Краткое содержание страницы № 1
Getting Started Basic Operation Special Features For Your Information
Camcorder
Operating Instructions
Model No. PV-L751
Please read these instructions carefully before attempting to operate this product.
Please save this manual.
Guía para rápida consulta en español está incluida.
For assistance, please call : 1-800-211-PANA(7262) or
send e-mail to : consumerproducts@panasonic.com
LSQT0359A
Краткое содержание страницы № 2
Things You Should Know Thank you for choosing Panasonic! Date of Purchase You have purchased one of the most sophisticated and reliable products on the Dealer Purchased From market today. Used properly, it will bring Dealer Address you years of enjoyment. Please take time to fill in the information at the right. Dealer Phone No. The serial number is on the tag located on Model No. the rear side of your Camcorder. Be sure to retain this manual as your convenient Serial No. Camcorder information s
Краткое содержание страницы № 3
Getting Started Things You Should Know Safety Precautions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Your Compact VHS Camcorder is designed to record and play back in Standard Play (SP) and Super Long Play (SLP) modes. You can also play a Compact VHS Camcorder recording on your VHS VCR using the VHS PlayPak supplied. This Camcorder is equipped with the HQ System to provide excellent video pictures, and is compatible with standard VHS equipment. It
Краткое содержание страницы № 4
Important Safeguards 1. Read Instructions – All the safety and 11. Grounding or Polarization – This video unit operating instructions should be read before may be equipped with either a polarized 2- the unit is operated. wire AC (Alternating Current) line plug (a plug having one blade wider than the other) 2. Retain Instructions – The safety and or 3-wire grounding type plug, a plug having operating instructions should be retained for a third (grounding) pin. future reference. The 2-wire polariz
Краткое содержание страницы № 5
Getting Started Important Safeguards 15. Power Lines – An outside antenna system b. If any liquid has been spilled into, or should not be located in the vicinity of overhead objects have fallen onto, the video unit. power lines or other electric light or power c. If the video unit has been exposed to rain circuits, or where it can fall into such power or water. lines or circuits. When installing an outside d. If the video unit does not operate normally antenna system, extreme care should be take
Краткое содержание страницы № 6
Getting Started Basic Operation Special Features For Your Information Table of Contents Things You Should Know .............................................................................2~3 Important Safeguards ...................................................................................4~5 Precautions........................................................................................................5 Self Demo Mode ....................................................................
Краткое содержание страницы № 7
Getting Started Self Demo Mode Self Demo mode is on when the screen Before you begin... below appears. To turn it off, follow • Connect Camcorder to power source. steps 1-4 below. EVF or LCD Monitor ITS TAPES PLAY ITS TAPES PLAY IN YOUR VCR IN YOUR VCR , YES, YES, IT S VHS! IT S VHS! 26 26× LENS / 300 LENS / 300× D.ZOOM D.ZOOM DIGITAL STABILIZATION DIGITAL STABILIZATION 1 Set POWER to CAMERA. FULL-SIZE HEAD SYSTEM FULL-SIZE HEAD SYSTEM AUTO/PHRASE TITLER AUTO/PHRASE TIT
Краткое содержание страницы № 8
BATTERY PACK Quick Operation Guide Charging the Battery Pack Insert Cassette Charge Battery Pack fully before operation (page 9). Attach fully 1 charged Battery (page 9). Plug in AC 1 Adaptor. Slide TAPE EJECT 2 to open door. Insert cassette 3 (page 11). Press here to close Insert Battery. CHARGE 4 2 door. Lamp flashes, then stays lit Protection Film when charging is complete. Note: • Remove the Protection Film before use. Camera Recording When the LCD monitor is open, the EVF automatically
Краткое содержание страницы № 9
Getting Started BATTERY PACK BATTERY PACK Supplying Power Charging the Battery Pack 1 Plug in AC Adaptor. Charge Battery Pack fully before use. POWER Lamp lights. 3 2 Insert Battery. 2 A Align left side of Battery with left edge of AC Adaptor. B Press Battery down and slide in direction of arrow. POWER The CHARGE Lamp flashes, then stays lit 1 when charging is complete. Lamp 3 Remove Battery. Slide Battery to the left and lift off. Note: CHARGE • Charging takes about 1 and 1/2 hours. Lam
Краткое содержание страницы № 10
RBRC Supplying Power Battery Care Caution: To avoid Battery damage: • Charge only with specified charger. • Do not drop or jar Battery. • Battery can be charged within a temperature range of • Use Battery with specified units only. 10 °C (50 °F) and 35 °C (95 °F). • If Battery is used in extremely high • Battery is normally warm after charging or just after use. temperatures, a safety device will • Do not use an insufficiently charged or worn-out Battery. automatically prevent operation. Safety
Краткое содержание страницы № 11
