Краткое содержание страницы № 1
OWNER’S MANUAL
DATA PROJECTOR
TDP-TW90 (XGA / With PC Card Slot)
Others Maintenance Operations Preparations Before Using
Краткое содержание страницы № 2
Before Using SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended CAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND to alert the user to the presence of uninsulated "dangerous voltage" within the product's INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE enclosure that may be of sufficient magnitude to constitute a risk of electric shock to MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE persons. REFERENCE.
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS (Continued) 5. Heat 8. Power-Cord Protection 10. Lightning storms 12. Do not place the product The product should be situated Power-supply cords should be For added protection for this vertically away from heat sources such as routed so that they are not likely to product during storm, or when it is Do not use the product in the radiators, heat registers, stoves, or be walked on or pinched by items left unattended and unused for upright position to project the othe
Краткое содержание страницы № 4
IMPORTANT SAFETY INSTRUCTIONS (Continued) e) If the product has been dropped or 15. Accessories 19. Replacement Parts 22. Do not use the product in damaged in any way. Do not place this product on an When replacement parts are a closed installation state. f) When the product exhibits a unstable cart, stand, tripod, required, be sure the service Do not place the product in a box distinct change in performance - bracket, or table. The product may technician has used replacement or in any other c
Краткое содержание страницы № 5
IMPORTANT SAFETY INSTRUCTIONS (Continued) POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable. 25. Do not carry the projector by having the terminal Plug Plug cover parts or the PC card configuration Plug type Line voltage configuration Plug type Line voltage cover part Australian 200 – 240V EURO 220 – 240V 240V Doing so, the projector may fall if 10A that cover comes off, and injury or damage may result. Switzerland 200 – 240V UK 220 – 240V
Краткое содержание страницы № 6
IMPORTANT PRECAUTIONS (Continued) OTHER CAUTIONS AND INFORMATIONS Avoid Volatile Liquid Copyrights Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or Showing or transmitting commercial imaging software or broadcast or cable-broad plastic products touching the unit for a long time. They will leave marks on the finish. casting programs with the purpose of other than the personal and private viewing, If cleaning with a chemically saturated cloth, be sure
Краткое содержание страницы № 7
CONTENTS Automatic demonstration ................................................................................ 45 Before Using Playing a slide show from a thumbnail list ...................................................... 46 SAFETY PRECAUTIONS .................................................................................. 2 Checking the projector status ............................................................................ 48 IMPORTANT SAFETY INSTRUCTIONS .........................
Краткое содержание страницы № 8
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. If (7) (6) (5) (4) (3) (2)(1) any item is missing, please contact the store immediately where you purchased the product. (1) (5) (8) (6) (2) (7) (3) (8) (9) (10) (11) (12)(9) (13) (14) Back Front (4) Name : Function (1) Foot adjuster release button : Press to stow the foot adjuster. p.25 ■ ■ (1) Remote control ■ ■ (6) RGB cab
Краткое содержание страницы № 9
(1) (2)(3)(4)(5)(6) (7) (18) (17)(16) (15) (14) (19) Names of each part on the control panel and remote control Parts on the rear panel Control panel Remote Control (8) Remote control (9) (11) (10) transmitter (9) (1) (8) (10) (4) (6) (7) (2) (3) (3) (14) (6) (2) (4) (5) (20) (13)(12)(11) (8) (13) (12) Name : Main Function p.18 (1) Infrared remote sensor : Senses commands from the remote control. (2) CONTROL terminal : When operating the projector via a computer, connect (7) p.71 this to the c
Краткое содержание страницы № 10
Approx. 5m Approx. 5m Preparing and using the remote control Placement ■ Loading dry-cell batteries ■ Operating the remote Placement Styles As shown in the figures below, this device can be placed in 4 different styles. into the remote control control The factory setting is “floor-mounted front projection.” Set the Projection mode in the q Remove the battery cover. Point the remote control toward the p.32 default setting menu , in accordance with your needs. projector’s infrared remote sensor, F
Краткое содержание страницы № 11
