Краткое содержание страницы № 1
BiPAC 7401VP/VGP
VoIP/(802.11g) ADSL2+ Router
User’s Manual
Version Release 2.04
Краткое содержание страницы № 2
Table of Contents Table of Contents CHAPTER 1: INTRODUCTION ............................................................................................................. 3 INTRODUCTION TO YOUR ROUTER ............................................................................................................. 3 FEATURES.................................................................................................................................................. 3 CHAPTER 2: INSTALLING
Краткое содержание страницы № 3
System ................................................................................................................................................. 51 Time Zone ...................................................................................................................................... 51 Remote Access ............................................................................................................................... 52 Firmware Upgrade................................
Краткое содержание страницы № 4
VoIP/(802.11g) ADSL2+ Router Chapter 1: Introduction Introduction to your Router Welcome to the VoIP/(802.11g) ADSL2+ Router. The router is an “all-in-one” VoIP ADSL router, combining an ADSL modem, ADSL router, Ethernet network switch and 1 ports for Voice over IP functionalities, providing everything you need to get the machines on your network connected to the Internet over your ADSL broadband connection. With features such as an ADSL Quick-Start wizard and DHCP Server, you can be o
Краткое содержание страницы № 5
VoIP/(802.11g) ADSL2+ Router Quick Installation Wizard Supports a WEB GUI page to install this device quickly. With this wizard, end users can enter the information easily which they get from their ISP, then surf the Internet immediately. Universal Plug and Play (UPnP) and UPnP NAT Traversal This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs from many different vendors. It makes network simple and affordable for users. UPnP arc
Краткое содержание страницы № 6
VoIP/(802.11g) ADSL2+ Router Dynamic Host Configuration Protocol (DHCP) client and server In the WAN site, the DHCP client can get an IP address from the Internet Service Provider (ISP) automatically. In the LAN site, the DHCP server can allocate a range of client IP addresses and distribute them including IP address, subnet mask as well as DNS IP address to local computers. It provides an easy way to manage the local IP network. Static and RIP1/2 Routing Supports an easy static r
Краткое содержание страницы № 7
VoIP/(802.11g) ADSL2+ Router Chapter 2: Installing the Router Important note for using this router Do not use this router in high humidity or high temperatures. Do not use the same power source for this router as other equipment. Do not open or repair the case yourself. If this router is too hot, Warning turn off the power immediately and have it repaired at a qualified service center. Avoid using this product and all accessories outdoors. Plac
Краткое содержание страницы № 8
VoIP/(802.11g) ADSL2+ Router The Front LEDs LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready. Lit when connected to an Ethernet device. LAN Port 3 – 6 Green for 100Mbps; Orange for 10Mbps. 1X — 4X (RJ-45 connector) Blinking when data is Transmitted / Received. WLAN Lit green when the wireless connection is established. 8 (Wireless router only) Flashes when sending/receiving data. Phone 9 Lit green when the phone is off-hook. (RJ-11 connector
Краткое содержание страницы № 9
VoIP/(802.11g) ADSL2+ Router The Rear Ports 3 1 6 5 8 4 2 7 The Ethernet Port # 4 can be connected to the computer and console. You need a special console tool which is included in this package to connect the LAN cable of Port 4 when connecting to a PC’s RS-232 port (9-pin serial port). Port Meaning Power Switch 1 Power ON/OFF switch Power 2 Connect the supplied power adapter to this jack. After the device is powered on, press it to reset the device o
Краткое содержание страницы № 10
VoIP/(802.11g) ADSL2+ Router Cabling One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables. Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax machines, analogue modems) have a line filter connected bet
Краткое содержание страницы № 11
VoIP/(802.11g) ADSL2+ Router Chapter 3: Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The product provides a very easy and user-friendly interface for configuration. PCs must have an Ethernet interface installed properly and be connected to the router either directly or through an external repeater hub, and have TCP/IP installed
Краткое содержание страницы № 12
VoIP/(802.11g) ADSL2+ Router Connecting your router 1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit. 4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set. 5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack. (802.11g is not supported in BiPAC 7401VP) Switching/ HUB ADSL Phone ADSL Splitte
Краткое содержание страницы № 13
VoIP/(802.11g) ADSL2+ Router Configuring PCs in Windows in Window XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click Network Connections. 2. Double-click Local Area Connection. (See Figure 3.1) Figure 3.1: LAN Area Connection 3. In the LAN Area Connection Status window, click Properties. (See Figure 3.2) Figure 3.2: LAN Connection Status 4. Select Internet Protocol (TCP/IP) and click Properties. (Se
Краткое содержание страницы № 14
VoIP/(802.11g) ADSL2+ Router Configuring PCs in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and Dial-up Connections. 2. Double-click Local Area (“LAN”) Connection. (See Figure 3.5) Figure 3.5: LAN Area Connection 3. In the LAN Area Connection Status window, click Properties. (See Figure 3.6) Figure 3.6: LAN Connection Status 4. Select Internet Protocol (TCP/IP) and click Properties.
Краткое содержание страницы № 15
VoIP/(802.11g) ADSL2+ Router Configuring PC in Windows 95/98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. (See Figure 3.9) 3. Click Properties. Figure 3.9: TCP / IP 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button. (See Figure 3
Краткое содержание страницы № 16
VoIP/(802.11g) ADSL2+ Router Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. (See Figure 3.12) Figure 3.12: TCP / IP 3. Select the Obtain an IP address from a DHCP server radio button and click OK. (See Figure 3.13) Figure 3.13: IP Address 15 Chapter 3: Basic Installat
Краткое содержание страницы № 17
VoIP/(802.11g) ADSL2+ Router Factory Default Settings Before configuring your, you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “admin” and “admin” respectively. If you ever forget the password to log in, you may press the RESET button up to 6 seconds to restore the factory default settings. Attention Attention LAN Device IP Settings IP Address: 192.168.1.254
Краткое содержание страницы № 18
VoIP/(802.11g) ADSL2+ Router Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA. Gather the information as illustrated in the following table and keep it for reference. PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, Service Name, and Domain Name System (DNS) IP address (it can be automatically assigned by your ISP when you conn
Краткое содержание страницы № 19
VoIP/(802.11g) ADSL2+ Router Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “Go”, a user name and password window prompt will appear. The default username and password are “admin” and “admin”. (See Figure 3.14) Figure 3.14: User name & Password Prompt Widonw Congratulation! You are now successfully logon to the VoIP ADSL2+ Router! 18 Chapter 3: Basic Installation
Краткое содержание страницы № 20
VoIP/(802.11g) ADSL2+ Router Chapter 4: Configuration At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: Status (ARP Table, Wireless Association Table(wireless router only), Routing Table, DHCP Table, Email Status, VoIP Status, Event Log, Error Log, NAT Sessions, Diagnostic and UPnP Portmap) Quick Start Configuration (LAN, WAN, System, Firewall, VoIP, QoS, Virtual Server, Time Sched
