Краткое содержание страницы № 1
PORTABLE DATA COLLECTION
-
0010 DOCUMENT NUMBER: 350600
PT600
TERMINAL
USER’S GUIDE
Краткое содержание страницы № 2
NOTICE The unit is equipped with a NiMH battery pack, however it may not be powered on due to putting in storage for a period of time. In the case of above situation C - DC adapter and recharge the NiMH about hours or put into cradle about hours - DC adapter before using the unit. for charging reference) chapter 2.4 (please refer to with 12V AC 2.5 14~16 battery pack happened, plug in an 9V A discharging of the battery by
Краткое содержание страницы № 3
Page Chapter 1 ................................ .......... 1 1.1 Technical Specification ................................ 2 1.2 Interface Ports ................................ ............. 8 1.3 Using the Keyboard ................................ ..... 9 1.4 Triggering Scanner Module .......................... 11 1.5 Applic ation Development Environment ........ 12 1.6 Optional Charging/Communication Cradle ... 1 3 Chapter 2 ................................ .
Краткое содержание страницы № 4
Introduction The PT600 Portable Data Terminal, referred as PDT hereafter, with integrated laser scanner or pen scanner is a , compact and lightweight hand - held data collection terminal with good reliability, flexibility an d maintainability. Its compact size and form makes it even fits in your packet. The PDT incorporates a DOS - based system and provides users a PC compatible environment to develop and use the device. This terminal is well suited for transportation, warehouse distr
Краткое содержание страницы № 5
SOFTWARE PROGRAMMING TOOLS C, Turbo C, Visual C) - - - 16 - .5MB SRAM - 26 alphanumeric rubber keys with one laser trigger 100x65 pixel graphic backlit LCD with selection between 12 - c olumn by 4 - line in 8x16 font and 16 - column by 8 - line in 6x8 font by menu setup or system BARCODE SYMBOLOGY - A/E, EAN - 8/13, Codabar, Code128, Code39, Code39 with full ASCII, ITF, China postal code, CAL AND ENVIRONMENT ° C ~ 50 ° C (32 ° F ~ 1
Краткое содержание страницы № 6
- connector, Support TX/RX, CTS/RTS, GND, up to 57.6Kbps Kbps ) One IR port, Support TX/RX, to 57.6 K bps Xon/Xoff or CTS/RTS - - - 5 AC/DC adapter @ 9 DOCKING STATION PT600 - - - AC/DC adapter @ 12 • MS - • - • - • contrast • - - 3 - off point. System resumes from the last turn Software adjustable beeper volume and LCD driven user configuration interface Menu discriminated ologies auto Reads all major bar cod
Краткое содержание страницы № 7
• - - • l • Scan rate • ± 65 ° • ± 55 ° • - P • o l u • • Scan rate 5 - • 45 ° ~ 135 ° • Diagram shown with a Built - in Integrated Laser scanner Skew Tolerance 55° 65° 55° 65° Right side view of PDT Top view of PDT - 4 - Label Label Barcode Barcode Scan Beam Scan Beam Pitch Angle Print Contrast Ratio 0.5 min Reading Angle /sec 200 cm 0.1mm(0.04inch) Dept of field 0.12mm(5mil) tion Res Scanner en on clip Integrated 60mA typ.@5V Power con
Краткое содержание страницы № 8
- 5 - diagram Depth of Field
Краткое содержание страницы № 9
- 6 -
Краткое содержание страницы № 10
Diagram shown with a clip - on pen scanner 45° 45° - 7 -
Краткое содержание страницы № 11
The PT600 has a RS232C serial port with miniature RJ10 connector, Communication by Infrared LED which on the left side of lower cabinet 1 DC9 V 2 TXD Output 3 4 N.C. 5 6 N.C. 1 10 7 CTS 8 RTS Output 9 N.C. 10 N.C. PDT. RS232 cable TELEPHONE LINE RS-232 PORT - 8 - MODEM SYSTEM COMPUTER MODEM ut/output devices to the The diagram below shows the way to connect inp Request to send Clear to send Input Ground Reference GND Receive d
Краткое содержание страницы № 12
