Краткое содержание страницы № 1
LCD
Projector
Owner's
Guide
X 10 0
MODEL LVP-X100A
1
Краткое содержание страницы № 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilat- eral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an eq
Краткое содержание страницы № 3
COMPLIANCE NOTICE OF FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference when the equipment is operated in a commer- cial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harm- ful interference to radio
Краткое содержание страницы № 4
Contents Important safeguards........................................................................... 5 Overview of the projector ..................................................................... 8 Overview of the remote control .......................................................... 12 Battery installation ........................................................................................... 13 Preparing the projector for operation ................................................
Краткое содержание страницы № 5
Important safeguards PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR LCD PROJECTOR AND RETAIN THEM FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE LCD PROJECTOR. 1. Read instructions All the safety and operating instructions should be read before the appliance is oper- ated. 2. Retain instructions The safety and operating instructions should be retained for future reference. 3. Warnings All warnings on the appliance and in the operating instructions should be adhered
Краткое содержание страницы № 6
Important safeguards (continued) 9. Ventilation Slots and openings in the cabinet are provided for ventilation, ensuring reliable opera- tion of the projector and to protect it from overheating. Do not block these openings or allow them to be blocked by placing the projector on a bed, sofa, rug, or bookcase. En- sure that there is adequate ventilation and that the manufacturer's instructions have been adhered to. 10. Power sources This projector should be operated only from the type of power sou
Краткое содержание страницы № 7
WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Never remove the cabinet. This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the Owner's Guide, do not attempt to service this product yourself. Please contact y
Краткое содержание страницы № 8
Overview of the projector lamp lid Caution: Do not replace the lamp right after using the projector. The lamp is very hot. Switch the projector to stand-by mode, wait at least 120 seconds for the lamp and LCD panel to cool. Then turn off the main power switch, unplug from the outlet and wait for another one hour or until the lamp is cool to the touch. exhaust slits handle Hold here to carry this projector. control panel temperature indicator This informs you of the thermal condition insi
Краткое содержание страницы № 9
FINE, ADJUST, FOCUS/ZOOM and AUTO buttons The operations of these buttons vary as follows depending on the modes selected: FINE ( ) FINE ( ) º º º º º ª ª ª ª ª FOCUS / ZOOM AUTO Adjust FOCUS or Adjust FOCUS or FOCUS or ZOOM Adjust position Normal Adjust FINE (-) Adjust FINE(+) ZOOM (-) ZOOM (+) setting when incorrect Set or select the Select the setting Select the setting Set or select the Enter the layer – On Menu setting (Down) item (Left) item (Right) setting (Up) setting Select the ima
Краткое содержание страницы № 10
Overview of the projector (continued) Left side PC card eject Press to eject the PC card. See page 36. PC card insert slot This is where you insert the PC card. (You can insert up to two cards.) See page 36. PC audio input (stereo mini jack) Use to input PC audio signals. See pages 18~20. PC analog RGB input video/audio input (mini D-SUB 15P) Use to input video and audio. Use to input RGB signal for PC. See page 21. See pages 18~20. INPUT 1 INPUT 2 MAIN PC-1 IN PC-AUDIO AUDIO MAIN power L PC-1
Краткое содержание страницы № 11
PC analog RGB input 5 1 Use to input video signals (analog RGB) of a personal computer. 10 6 (Pin assignment of Mini D-SUB 15P jack) 15 11 PIN NO. SPEC PIN NO. SPEC 1 R(RED) / Cr 9 - 2 G(GREEN) / Y 10 GROUND 3 B(BLUE) / Cb 11 GROUND 4 GROUND 12 - 5 GROUND 13 HD/CS 6 GROUND 14 VD 7 GROUND 15 - 8 GROUND RS-232C input • Connect here when you control this Projector with a personal computer 1 5 using PCGC (personal computer graphic controller) or with a remote controller using SpacePointer function.
Краткое содержание страницы № 12
Overview of the remote control operation indicator When the operation button is pressed, this indicator blinks. When the PC mode or cursor operation mode is on, this indicator lights up. See pages 33, 45. cancel select This operates in the same way as This operates in the same way as the right button on the computer the left button on the computer SELECT mouse. See pages 33, 45. mouse. See pages 33, 45. start/stop Use to turn the PC control DOUBLE double click CANCEL mode or cursor oper
Краткое содержание страницы № 13
Important: • The select, double click, cancel and start/stop buttons are used for PC control. See page 45. • To save battery power, turn off the operation indicator by pressing the START/STOP button when not in use. • To save battery power, the operation indicator will turn off if the remote control is not operated for a period of 5 minutes. Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of t
Краткое содержание страницы № 14
Preparing the projector for operation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. screen To find the approximate distance between the projector and screen: Multiply the width of the screen x 1.85 1.95 (max.) , Multiply the width of the screen x 2.33 2.53 (min.) , • Refer to the chart to recom- mended distaces in maximum H (height) zoom and minimum zoom. L (between the screen and center of the head of the lens-barrel) Dis
Краткое содержание страницы № 15
Adjusting the angle of projection • Screen on a flat wall with a 90˚ angle to the floor. • Align projector to produce a full screen display as illustrated on page 14. • Distance from projector to screen must be compatible with screen size chart on page 14. Note distance from screen chart. • If image is not square on screen, try adjusting the front feet of the projector for proper angle. foot adjustment screen Getting ready for projection 1. Connect the power cord provided to this projector with
Краткое содержание страницы № 16
Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal computers having analog RGB input. Important: • Make sure that your equipment is turned off before connection. • Match the color of video and audio plugs on the AV cable with each terminal. • Plug in firmly and unplug by holding the plug, not by pulling the cable out. • If connected units are set too close to one another, the image may be affected. Setting connected units t
Краткое содержание страницы № 17
ON 1 2 3 4 5 6 7 8 9 10 Order of turning on / off Turn on equipment in the following order to avoid trouble. 1. PC monitor 2. AV equipment 3. Projector 4. Personal computer Turn off the equipment in the reverse order. Important: Some computers may not be compatible with this projector. Cables and adapters To connect personal computers to this projector, the following cables and adapters are necessary. The overview might be different from the picture below. RGB cables (mini D-SUB 15P plug) PIN
Краткое содержание страницы № 18
Basic connections (continue) Projector + IBM PC or IBM PC compatibles (DOS) Make sure that your equipment is turned off before connection. Important: • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer. • The audio input for a personal computer is the stereo mini-jack. There are some personal computers that have different types of audio outputs or none at all. Please ask your dealer for details. •
Краткое содержание страницы № 19
Projector + Macintosh Make sure that your equipment is turned off before connection. Important: • A monitor output adapter is necessary for a Macintosh if it has no video port. Contact your dealer. • If you use the RGB conversion adapter provided, set the dip switch to the appropriate position. See page 17. • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer. • The audio input for a personal compu
Краткое содержание страницы № 20
Basic connections (continue) Projector + NEC PC-98 and EPSON PC series Make sure that your equipment is turned off before connection. Important: • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer. • The audio input for a personal computer is the stereo mini jack. There are some personal comput- ers that have different type or no audio outputs. Please ask your dealer for details. • For connection
