Краткое содержание страницы № 1
IR-PLUS
RoHS/Manual/IRPLUS/100GBFAAR
*20007-1560PT*
20000-5760
Краткое содержание страницы № 2
** Thank you for purchasing a HUMAX Digital Satellite Receiver. Please read this user manual carefully, to be able to safely install, use and maintain the product at maximum performance. Keep this user manual next to your product for future reference. Throughout the whole manual, Note mark indicates additional information of operating product to make the user aware of possible problems and information of any importance to help the user to understand, to use and to maintain the installation. ** C
Краткое содержание страницы № 3
** Theproducthasbeenmanufacturedtosatisfyinternationalsafetystandards.Pleasereadthefollowingsafetyprecautions andwarningcarefully. ** • Disconnect the product from the mains before you start any maintenance or installation procedures. � Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock. � The product should not be exposed to any liquids such as dripping or splashing. In addition, no objects filled with liquids, such as vases, should be placed o
Краткое содержание страницы № 4
** 1.BeforeUsingtheProduct GB5 ** 1.1 Package Contents GB5 1.2 Front Panel GB6 1.3 Rear Panel GB8 1.4 Conditional Access GB9 1.5 Remote Controller GB10 2.Setup GB12 ** 2.1 Connecting Antenna/TV GB12 2.2 Connecting Hi-Fi System GB13 2.3 Powering On GB14 3.Installation GB15 ** 3.1 Selecting Language GB15 3.2 Searching Services GB15 3.3 Default Setting GB21 4.BasicOperation GB22 ** 4.1 Viewing Programme GB22 4.2 Changing Language GB23 4.3 Teletext GB23 4.4 Setting Property of Service GB24 GB3
Краткое содержание страницы № 5
** 5.ServiceList GB25 ** 5.1 Switching Services GB25 5.2 Organising Services GB26 5.3 Organising Favourite Services GB27 5.4 Organising Satellites GB28 6.ProgrammeGuide GB29 7.SettingPreferences GB31 ** 7.1 Parental Control GB31 7.2 System Setting GB31 8.SystemInformation GB33 9.Utility GB34 10.SoftwareUpdate GB35 11.Troubleshooting GB37 12.Specification GB39 13.ServiceandSupport GB40 GB4
Краткое содержание страницы № 6
** This chapter provides detailed instructions on the product and its accessories. 1.1PackageContents When you unpack your package contents, make sure you have all the necessary items shown in figure below. If any of items is missing or damaged, please contact your product dealer for replacement. ** ** RemoteController Batteries User'sManual RCACable ** ** ** ** ** Note: The product image may differ from the actual product. GB5
Краткое содержание страницы № 7
** 1.2FrontPanel ** ** Note: The front panel of the product may differ according to the product type. GB6
Краткое содержание страницы № 8
** 1. STANDBYLED ** Red light is emitted when the product is in standby mode. Green light is emitted when the product is in operation. (The second front panel only) ** 2. TVLED ** Green light is emitted when the product is in TV mode. ** 3. RADIOLED ** Amber light is emitted when the product is in Radio mode. ** 4. STANDBYButton ** Switches between Operation and Standby modes. ** 5. VOLButton ** Display the volume bar. ** 6. CH-/CH+orVOL-/VOL+ ** Moves the TV/Radio service or volume up/down. **
Краткое содержание страницы № 9
** 1.3RearPanel ** ** 1. LNBIN 5. VIDEO ** ** Connects a satellite antenna cable. Connects to your TV or VCR and output Video signals. ** ** 2. LNBOUT 6. RFOUT ** ** Connect other digital satellite receiver. Connect a RF signal from the product to RF input jack ** on your TV. 3. RS-232C ** ** 7. RFIN Connects to your PC to update product’s software ** programme. Connect a general aerial antenna with the cable jacks to ** the RF input jack on the product. 4. AUDIOL/R ** Connects to your TV or VCR
Краткое содержание страницы № 10
** 1.4ConditionalAccess Although some TV and Radio services are free to air, most TV and Radio/Music services are available on a subscription basis and can only be enjoyed via Conditional Access component. The Conditional Access component is removable Smartcard. ** InsertingSmartcard ** A Smartcard looks similar to a credit card and entitles you to view and listen to all the services you choose to subscribe to. The Smartcard slot on the product can be used for Irdeto Smartcard only. ** 1. Open t
Краткое содержание страницы № 11
