Краткое содержание страницы № 1
4 CHANNEL DVR
SDE-120N/SDE-3000N/SDE-3001N
User Manual
SDE-3170P/SDE-3002/SDE-3002P
Lo-Call 1890 866 900 www.cctvireland.ie
Краткое содержание страницы № 2
overview FEATURES This product enables you to record 4 channels of camera image and voice source simultaneously. This feature provides an excellent picture quality for both real time monitoring and search. • You can also monitor remote videos or search for your previous recordings and change the menu settings of the DVR via the network. • As this product can bypass the Windows operating system to implement the DVR-specific operating system on its hardware components, the overall operation is
Краткое содержание страницы № 3
OVERVIEW IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8)
Краткое содержание страницы № 4
overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER CAUTION SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying th
Краткое содержание страницы № 5
OVERVIEW CAUTION 1. Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°F), or high humidity. Doing so may cause fire or electric shock. 3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it. 4. Remove the power plug from the outlet when t
Краткое содержание страницы № 6
overview BEFORE START This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: • SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in t
Краткое содержание страницы № 7
OVERVIEW Standards Approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 M of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to ra
Краткое содержание страницы № 8
overview CONTENTS 2 Features OVERVIEW 3 Important Safety Instructions 6 Before Start 2 10 Part Names and Functions (Front) 11 Part Names and Functions (Rear) 12 Remote Control 13 DIY Camera 14 Camera Bracket 16 Connecting the Camera, Audio, Speaker, CONNECTING WITH OTHER DEVICE Mouse, and Power Cable 16 Connecting the Alarm I/O 16 17 Network Connection 19 Starting the System GETTING STARTED 19 Log On 20 Log In 19 20 Log Off 20 Power Off 21 Live Screen Configuration LIVE 22 View the Launcher Men
Краткое содержание страницы № 9
OVERVIEW 51 Backup BACKUP 51 53 Search SEARCH & PLAY 53 55 Introduction WEB VIEWER 58 Live Viewer 61 Search Viewer 55 62 Search by Time 62 Search by Event 63 Setup 69 Information 70 Using the iPhone 71 Camera Specification APPENDIX 72 Product Specification (SDE-120N/SDE-3000N/SDE-3001N) 71 74 Product Specification (SDE-3170P/SDE-3002P/SDE-3002) 76 Open Source License Report on the Product English _9 Lo-Call 1890 866 900 www.cctvireland.ie
Краткое содержание страницы № 10
overview PART NAMES AND FUNCTIONS (FRONT) 8 7 6 POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER DISPLAY SEARCH MENU 1 2 3 4 5 Part Names Functions Power Used to turn on or off the system. Each time you press in Live mode, the screen will be switched in the sequence of 4-split, Single DISPLAY b and Auto Sequence in order. SERACH Goes to the search screen. c MENU Goes to the system menu screen. Direction ▲▼◄► : Used to select a system menu item. : Selects and runs a menu item. Enter This
Краткое содержание страницы № 11
OVERVIEW PART NAMES AND FUNCTIONS (REAR) 1 2 3 4 5 6 7 8 9 Part Names Functions DC Input (DC12V) Power connection port for 12V/4A adaptor NETWORK RJ-45 port for network connection. b Supports USB 2.0 protocol that enables you to back up the video signal stored in the HDD USB using an external memory device and to connect USB memory. CAMERA IN (1~4) Connector linked to the Port DIY CAMERA c VIDEO IN Composite video signal input port (BNC type port). VIDEO OUT Composite video signal output p
Краткое содержание страницы № 12
overview REMOTE CONTROL DVR Available after switching to DVR mode by pressing the [DVR] button on the remote control. SEARCH BACKUP Switches to search mode for video search. Switches to backup mode. At the moment, you should select an authorized user and enter the password. DVR Activates the DVR function. MODE Changes the display mode. POWER Turns on/off or logout the system. Channel If you press a channel number in real time monitoring or search mode, the camera’s input of the selected ID c
Краткое содержание страницы № 13
