Краткое содержание страницы № 1
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP-X4100E
Краткое содержание страницы № 2
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does
Краткое содержание страницы № 4
IMPORTANT SAFETY INSTRUCTIONS 7. Cleaning 10. Lightning Unplug this product from the wall outlet before For added protection for this product during cleaning. Do not use liquid cleaners or aerosol storm, or when it is left unattended and unused cleaners. Use a damp cloth for cleaning. for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. 8. Power-Cord Protection 11. Object and Liquid Entry Power-supply cords shou
Краткое содержание страницы № 5
IMPORTANT SAFETY INSTRUCTIONS 13. Stack Inhibited 16. Damage Requiring Service Do not stack other equipment on this product or Unplug this product from the wall outlet and refer do not place this product on the other equipment. servicing to qualified service personnel under the Top and bottom plates of this product develops following conditions: heat and may give some undesirable damage to a) When the power-supply cord or plug is other unit. damaged. b) If liquid has been spilled, or objects hav
Краткое содержание страницы № 6
IMPORTANT SAFETY INSTRUCTIONS 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only should be made by users.) 20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
Краткое содержание страницы № 7
CONNECTING AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector with a peripheral equipment before
Краткое содержание страницы № 8
TABLE OF CONTENTS FEATURES AND DESIGN..............9 COMPUTER MODE........................24 SELECTING INPUT SOURCE ..............................24 SELECTING COMPUTER SYSTEM .....................24 PREPARATION...............................10 PC ADJUSTMENT.................................................25 NAME OF EACH PART OF PROJECTOR............10 AUTO PC ADJUSTMENT ...................................................25 SETTING-UP PROJECTOR ..................................11 MANUAL PC ADJUS
Краткое содержание страницы № 9
FEATURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compact Design ◆ Digital Zoom (for Computer) This projector is extremely compact in size and weight. Digital Zoom function adjusts image size to approx. 1/4 ~ It is designed to carry and work anywhere you wish to 49 times
Краткое содержание страницы № 10
PREPARATION NAME OF EACH PART OF PROJECTOR FRONT OF CABINET TOP CONTROLS AND INDICATORS PROJECTION LENS AIR INTAKE VENT INFRARED LENS COVER REMOTE RECEIVER SPEAKERS BACK OF CABINET TERMINALS INFRARED POWER CORD AND CONNECTORS REMOTE RECEIVER CONNECTOR EXHAUST VENT HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. ● Do not put a flammable object near this vent. ● Keep rear grills at least 3’(1 m) away from an
Краткое содержание страницы № 11
PREPARATION SETTING-UP PROJECTOR POSITIONING PROJECTOR ● This projector is designed to project on a flat ROOM LIGHT projection surface. Brightness in room has a great influence on ● Projector can be focused from 4.6’ (1.4m) ~ 48.3’ picture quality. It is recommended to limit (14.7m). ambient lighting in order to provide best ● Refer to figure below to adjust screen size. image. 48.3’(14.7m) 36.1’(11.0m) Max. Zoom 400” 24.0’(7.3m) 300” 11.8’(3.6m) 308” 200” 4.6’(1.4m) 231” Min. Zoom 100” 154” 40”
Краткое содержание страницы № 12
PREPARATION ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.5 degrees. Lift front of a projector and pull FEET LOCK LATCHES 1 on both sides of a projector. Release FEET LOCK LATCHES to lock ADJUSTABLE 2 FEET and rotate ADJUSTABLE FEET to fine tune position and tilt. To shorten ADJUSTABLE FEET, lift front of a projector 3 and pull and undo FEET LOCK LATCHES. Position and keystone distortion of image can be ad
Краткое содержание страницы № 13
CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 13 to 15 and connect properly. COMPUTER INPUT TERMINALS (DIGITAL/ANALOG) COMPUTER AUDIO INPUT (1 and 2) JACKS Connect computer (digital/analog) output to one of these terminals. Connect an audio output (Refer to P14.) (stereo) from computer to R/C JACK these jacks. When using Wired/Wireless (Refer to P14.) Remote Control
Краткое содержание страницы № 14
CONNECTING PROJECTOR CONNECTING TO COMPUTER Cables used for connection (✽ = Cable or adapter is not supplied with this projector.) • VGA Cable (HDB 15 pin) • USB Cable ✽ • DVI-Digital Cable (for Single Link T.M.D.S.) ✽ • MAC Adapter (When connecting to Macintosh computer) • BNC Cable ✽ • Audio Cables (RCA x 2 and Mini Plug (stereo) x 1) ✽ • Control Cable for PS/2 Port, Serial Port or ADB Port IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA) Desktop type Laptop type Monitor
Краткое содержание страницы № 15
CONNECTING PROJECTOR CONNECTING TO VIDEO EQUIPMENT Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • BNC Cable ✽ • S-VIDEO Cable ✽ • Audio Cable (RCA x 2) ✽ Video Source (example) Component video output equipment. (such as DVD player or high-definition TV source.) Video Cassette Recorder Video Disc Player Composite Component Video Output Composite Component Video Output Audio Output S-VIDEO Output Video Output (Y, Cb/Pb, Cr/Pr) Vid
Краткое содержание страницы № 16
LOCK ON ALL OFF BEFORE OPERATION OPERATION OF REMOTE CONTROL Left Side LASER POINTER INDICATOR POWER ON-OFF BUTTON Lights red while laser beam Used to turn projector on or is emitted from Laser Light off. (P21) ON-OFF Window. ZOOM FOCUS VOLUME INPUT BUTTON Used to select input source. (P24) D.ZOOM MUTE INPUT MENU BUTTON POINT BUTTON Used to select MENU Used to move a pointer on ON- MENU operation. (P19, 20) SCREEN MENU, adjust each item, or pan image in DIGITAL ZOOM +/– mode. (P31) It is also
Краткое содержание страницы № 17
LOCK BEFORE OPERATION Operating Range ON-OFF Point Remote Control Unit toward ZOOM BUTTON projector (Receiver Window) Used to adjust zoom. whenever pressing any button. (P22) ZOOM FOCUS VOLUME BUTTON VOLUME Maximum operating range for Used to adjust volume. Remote Control Unit is about 16.4’ (P23) (5m) and 60° in front and rear of a projector. FOCUS BUTTON D.ZOOM MUTE INPUT D.ZOOM BUTTON Used to adjust focus. (P22) Used to select DIGITAL MENU ZOOM +/– mode and resize image. (P31) MUTE BUTTON 60
Краткое содержание страницы № 18
BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. LAMP REPLACE INDICATOR WARNING TEMP. INDICATOR READY INDICATOR LAMP INDICATOR Turns to yellow when Flashes red when Lights green when a Becomes dim when a life of projection lamp internal projector projector is ready to be projector is turned on. draws to an end. (P41) temperature is too turned on. And it And bright when a high. (P40) flashes green in Power projector is
Краткое содержание страницы № 19
BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN WIRELESS REMOTE CONTROL MENU. Refer to following pages to operate each adjustment on POINT BUTTON ON-SCREEN MENU. Used to move Pointer UP/ DOWN/ RIGHT/ 1 DISPLAY MENU LEFT. Press MENU button to display ON-SCREEN MENU. 2 MOVING POINTER SELECT BUTTON Move pointer (✽ see below) or adjust value of item by pressing Used to select item. POINT button(s) on Top Control o
Краткое содержание страницы № 20
BEFORE OPERATION MENU BAR FOR PC SOURCE Press MENU BUTTON while connecting to PC input source. IMAGE SELECT MENU SCREEN MENU SETTING MENU Used to select Used to adjust size Used to change GUIDE WINDOW PC SYSTEM MENU image level among of image. [Normal settings of projector Shows selected Used to select Standard, Real / True / Wide / or reset Lamp item of ON- computer system. and Image 1 ~ 4. Digital zoom +/–] Replace Counter. SCREEN MENU. (Refer to P24, 25) (Refer to P29) (Refer to P31) (Refer
