowatt range of standard power supply units (PSUs) to power the largest servers and video workstations. It includes six rails of +12V output to deliver safe and reliable power to your system, and enough power and cables available to run three or more separate high-end graphics cards simultaneously. STANDARDS AND FEATURES The TruePower Quattro series is compatible

Краткое содержание страницы № 3

Source: 80 PLUS Verification and Testing Report NVIDIA™ SLI™-READY CERTIFICATION Antec’s TruePower Quattro power supplies are NVIDIA™ SLI™-Ready certified for use with multiple high-end graphics cards for superior parallel graphics processing. ADVANCED HYBRID CABLE MANAGEMENT SYSTEM The TPQ-1200 uses Advanced Hybrid Cable Management. Cables that are important or mandatory are connected directly to the PSU. There are also modular connectors on the back of t

Краткое содержание страницы № 4

Table 1 +12V Direct Cabling Connectors Rail 24-pin main connector 3 8-pin (4 + 4) ATX12V, EPS 2 8-pin EPS12V 2 PCI-E w/ blue stripe 3 PCI-E w/ green stripe 4 Molex cable from PSU 1 SATA cable from PSU 1 POWER OUTPUT The TPQ-1200 distributes a varying maximum number of amps on each rail. To see the output capacity and regulation for each different voltage, see Table 2. TABLE 2 Voltage Min. Load Max. Load Regulation Ripple & Noise +3,3V 0A 25A -3% ~ +5% <50 mV +5V 0A 30A

Краткое содержание страницы № 5

TABLE 3 Cable Connector Part Name Description Quantity Motherboard 24-pin (20+4) 8-pin EPS12V 8-pin (4+4) ATX12V, EPS Power Supply N/A Direct Cabling 2 x 8-pin (6+2) PCI-E 3 x Molex + 1 x Floppy 3 x SATA Molex connector and Floppy Includes three 1 x 3 [Floppy img] x1 connector w/ Molex connectors and one Floppy connector cable Molex connectors 1 Includes three Molex connectors x 3 w/ cable Serial ATA x 3 2 co

Краткое содержание страницы № 6

INSTALLATION: 1. Install the TPQ-1200 PSU into your case with the four screws provided. 2. Connect the 24-pin main power connector to your motherboard. 3. Connect the 8-pin or 4-pin ATX12V connector for the CPU to the appropriate connector on your motherboard. If your motherboard has an 8-pin socket with a cover on some of the openings, we recommend that you remove the cover and use the 8-pin connector. Note: Please also refer to your motherboard use

Краткое содержание страницы № 7

5. Connect the AC power cord to the power supply AC inlet. Please be sure to use the heavy-duty cord supplied with your TPQ-1200.

Краткое содержание страницы № 8

Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 A Rotterdam Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Technical Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2009 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Repro