OVERVIEW Changing Remote Control ID In a multi-DVR system using a single remote control, you can control only the DVR that matches the ID that you have set using the ID button. 1. Press the [ID] button to check the ID of each of "REMOCON ID" and "SYSTEM ID". The defaults are 00 for the System ID and 00 for the Remote ID, respectively. 2. To change the Remote ID of the IR REMOTE CONTROLLER, press and hold the [ID] button while entering a desired combination of two digits from 00 to 99. 3. To
Краткое содержание страницы № 14
overview Mini Din Cable SHIELD b c 12V b VIDEO c Installing the camera The camera can be installed on the wall, ceiling, shelf or a desired position using the provided bracket. 1. Select a position where you want to install the camera. Make sure the selected position can sustain the weight of the camera. 2. Use the screw bolts (M4 × L15) to mount the camera bracket onto the wall or ceiling. M4 × L15 sized 3. Place the camera on the selected position and fit the hole either screws on th
Краткое содержание страницы № 15
OVERVIEW Adjusting the Camera Bracket 1. Choose an installation site that can sufficiently support the weight of the equipments to be installed. 2. Attach the camera bracket to the wall using the supplied screws (M4 × L15). 4×15 sized screws wall or ceiling. 3. Adjust the camera to target the video location and tighten the camera bracket handle on the camera bracket. Install the camera on to the male screw of the camera bracket by rotating the camera in clockwise. 4. Loosen the handle by tur
Краткое содержание страницы № 16
connecting with other device CONNECTING THE CAMERA, AUDIO, SPEAKER, MOUSE, AND POWER CABLE Network CONNECTING THE ALARM I/O Connecting the alarm Input signal Connection port for the alarm input signal. Connect one strand of the sensor signal line (two strands) to the alarm input port and connect the other to the [G] port. Connecting the alarm output signal Connection port for the alarm output signal. • NO (Normal Open) : Sensor is open in normal condition, it generates alarm if the sensor is
Краткое содержание страницы № 17
CONNECTING WITH OTHER DEVICE NETWORK CONNECTION Local System Confi guration Use the router or hub in the same local network to connect to the DVR and local PC where you can control the remote DVR or check the recording data in the DVR. IP Router or HUB POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER DISPLAY SEARCH MENU DVR Local PC #1 Local PC #2 1. Connect the network port on the rear DVR panel to the router or hub. 2. Connect the network port on the local PC to the router or hub. 3. Enter “IP
Краткое содержание страницы № 18
connecting with other device Total System Confi guration You can use the 10/100 Mbps Ethernet connector on the product to connect to the network. Connecting to the network enables you to perform various functions including remote monitoring, remote search and remote control. IP Router or HUB Cable/ADSL Modem INTERNET or DDNS Server Direct LAN (Fixed/Static IP) (websamsung.net) POWER ALARM REC NETWORK POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER DIGITAL VIDEO RECORDER DISPLAY SEARCH MENU DISPLA
Краткое содержание страницы № 19
GETTING STARTED getting started STARTING THE SYSTEM 1. Connect the power cable of the DVR to the wall outlet. 2. You will see the initialization screen. LOG ON To make use of the DVR, you must log on after the system started. You must log on before you can use the features of the DVR. 1. Select a user account that you want to log on with. 2. Enter the password. LOG ON The default user is “admin” and password is “4321”. USER ID admin PASSWORD . @ # $ % & * ( ) 1 2 3 4 5 6 7 8 9 0 A B C D E F G
Краткое содержание страницы № 20
getting started LOG IN To access menu items of Logout, System Setup, Record Setup, Backup and Search, you must have logged in. 1. If you try to access restricted menus, the login dialog pops up. LOG IN 2. Select a user account, enter the password and press the USER ID admin PASSWORD button. . @ # $ % & * ( ) 1 2 3 4 5 6 7 8 9 0 The default user is “admin” and password is “4321”. A B C D E F G H I J K L M N O P Q R / S T U V W X Y Z _ a The user who has a limited access to the men
