Руководство по эксплуатации Kodak EKTACOLOR PRIME LORR CIS-267E

Краткое содержание страницы № 1

CURRENT INFORMATION SUMMARY
July 2006 • CIS-267E




Using KODAK Chemicals with

KONICA 8xx series and R1 & R2
Minilabs

The processing chemicals that you use in a particular
ORDERING KODAK EKTACOLOR PRIME
minilab system depend on the type of processor the system
LORR CHEMICALS
incorporates and its process cycle. This publication
KODAK EKTACOLOR PRIME LORR Chemicals are
describes the use of KODAK EKTACOLOR PRIME LORR
available in convenient mix sizes. The catalog numbers i

Краткое содержание страницы № 2

PROCESS SPECIFICATIONS LOW UTILIZATION The specifications and replenishment rates for using The number of prints that you produce each week KODAK EKTACOLOR PRIME SP LORR Chemicals in determines the processor utilization. If your processor the KONICA 8xx series & R1 & R2 Minilabs (process utilization is low, oxidation and evaporation will affect the specification CPK-2-22 LR) are given in Table 2. activity of your processing solutions and may increase the D-min of the paper. During

Краткое содержание страницы № 3

tanks. When you have reinstalled all the racks and have Developer Fresh Tank Solution verified that all the tanks are filled with solution, turn on To ensure good performance, take special care in mixing the the recirculation and heater system and bring the solutions developer tank solution. You should mix the developer up to operating temperature. replenisher in a separate mixing vessel from the one used for bleach-fix. USING CONTROL STRIPS TO MONITOR THE Preparing Developer Tank

Краткое содержание страницы № 4

Digital & Film Imaging Systems EASTMAN KODAK COMPANY • ROCHESTER, NY 14650 Using KODAK Chemicals with KONICA 8xx series and R1 & R2 Minilabs Kodak, Edge, Ektacolor, Prime, and Royal KODAK Publication No. CIS-267E are trademarks of Eastman Kodak Company. New 7-06 Using KODAK Chemicals with KONICA 808 and Related Minilabs ● KODAK Publication No. CIS-267E