Краткое содержание страницы № 1
U C A
RX-V620
Natural Sound AV Receiver
Ampli-tuner audio-vidéo
OWNER’S MANUAL
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
MODE D’EMPLOI
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VAL
Краткое содержание страницы № 2
SAFETY INSTRUCTIONS 8 Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For CAUTION example, the unit should not be situated on a bed, sofa, rug, RISK OF ELECTRIC SHOCK or similar surface, that may block the ventilation openings; or DO NOT OPEN placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation CAUTION: TO REDUCE THE RISK OF openings. ELECTRIC SHOCK, DO
Краткое содержание страницы № 3
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English SAFETY INSTRUCTIONS EXAMPLE OF ANTENNA GROUNDING 19 For US customers only: Outdoor Antenna Grounding – If an outside antenna is connected to this unit, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the ANTENNA MAST LEAD IN National Electrical Code, ANSI/NFPA 70, provides WIRE information with regard to
Краткое содержание страницы № 4
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this 15 Do not attempt to modify or fix this unit. Contact manual carefully. Keep it in a safe place for future qualified YAMAHA service personnel when any reference. service is needed. The cabinet should never be opened for any reasons. 2 Install this unit in a well ventilated, cool, dry, clean place with at least 30 cm on the top, 20 cm on the 16 When not planning to use this unit for long periods r
Краткое содержание страницы № 5
BASIC ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERATION OPERATION INFORMATION APPENDIX English INTRODUCTION CONTENTS INTRODUCTION ADVANCED OPERATION FEATURES ............................................................ 2 SET MENU .......................................................... 35 GETTING STARTED ........................................... 3 Adjusting the Items on the SET MENU ................. 35 Checking the Package Contents ............................... 3 1 SPEAKER SET (speak
Краткое содержание страницы № 6
FEATURES Built-in 5-Channel Power Amplifier Sophisticated AM/FM Tuner u Minimum RMS Output Power u 40-Station Random Access Preset Tuning (0.06% THD, 20 Hz – 20 kHz) u Automatic Preset Tuning [U.S.A. and Canada models] u Preset Station Shifting Capability (Preset Main: 100 W + 100 W (8 Ω) Editing) Center: 100 W (8 Ω) Other Features Rear: 100 W + 100 W (8 Ω) u 96-kHz/24-bit D/A Converter [Australia, Singapore, China and General u “SET MENU” which Provides You with models] 10 Items for Optimizing
Краткое содержание страницы № 7
BASIC ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERAIONT OPERATION INFORMATION APPENDIX English GETTING STARTED Checking the Package Contents Check your package to make sure it has the following items. Remote control Batteries (4) AM loop antenna (AAA, R03, UM-4) Quick Reference Card Quick Reference Card Indoor FM antenna (U.S.A., Canada, China and General models) A/B/C/D/E (Australia and Connection guide Singapore models) n Changing batteries Installing Batteries in the Remote As the batter
Краткое содержание страницы № 8
CONTROLS AND FUNCTIONS Front Panel 1 2 3 4 5 6 VOLUME DIGITAL DIGITAL SURROUND STANDBY /ON INPUT MODE 6CH INPUT BASS BASS TREBLE SPEAKERS INPUT EXTENSION DSP PRESET TUNING AB EFFECT PROGRAM /TUNING FM/AM MEMORY MODE EDIT MAN'L/AUTO FM AUTO/MAN'L MONO ON OFF – + – + ON OFF PHONES S VIDEO VIDEO L AUDIO R OPTICAL SILENT VIDEO AUX q yu p 7 8 9 0 w er t i o 1 STANDBY/ON 5 VOLUME Turns on or sets this unit in the standby mode. When you Controls the output level of all audio channels. turn on this
Краткое содержание страницы № 9
BASIC ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERAIONT OPERATION INFORMATION APPENDIX English CONTROLS AND FUNCTIONS 8 BASS r Multi jog knob Adjusts the low-frequency response for the left and right Selects the tuning frequency in the tuning mode. main speakers. Selects the preset station after pressing PRESET/ Turn the control to the right to increase or to the left to TUNING (EDIT) to display “ z ” in the tuning mode. decrease the low-frequency response. Selects the DSP program after pr
Краткое содержание страницы № 10
CONTROLS AND FUNCTIONS Remote Control This section describes the basic operation of this unit with 3 Numeric buttons (Input selector buttons) the remote control. First, set the selector dial to the AMP/ These buttons select the input source. TUN position. See “REMOTE CONTROL FEATURES” See “Description of the Numeric Buttons” for the for full details. numeric buttons. 4 6CH INPUT Selects the source connected to the 6CH INPUT jacks. 1 0 5 TEST 2 q Outputs the test tone. Select the 6 ON SCREEN AMP/
Краткое содержание страницы № 11