The keypad of PT600 consists of 27 rubber keys, the key is used to switch on/off the unit and other 26 keys are used to control the unit and key in data. The use o f keyboard is categorized to th ree modes: , , and . All keys except key may produce a sound (tone) when pressed. Keys of upper four rows have - [ ] is off, pressing the l turn on the unit. On the other hand, when the unit is on it is needed to press Pressing the key sets the keyboard to Command ver p
Краткое содержание страницы № 13
Краткое содержание страницы № 14
Press [ALPHA] key to toggle between normal mode and alpha mode of keyboard. In alpha mode, the cursor is an underscore sign and the keyboard is available to i nput upper case letters. In alpha mode, every numeric key contains 3 characters individually. Pressing the key [è] and [ ç] to choose among three First press [ALPHA] to switch the system to alpha mode, the cursor type will be changed ç è The PT600 c an be used with a built - in i r - on pen scanner m
Краткое содержание страницы № 15
The system of PT600 provides DOS functions and device drivers for application development, including bar code decoding, keypad input, display output, serial input/output communication, real - - a - - Plus and DOS - based JobGen Pro program generation software. It can C, Borland C and Turbo C. Pro, JobGen Plus or created by a compiler is downloaded to the unit and - - - use and comprehensive termina l application developing environment. Through the use of JobGen Plus, user c
Краткое содержание страницы № 16
An optional charging/communication cradle (dock station), PT016, has been incorporated a quick charge circuit that th e NiMH battery pack about 2.5 hours . Regular charging time of the battery pack through DC power adapter is about 14~16 hours. The cradle also allows users to link - - point RS - 232 or multi - RS - 422 connection for data communication. The cradle with internal POINT-TO-POINT RS232 Connection SYSTEM MULTI-POINT RS422 Connection SYSTEM - 13 - COMPUTER RS422 int
Краткое содержание страницы № 17
The PDT is operated by a rechargeable NiMH battery pack with two AA size 1.2V 1500mAH capacity or two AA alkaline batteries for the main An onboard 3V 190mAH Lithium battery (CR2032) is used as the - - up RTC and RAM and puts the Lithium battery in standby state. When the main power source is removed or below t he level to back - up the RAM and RTC properly, the power circuit of the PT600 automatically switches to the Lithium battery for back up. It is recommended
Краткое содержание страницы № 18
When the main battery low condition occurs, the main battery can continue to supply power for about 10 ~ 30 minutes, however the unit Meanwhile the unit continues to back - up the data contents in RTC and WARNING ! enough capacity to back up the system, the LITHIUM BATTERY LOW the unit is powered on . In this situation you should upload your data from the PDT immediate ly and replace a new 1. 2. 3. 4. - 15 - Insert the new main battery packet:
Краткое содержание страницы № 19
f rom s battery change . b attery . e backup Y our d 1. Refer to the procedure in previous paragraph, un - screw the backup ** Make sure to back up your data in PDT before making the - 16 - replacement the lithium back up battery. 3. Put the battery cover back. 2. Insert a new battery into the holder with correct orientation. ttery. battery cover and as illustration above to remove the lithium ba Lithium Back up Battery first. ata : Not Lithium
Краткое содержание страницы № 20
When the PDT sh ows “Main battery low” or sign , the battery pack in PDT needs to be recharged. There are two ways to charge the Inner shell Outer shell Plug one end of an AC - 9VDC power adapter into the DC - jack of RS 232 cable and the other end into a wall outlet. The battery pack will be fully 14~16 Quick Charging with PT016 AC to 12V DC Negative(-) Transformer Connect power adapter to PT016 and insert PDT into the chamber of PT016. The battery of PDT can be fully charge
