Краткое содержание страницы № 15
■ Trigger out port This port outputs a 12-volt DC signal when the projector is turned on. This lets a central control system monitor whether the projector is on or off. It can also be used to raise or lower your projection screen automatically when the projector is in use. Connect to it using a 3.5-mm mini jack cable, as shown. 15
Краткое содержание страницы № 16
16
Краткое содержание страницы № 17
Basic Operation Make sure the projector is set up as described on page 11, then follow the instructions below to turn it on and display an image. Turning On the Projector 1. Remove the lens cap. 2. Press the On button on the remote control or press the Turn on the projector Power button on the projector. The projector takes about 30 seconds to warm up and display an image. If you don’t see a picture, you may need to change the image source as described on the next page. Note: If this is you
Краткое содержание страницы № 18
Turning Off the Projector To turn off the projector, press the Off button on the remote control or press the Power button on the projector twice. Let the projector cool while the Ppower light flashes red (about 30 seconds). Once the light stops flashing and stays on, it’s safe to unplug the projector. Caution: Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce its overall life. Never unplug the projector without pressing the Off or Power button and letting it coo
Краткое содержание страницы № 19
Choosing the Aspect Ratio Composite and S-Video signals are sized automatically to fit on your screen when Auto is selected as the Aspect setting. If you’re viewing a component video signal, you may need to change the size of the image (or aspect ratio) by pressing the Aspect button on the remote control. ■ If your video source is connected to the projector’s Video or S-Video port, select Auto to automatically display your image in the correct size. ■ If the Auto option is unavailable (when
Краткое содержание страницы № 20
Choosing the Color Mode You can change the Color Mode to automatically adjust the brightness, contrast, and color, letting you quickly optimize the projected image for various lighting environments. You can also select a different color mode for each input source, which is useful if you view different types of images from different sources. (For example, you might set the S-Video source to Living Room if that source is usually used for watching movies, and set the Video source to Dynamic fo
Краткое содержание страницы № 1
® ®
Epson PowerLite Cinema 200+
Home Theater Projector
User’s Guide
Краткое содержание страницы № 2
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its
Краткое содержание страницы № 3
Contents Introduction 7 Registration and Warranty 7 Projector Parts 8 Projector Controls 9 Optional Accessories 10 Using This Manual 10 Getting More Information 10 Setting Up the Projector 11 Choosing a Location 11 Connecting the Cables 13 Other Connections 14 Basic Operation 17 Turning On the Projector 17 Turning Off the Projector 18 Selecting the Image Source 18 Choosing the Aspect Ratio 19 Choosing the Color Mode 20 Displaying and Adjusting the Image 20 Focusing and Zooming the Image 21 Selec
Краткое содержание страницы № 4
Making Adjustments 25 Using the Menu System 25 Changing How the Menu Displays 26 Adjusting the Image Quality 27 Brightness and Contrast Settings 27 Sharpness and Picture Quality Settings 28 Color Settings 29 Adjustments for Computer Images 30 Saving and Resetting Menu Selections 31 Creating Memory Settings 31 Resetting the Projector 32 Adjusting the Image Size 33 Setting Screen Display Options 34 Selecting Other Projector Options 34 Using Cinema Color Editor 37 Setting Up Your Computer 37 System
Краткое содержание страницы № 5
Maintenance 49 Cleaning the Lens 49 Cleaning the Projector Case 49 Changing the Remote Control’s Batteries 50 Cleaning and Replacing the Air Filter 51 Replacing the Lamp 52 Resetting the Lamp Usage Timer 53 Storing the Projector 54 Transporting the Projector 54 Problem Solving 55 What To Do When the Lights Flash 55 Checking the Projector Status 56 Solving Picture Problems 57 Solving Remote Control Problems 60 Where To Get Help 61 Specifications 63 General 63 Lamp 63 Remote Control 63 Dimensions
Краткое содержание страницы № 6
Notices 69 Important Safety Information 69 Remote Control Information 70 FCC Compliance Statement 71 Declaration of Conformity 72 Epson America, Inc. Limited Warranty 72 Index 75 6
Краткое содержание страницы № 7
Introduction ® ® The Epson PowerLite Cinema 200+ projector lets you enjoy theater-quality images in the relaxing environment of your own home. Designed especially for home cinema use, it offers these outstanding features: ■ 1280 × 720 resolution, 1000:1 contrast ratio, and up to 1500 lumens for incredibly rich, sharp images TM TM TM ■ Pixelworks Digital Natural Expression (DNX ) technology to make fast-moving images appear clear and lifelike ■ True 16:9 wide-format projection ■ Flexible setu
Краткое содержание страницы № 8
Projector Parts Vertical lens shift knob Control panel Horizontal lens shift knob Lamp cover Lens cover Ventilation slots Infrared receiver Adjustable foot S-Video port Input B Control (RS-232C) port (computer VGA port) Input A USB port (component video) Infrared receiver D4 port (not used in the U.S.) Trigger out port ® Kensington lock port AC power inlet Video port (composite video) 8
Краткое содержание страницы № 9
Projector Controls Menu button Menu navigation Displays the on-screen menu buttons Source button Focus button Switches between equipment connected to the projector Indicator lights Power button Aspect button Changes the picture’s aspect ratio Esc button Exits the current menu item Zoom button Keystone correction buttons Corrects the shape of a non-rectangular image On/Off buttons Menu button Displays the on-screen menu Color Mode button Optimizes viewing for different lighting environments
Краткое содержание страницы № 10
Optional Accessories Epson provides the following optional accessories for the projector: Product Part number Replacement lamp (ELPLP28) V13H010L28 Air filter replacement (ELPAF04) V13H134A04 Ceiling mount ELPHB01 Kensington security lock ELPSL01 S-Video cable ELPSV01 You can purchase many of these accessories from your dealer, by calling Epson SM at (800) 873-7766, or by visiting the Epson Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral
Краткое содержание страницы № 11
Setting Up the Projector Follow the instructions in this section to choose a location for the projector, connect the cables, and display and adjust the image. Choosing a Location You can install the projector for various viewing setups, as shown below. Front/Ceiling Rear/Ceiling Front Rear If you install the projector in a rear or overhead position, you’ll need to flip and/or mirror the image by selecting the correct Projection option (see page 22). For overhead projection, you’ll also need
Краткое содержание страницы № 12
If you place the projector off to the side, aim it straight ahead (rather than at the center of the screen), then use the horizontal lens shift knob to center the image. Do not place the projector farther to the left or right than the edge of the screen, or you will not be able to project a square (or rectangular) image. Vertical lens shift knob Horizontal lens shift knob The maximum size of the image is determined by the distance from the projector’s lens to the screen. Depending on how yo
Краткое содержание страницы № 13
Connecting the Cables You can connect the projector to any type of video equipment, such as a VCR, DVD player, HDTV tuner, cable or satellite box, video game console, camcorder, or digital camera. You ® can also connect it to a desktop or laptop PC or Apple Macintosh system. You can connect up to four pieces of equipment at the same time, as shown in this table: Port name Video equipment connection Computer connection Video Use a standard RCA video cable: — S-Video Use a standard S-Video cable
Краткое содержание страницы № 14
Connect your video or computer equipment to these ports: Connect a computer to this port D4 port (not used in the U.S.) Connect video equipment to any of these ports If you connect to the Input A port, be sure to select the correct Input Signal setting for your equipment, or the image may not display properly (see page 21). Other Connections ■ Power cable Plug the power cable into the projector and a grounded electrical outlet. The P power light on the projector’s control panel turns orange