BASIC ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERAIONT OPERATION INFORMATION APPENDIX English CONTROLS AND FUNCTIONS i VOLUME +/– n When selecting a DSP program Increases or decreases the volume level. and turning on or off the effect speakers (center and rear) o MUTE Mutes the sound. Press again to restore the audio output A B to the previous volume level. EFFECT Switches the effect speakers (center and rear) on and off in the following cases: • When the selector dial is set to the DSP/TU
Краткое содержание страницы № 12
CONTROLS AND FUNCTIONS n When selecting a preset station Using the Remote Control number DIGITAL DIGITAL SURROUND – + – + Approximately 6 m (20 feet) 30° 30° 1 Set code number “0023” in the AMP/TUN (or DSP/TUN) position. See “Setting the Manufacturer Code” for setting the code. The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote 2 Set the selector dial to the AMP/TUN (or control sensor on the main unit during operation. DSP/TUN) posi
Краткое содержание страницы № 13
BASIC ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERAIONT OPERATION INFORMATION APPENDIX English CONTROLS AND FUNCTIONS Front Panel Display 1 2 4 5 6 7 8 3 V-AUX VCR2/DVR VCR 1 D-TV/CBL DVD MD/CD-R TUNER CD PHONO VIRTUAL DIGITAL DOLBY DIGITAL MOVIE THEATER 1 2 TUNED STEREO AUTO MEMORY PRO LOGIC DTS ENTERTAINMENT SLEEP PRO LOGIC DSP VOLUME dB SP ms PCM AB 9 0 q w e r t 1t indicator 9x indicator Lights up when the built-in DTS decoder is on. Lights up when you select a DSP program. 2
Краткое содержание страницы № 14
CONTROLS AND FUNCTIONS Rear Panel 1 2 3 4 5 6 7 8 9 SPEAKERS DVD DIGITAL GND + – – + R L INPUT TUNER CD AM ANT GND FM ANT A D-TV/CBL COAXIAL 75 UNBAL. MAIN OPTICAL AC OUTLETS MONITOR OUT D-TV/CBL YPB/CB PR/CR COMPONENT VIDEO B 6CH INPUT DVD D-TV/CBL VCR 1 VCR 2 IN OUT IN OUT MONITOR OUT MAIN SURROUND CENTER /DVR SWITCHED DVD L L 100W MAX. VIDEO TOTAL CENTER + – MD/CD-R IMPEDANCE SELECTOR S VIDEO SET BEFORE POWER ON R R SUB WOOFER MAIN A OR B: 4 MIN. /SPEAKER MAIN A OR B: 8 MIN. /SPEAKE
Краткое содержание страницы № 15
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English PREPARATION SPEAKER SETUP Speakers to Be Used Speaker Placement This unit has been designed to provide the best sound- Refer to the following diagram when you place the field quality with a 5-speaker system, using left and right speakers. Main speaker (R) main speakers, left and right rear speakers, and a center speaker. If you use different brands of speakers (with Rear speaker (R) different to
Краткое содержание страницы № 16
CONNECTIONS Before Connecting Components CAUTION Never connect this unit and other components to mains power until all connections between components have been completed. • Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some components require different connection methods and have different jack names. Refer to the operation instructions for each component to be connected to this unit. • When you connect other YAMAHA audio com
Краткое содержание страницы № 17
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English CONNECTIONS SUBWOOFER MAIN OUTPUT OUTPUT OUTPUT CD player External decoder COAXIAL OUTPUT L R C L R L R SURROUND CENTER OUTPUT OUTPUT DVD DIGITAL GND INPUT TUNER AM ANT GND FM ANT CD D-TV/CBL COAXIAL 75 UNBAL. OPTICAL MONITOR D-TV/CBL OUT YPB/CB PR/CR COMPONENT VIDEO 6CH INPUT DVD D-TV/CBL VCR 1 VCR 2 IN OUT IN OUT MONITOR OUT MAIN SURROUND CENTER /DVR DVD L L VIDEO MD/CD-R S VIDEO R R SUB
Краткое содержание страницы № 18
CONNECTIONS Connecting Video Components n About the video jacks There are three types of video jacks. Video signals input through the VIDEO jacks are the conventional composit video signals. Video signals input through the S VIDEO jacks are separated into luminance (Y) and color (C) video signals. The S-video signals achieve high-quality color reproduction. Video signals input through the COMPONENT VIDEO jacks are separated into luminance (Y) and color difference (PB/CB, PR/CR) video signals. Th
Краткое содержание страницы № 19
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English CONNECTIONS Monitor OPTICAL COMPONENT COMPONENT OUTPUT OUTPUT INPUT DVD player AUDIO S VIDEO VIDEO S VIDEO VIDEO OUTPUT OUTPUT OUTPUT INPUT INPUT V O L R S V S DVD DIGITAL GND INPUT TUNER AM ANT GND FM ANT CD D-TV/CBL COAXIAL 75 UNBAL. OPTICAL MONITOR D-TV/CBL OUT YPB/CB PR/CR COMPONENT VIDEO 6CH INPUT DVD D-TV/CBL VCR 1 VCR 2 IN OUT IN OUT MONITOR OUT MAIN SURROUND CENTER /DVR DVD L L VIDEO
Краткое содержание страницы № 20
CONNECTIONS Connecting the Speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION • Use speakers with the specified impedance shown on the rear panel of this unit. • Do not let the bare speaker wires touch each other and do not let them touch any metal part of this