Getting Started Cassette Information Cassette Insertion/Removal 1 Turn Tape Wheel in direction of arrow until there is no slack. 1 2 Attach Battery (page 9). 3 2 3 Slide TAPE EJECT to open door. 4 Insert cassette as shown. 4 5 Press here to close door. • To remove the cassette, slide the TAPE 5 EJECT switch. Record/Playback Time Use tapes with the mark in this unit. Cassette type Tape Speed Selector Position TC-20 TC-30 TC-40 SP 20 minutes 30 minutes 40 minutes (Standard Play) SLP 1 hour 1 hour
Краткое содержание страницы № 12
Using MENU Mode Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA or VCR. FAR UP UP FOCUS 1 Press MENU for MENU mode. 2 DOWN DOWN The CAMERA or VCR MENU screen (see NEAR below left) appears when Menu mode is DISPLAY DISPLAY MENU MENU entered. 1, 4 3 2 Press UP or DOWN to highlight the desired menu item. 3 Press DISPLAY to set selection. 4 Press MENU to exit. Note: • The Menu mode is canceled if UP/DOWN( / ), DISPLAY, or MENU are not pressed within 5 minutes whe
Краткое содержание страницы № 13
Getting Started Setting the Clock Set the following items in order: Time Before you begin... Zone, Daylight Saving Time, Date, • Connect Camcorder to power source. and Time. • Set POWER to CAMERA or VCR. 1 Press MENU for MENU mode. Press UP or DOWN to select CLOCK SET . --- MENU MENU --- PAGE PAGE 1/2 1/2 - - - MENU - - - - - - MENU - - - FAR PROGRAMMED REC PROGRAMMED REC CLOCK SET CLOCK SET UP UP TI TI TLE TLE ; ; AUTO/MANUA
Краткое содержание страницы № 14
Setting the Clock (continued) Setting the Time Zone 3a - - - SELECT TIME ZONE - - - Press UP or The Camcorder is preset to Eastern time. ATLANTIC C PACIFIC C DOWN to select EASTERN ALASKA [ Time Zone chart ] CENTRAL HAWAII local time zone. MOUNTAIN N SAMOA Press DISPLAY to SELECT : PUSH / KEY SET : PUSH DISPLAY KEY confirm entry. ALASKA ALASKA MOUNTAIN MOUNTAIN • When traveling, repeat this operation and select one of the 8 listed time zones to set the clock to local time. C
Краткое содержание страницы № 15
Basic Operation Built-in Auto Light Before you begin... Using the Light • Connect Camcorder to power source. For recording in dim lighting. • Set POWER to CAMERA. Set LIGHT to AUTO. LIGHT LIGHT Light turns on/off automatically according ON OFF AUTO to lighting conditions. Or, set LIGHT to ON/OFF manually. SP 1x REC appears in EVF or Note: LCD monitor when • Using Light reduces battery operating time. Light is on. • Provide proper ventilation when using 12:00:00AM JAN 1 2001 Light extensively in
Краткое содержание страницы № 16
Camera Recording Before you begin... Recording via EVF or LCD • Connect Camcorder to power source. Monitor • Insert cassette with record tab (page 11). View recording scene on EVF or LCD (Liquid Crystal Display) monitor. 1 Press LCD-OPEN to unlock the LCD monitor. Swing LCD monitor fully open 3 and adjust viewing angle. • If you want to record using EVF, close and lock LCD monitor. PAUSE 2 Set POWER to 1 CAMERA. Lens Cover opens. CAUTION : Power Lamp lights. Rotating partially open LCD • Be sure
Краткое содержание страницы № 17
Basic Operation Camera Recording Before you begin... Stand-by Quick Release • Connect Camcorder to power source. If left in RECORD/PAUSE mode for 5 • Insert cassette with record tab (page 11). minutes, Camcorder switches to Stand- by mode to conserve battery. When set to ON, Stand-by Quick Release lets FAR UP you resume recording by pressing FOCUS RECORD/PAUSE two times. Stand-by DOWN DOWN Quick Release is set to OFF at the NEAR 2, 3, 4 factory. DISPLAY MENU 1 Set POWER to CAMERA. --- MENU M
Краткое содержание страницы № 18
Camera Recording Before you begin... Programmed Recording • Connect Camcorder to power source. Set a recording start and stop time. Or, Use AC Adaptor for longer recordings. set a 5 or 10 second interval recording • Insert cassette with record tab (page 11). • Set POWER to CAMERA. to be done each minute. FAR FAR UP --- MENU MENU --- PAGE PAGE 1/2 1/2 FOCUS FOCUS 1 Press MENU for MENU PROGRAMMED REC PROGRAMMED REC DOWN TI TI TLE TLE ; ; AUTO/MANUAL AUTO/MANUAL 1, 2, 3 NEAR NEAR mo
Краткое содержание страницы № 19
Basic Operation 8-Function Remote Control Remote Control Operation Operate Camcorder’s main functions up to about 5 m (16 feet) away. Aim remote at sensor on Camcorder. Controlled Functions 1 POWER ZOOM page 23. T REC/ PAUSE 2 REWIND/SEARCH 1 5 page 20. W 3 PLAY REW SEARCH FF 2 page 20. 4STOP 6 PLAY page 20. 3 5 RECORD/PAUSE STOP STILL page 16. 6 FAST FORWARD/SEARCH 4 7 page 20. 7 STILL page 20. Note: • If you press REC/PAUSE on the remote control with the LCD monitor rotated 180
Краткое содержание страницы № 20
Playing Back Recordings Before you begin... Playback on EVF or LCD Monitor • Connect Camcorder to power source. • Insert recorded tape. Press LCD-OPEN and swing LCD 1 monitor fully open. • If you want to playback on EVF, close and lock LCD monitor. D Set POWER to VCR. 2 Power Lamp lights. • If tape has no record tab, auto playback begins. 1 • EVF or LCD monitor turns on/off by the POWER switch. Speaker • EVF shuts off when LCD monitor is opened and turns back on when LCD 3 is closed. FAR UP Play
