Руководство по эксплуатации Yamaha RX-V467

Краткое содержание страницы № 1

Firmware Update Procedure for RX-V467/RX-V567


September, 2010

Subject: RX-V467/RX-V567 Firmware Update Version F018
(Including HTR-4063/HTR-5063)

Yamaha is pleased to offer the following firmware update to ensure the best possible
performance and features for your Yamaha RX-V467/RX-V567 AV Receiver. This
firmware adds 3D video pass-through capability for the HDMI connections and improves
stability with 3D signals from DirecTV set-top boxes.
Requirements:
A personal computer capa

Краткое содержание страницы № 2

Firmware Update Procedure for RX-V467/RX-V567 Instructions for Firmware Update: STEP1 CREATE UPDATE DISC Download the firmware from YAMAHA website. Unzip and burn the WAV file onto CD-R/RW as an Audio-CD. This will be your update disc. If you need instructions on creating this firmware update CD, see your Personal Computer ("PC") CD burning software instructions on how to burn WAV file as an Audio CD. Note: Conventional CD burning software is recommended. An audio CD burne

Краткое содержание страницы № 3

Firmware Update Procedure for RX-V467/RX-V567 STANDBY/ON INFO TONE CONTROL STRAIGHT STEP3 ENTER FIRMWARE UPDATE MODE Plug the AC power cable of the AV receiver. Press and hold the [STRAIGHT] button on the front panel and keep it pressed while you press the [STANDBY/ON] button. Once the front panel displays "Advance Setup", release the [STRAIGHT] button. Then, press and hold the [INFO] button for about 3 seconds until front panel displays “CDDA

Краткое содержание страницы № 4

Firmware Update Procedure for RX-V467/RX-V567 STEP5 CHECK UPDATED VERSION Press and hold the [STRAIGHT] button on the front panel and keep it pressed while you press the [STANDBY/ON] button. Once the front panel displays "ADVANCED SETUP", release the [STRAIGHT] button. Then, press and hold the [TONE CONTROL] button for about 3 seconds until front panel displays “M:F018 66A8”. F018: version of firmware 66A8: checksum If your firmware version number and checksum don't match, retry

Краткое содержание страницы № 5

Firmware Update Procedure for RX-V467/RX-V567 IN CASE OF ERROR Case1 Display on the receiver “CDDA Upgrader” doesn’t change after playing the BD/DVD/CD player. Check digital cable wiring. Only optical or coaxial connection can be used for this update. HDMI connection will not work. Check digital out setting. When using DVD/BD players, make sure the digital out is set to “PCM”. Once update is completed, reset DVD/BD player to its original settings. Check update disc. Make