Connection How to use the PC card slot The wireless LAN PC card enables you to connect the projector wirelessly with a personal Before connection p.34 computer that supports IEEE802.11b based wireless LAN. (Please note that commu- • Read the owner’s manual of the device you are connecting to the projector. nication between all the computers based on IEEE802.11b and this projector is not • Some types of computer cannot be used or connected to this projector. guaranteed.) You can also use a comm
Краткое содержание страницы № 12
Operations Turning the power on and off Notes ■ Connecting the power cord • The start-up screen will disappear after a moment. You can dismiss the start-up screen Insert the power cord connector into the 1 before this by performing any operation. You can also configure the start-up screen not to AC IN socket of the projector. p.31 appear via the Display setting menu . • The first time you use the projector after purchase, after the start-up screen disappears, Insert the power cord plug into a wa
Краткое содержание страницы № 13
Basic operations 5 Turn on the power. Projector placement angle adjustments 1 p.22 Turn on the power by following the instructions in “Turning the power on” . The placement angle and the height of the projected image can be adjusted by the foot adjuster. 2 Select the language and the lamp power (When using the q Lift up the front of the projector to first time). the desired angle, then press the 1 foot adjuster release button. When the projector is used for the first time after purchase, menu fo
Краткое содержание страницы № 14
Using handy features ● Manual adjustments and settings ■ Using auto setting Remote The menu items of the Set up menu vary depending on the input type, as shown in This function sets up the projector to the optimum state for Control panel Control the table below. each type of the input signal by using simple operations. Use the buttons to adjust the items in the table below, then press 1 Press the SET UP button. the RETURN button when you are finished. The Set up menu appears. Video PC 2 Pre
Краткое содержание страницы № 15
Using handy features (Continued) Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using ■ Cutting off the picture and sound temporarily (Mute) p.16 the operation buttons on the control panel (main unit side) and remote control. Remote When you want to project the images of another projector, overhead Control projector, etc. temporarily, this projector’s images and sound can be ■ How to use the menus turned off. The menu shown below is for operati
Краткое содержание страницы № 16
Using the menu (Continued) ■ The display setting menu ■ The image adjustment menu Use this menu to adjust image-related items. Use this menu to set screen display-related items. Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”. Description Item Video PC Item Description Computer Y/PB/PR S-video card Screen size Contrast Adjust the image contrast. Yes Yes Yes Yes (Full): Display with 1024 × 768 dot resolution Lower Higher (Thru): Display with sa
Краткое содержание страницы № 17
Using the menu (Continued) ■ The default setting menu ■ Displaying Information (Status display) This menu shows placement status and other settings. This displays information about the input signal, lamp use time, etc. Description Item “Yes”: displayed, “No”: not displayed p.19 Projection Sets projection mode in accordance with Placement Style. Video PC (Mounted (Rear mounted Item Description Computer Y/P B/PR mode (Standard) (Rear) from ceiling) from ceiling) S-video card Input Input source n
Краткое содержание страницы № 18
Setting up the wireless LAN ■ Functions ■ Caution when using the wireless LAN functions The following functions are available via wireless communications, when the wireless LAN The Wireless LAN in this unit uses the 2.4 GHz waveband. If there is a similar wireless p.50 PC card and dedicated Wireless Utility software included with this projector are used. LAN in the area, or a wireless device using the 2.4 GHz waveband, or a microwave Note: A wireless LAN PC card except the supplied one (or rec
Краткое содержание страницы № 19
Setting up the wireless LAN (Continued) ■ Setup using the Wireless/Card menu ■ How to enter characters ● Projector settings (Be sure to read this subsection.) Use the numeric keypad on the remote control to enter characters. Enter each charac- ter of interest and press the button to accept it. The factory settings can be used as-is. However, if you need higher security, the projector settings should be changed. Text input mode 1. Press the MENU button twice Display the Wireless/Card menu. Remot
Краткое содержание страницы № 20
Setting up the wireless LAN (Continued) • [SSID] ■ Setting up the network This is an ID code for connecting to specific individuals over a wireless LAN. This may p.36 If you select Network in step 2 in “Projector settings” , the following items can be set. also be called “Network group” or “Network name”. Please read the following carefully. Item Description Note 1: The SSID is set to DPJ when shipped from the factory. If you leave this setting Ad hoc Infrastructure as it is, securi
