Краткое содержание страницы № 1
Seven-Channel
Power Amplifier
Model 7200
Model 7125
Model 7075
Owner’s Manual
Version 1.0
Краткое содержание страницы № 2
Owner’s Manual Please Read First Installation Location Please Read First To assure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface capable of supporting 75 pounds or more. When placing the amplifier on a shelf, be certain that the shelf and any mounting hardware can support the weight of the amplifier and any additional items in the equipment rack, or on the shelf. When positioning the amplifier in its final location, make certain tha
Краткое содержание страницы № 3
Owner’s Manual Model 7125 Seven-Channel Power Amplifier Table of Contents Seven-Channel Power Amplifier Please Read First Table of Contents Model 7200/Model 7125/Model 7075 Seven-Channel Power Amplifier Features Congratulations! As the owner of an Outlaw Seven-Channel Power Amplifier, Unpacking you are in possession of a unique product. Designed and manufactured in the 5 Connecting Your Amplifier United States, it has been carefully designed to deliver the best possible sonic perf
Краткое содержание страницы № 4
Owner’s Manual Rear Panel Rear Panel (typical) A B C D E F G Model 7125 shown A Audio Inputs D Remote Trigger Input Use the INPUT jacks to connect to the outputs of a surround processor, Use the REMOTE TRIGGER jack to connect to a compatible processor or preamplifier, AV receiver with preout connections, DVD player with discrete other product with a 3-32 VDC output. (see page 7) five channel outputs, or HDTV product with built-in surround decoder. E Speaker Outputs (see page 5) Use the
Краткое содержание страницы № 5
Owner’s Manual Connecting Your Amplifier the other side to the black terminals. When using cable with markings on one Connecting Your Amplifier side only, traditional convention is to consider the marked side of the wire as When making connections between any source components and the ampli- the red, or positive (+) connection, and the non-marked side as the black or fier, or when making connections to any speaker, be certain that both the negative (-) connection. input devices and the ampli
Краткое содержание страницы № 6
Owner’s Manual Rear Panel Connections Rear Panel Connections (typical) – – – Connect to 12V Trigger from Pre/Pro or other device + + + + + + + – – – – – – – – + Model 7125 shown 6 Outlaw Audio + + + + – + – + –
Краткое содержание страницы № 7
Owner’s Manual Amplifier Operation Power Control Connections Amplifier Operation Your Outlaw amplifier features a built-in remote turn-on system that will auto- After all connections have been made you are ready for listening. First, turn on matically switch the unit on when another device in the system is switched on. the source components and processor in your system. It is always a good idea to turn on your amplifier LAST. This avoids the possibility of any turn-on pops Remote Turn-On Usin
Краткое содержание страницы № 8
Owner’s Manual Troubleshooting Troubleshooting Guide Problem Solutions Amplifier will not turn on Master Power Switch turned off (No power light LED) Turn on Master Power Switch Amplifier will not turn on Remote trigger cable not properly connected Verify connection of trigger cable at both ends Amplifier turns on, but no audio from one or more channels Input plugs not connected to proper jack or are loose Check input connections No audio from one or more channels Speakers not connected pro
Краткое содержание страницы № 9
Owner’s Manual A Few Words About Hum and Noise tical and expensive. In some cases, the use of an approved AC Power Isolation Potential Ground Loops in a Complex A/V System Transformer of sufficient capacity may solve this problem. Suggestion #1 Warning: if you suspect that the grounding system in your home’s electrical To determine if a cable TV connection is responsible for the hum, first turn all wiring is causing the hum problem, it is important that you do not make any components off. Di
Краткое содержание страницы № 10
Owner’s Manual Specifications Specifications Model 700 Model 71 5 Model 7075 Power Output (all channels driven) 7 x 200 watts RMS @ 8 ohms 7 x 125 watts RMS @ 8 ohms` 7 x 75 watts RMS @ 8 ohms FTC: 20Hz to 20kHz, < 0.05% THD; FTC: 20Hz to 20kHz, < 0.05% THD; FTC: 20Hz to 20kHz, < 0.05% THD; 7 x 300 watts RMS @ 4 ohms 7 x 190 watts RMS @ 4 ohms 7 x 115 watts RMS @ 4 ohms FTC: 20Hz to 20kHz, < 0.05% THD FTC: 20Hz to 20kHz, < 0.05% THD FTC: 20Hz to 20kHz, < 0.05% THD Frequency Response (a
Краткое содержание страницы № 11
Owner’s Manual Outlaw Audio Limited Warranty The Outlaw Audio 0-Day Satisfaction Guarantee This product is guaranteed to satisfy all your needs for a high performance If you decide to return the amplifier, the only cost you will be responsible for power amplifier. If for any reason, you are not completely satisfied with it, is the shipping charge to return it to us. When your amplifier arrives, we will please contact us at 866-OUTLAWS (688-5297) within 30 days of receipt of inspect it to ins
Краткое содержание страницы № 12