** 1.5RemoteController 1. SOURCE ** Selects the input source between TV and product. ** 2. TV/RADIO ** Switches between TV and Radio modes. ** 3. NUMERICALBUTTONS ** Enters a TV/Radio service number. ** 4. MENU ** Displays the main menu. ** 5. TIME-WHITE ** Displays the current time on the screen. To set the current time, refer to 7.2 System Setting. ** 6. ARROWBUTTONS ** Change services or move the cursor to the up, down, left or right menu option. ** 7. i(INFORMATION)-RED ** Displays the infor
Краткое содержание страницы № 12
** 9. CH-/CH+ 17.ZOOM-BLUE ** ** Changes the Service. Enlarges the picture. ** ** 10.RECALL 18.SUBTITLE-YELLOW ** ** Returns to the previous screen. Display the subtitle language list where available. ** ** 11.FREEZE 19.V-/V+ ** ** Freezes the TV screen you are watching. Play the Adjusts the audio volume. ** audio continuously. 20.MUTE ** ** 12.WIDE Pauses the audio temporarily. That is, volumes on/off ** Changes the Display Format. temporarily. ** ** 13.STANDBY 21.UHF ** ** Switches between Ope
Краткое содержание страницы № 13
** This chapter describes how to set up the product. Select the most appropriate procedure depending on your case. Before you connect the product to any other equipment, you must disconnect all the equipment from their power sources. Note: If you encounter any problem when setting up the product, please contact your local product distributor. 2.1ConnectingAntenna/TV ** ** 1. Connect an Antenna to LNB IN on the product. 2. Connect VIDEO on the product to VIDEO IN on the TV using the RCA cable. 3.
Краткое содержание страницы № 14
** 2.2ConnectingHi-FiSystem ** ** 1. Connect an Antenna to LNB IN on the product. 2. Connect VIDEO on the product to VIDEO IN on the TV using the RCA cable. 3. Connect AUDIO L/R on the product to AUDIO IN L/R on the Audio System using the RCA cable. GB13
Краткое содержание страницы № 15
** 2.3PoweringOn ** 1. Connect the power cord of the product to a wall outlet. ** ** 2. Press theSTANDBY button on the front of the product or on the remote controller. ** GB14
Краткое содержание страницы № 16
** 3.1SelectingLanguage When powering on your product for the first time after purchasing, the Selecting Language screen is automatically displayed. Select your desired language using the button and press theOK button. The following procedure is HUMAX Auto Search. For information about it, refer to 3.2 Searching Services. 3.2SearchingServices To search services, go to Service Searching menu (MENU-INSTALLATION-SERVICE SEARCHING). ** ** Menu structure varies according to an item and its operation.
Краткое содержание страницы № 17
** 1.HUMAXAutoSearch If your product is connected to the antenna and television, you can automatically search services without entering any other information. Warning: Please note that once you perform HUMAX Auto Search, all data such as Antenna setting information channel lists and smart card information you already set are deleted. When you select this menu, you can view the window asking if you have a motorized dish. If you wish to stop the operation, press the EXIT button. If you do not have
Краткое содержание страницы № 18
** 2.AntennaSetting You can set antenna and LNB information to search services. ** � AntennaAlternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for SMATV. � SatelliteName: Displays the satellite list ordered by name. If the desired satellite name is not listed, then select User Defined. You can enter the Satellite Name using the keyboard displayed on the screen. � LNBFrequency: Select the L.O (Local Oscillator) Fre
Краткое содержание страницы № 19
** 3.ManualSearch You can search services of the selected satellite by transponders if you know the transponder information. ** � AntennaAlternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for SMATV. � Frequency: Enter transponder frequency. � Polarisation: Select the type of polarisation. � SymbolRate: Select or enter transponder symbol rate. � FEC: Select FEC (Forward Error Correction). � NetworkSearch: If you wa
Краткое содержание страницы № 20
** 4.SatelliteSetting This menu appears only when you enable Motorised System in Antenna Setting menu and press theOK button while Antenna Alternative in Manual Search menu is selected. ** � SatelliteName: Select a satellite to identify a motor antenna. If the desired satellite name is not listed, then select OTHER. � Movement: In user mode, this is used to fine-tune the position of the motor. In installer mode, this is used to search for the position of the satellite manually. � MotorControl: Y
